Question about Punch Professional Home Design Platinum Suite (26635)

1 Answer

Cannot register When I open my new Punch! home design platinum program, it asks me to register, or use the trial. I type in my info and click to register, but i cannot get any browser window to pop up, let alone make it to the actual registration page. (the way it is set up is, you click on register, then a browser window pops up, you fill out the info, get an e-mail with a registration number and then you plug that into the registration number option in the program.) I have turned off all virus protection, and pop up blockers, and anything that could prevent it from bringing up the browser window, and even tried to reinstall three times, and still nothing. Help me please. Adam

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 60 Answers

You can register your Punch! product online at:
http://punch.custhelp.com/cgi-bin/punch.cfg/php/enduser/acct_new.php

Posted on Jun 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Program will not start


Try to Uninstall the program with Revo uninstaller and then install it Fresh. Also make certain your Graphics Card is up to date with the current drivers and that it is capable of managing that program. If a Computer is Old the BIOs may not be updated and accept the commands necessary to operate the program.

Jan 04, 2014 | Punch Professional Home Design Platinum...

1 Answer

Software will not load on windows 7


Your best option is to start with the software supplier.

I have used some of the older versions of this software and I was not all that impressed as i too had some issues but more to do with printing and the C&P functions.

You dont say which version of windows 7 home basic,home, pro etc.
BUT windows 7 does have a compatibility mode that does allow you to run a program as if it was running under XP, Vista etc. you may want to explore that option

Go to the windows HELP option and type in "program compatability"
From there you should be able to get along and see if the program needs anything else or will run under a particular mode.
Note that you may have to try more than one mode until you find one that works.

Nov 25, 2011 | Punch Professional Home Design Platinum...

1 Answer

Punch failed to open dib file error


Try to run it as administrator, if that does not work, reinstall the program.

Apr 22, 2011 | Punch Professional Home Design Platinum...

1 Answer

HAVE PROGRAM BUT NOT CONNECTED TO INTERNET DO NOT WANT PROGRAM TO END IN SEVEN DAYS - NOT WARNED OF THIS ON EXTERNAL VEIWABLE PORTION OF PACKAGING; FOUND ON PAGE 5 AFTER OPENING BOOKLET. NEED CODE TO...


You can contact PUNCH via email

http://www.punchsoftware.com/p-13-home-and-landscape-design-professional-v2.aspx

At the bottom of that page are the support links

Email them and they will supply you with a code that you can enter to stop the countdown

Note that this only works if you have purchased the software.

Mar 16, 2011 | Punch Professional Home Design Platinum...

1 Answer

Punch software 5in1 Home and deck Design


Did you try running the program in "Compatibility Mode"?
Right-click on the shortcut
Select "Properties"
Select "Compatibility"
Check off "Run this program in Compatibility Mode for"
Then chose Windows XP SP3

Keep trying different options until the program responds the way it should.

If you are satisfied with my answer, be sure to click on the "Thumbs-Up". If you have further questions, please feel free to ask them. Thanks for using our service!

May 16, 2010 | Punch ! 5 in 1 Home Design for PC

2 Answers

My punch professional home design suite platinum version 12 will not work on my laptop with windows 7. Is there a way to get it to work? I cannot afford to buy a newer version and don't believe I should...


The only way you can get this software to work on your pc is by 2 ways:

1) Easy way: Calll PUNCH the manufacturer of this software and ask them if there is a patch or new software to purchase that is compatable to winodws 7

2) Hard way: You may need to make a dual boot hard drive with 2 operating systems on one hard drive. You may need to create a partition, then install the old Windows Vista on the new partition and learn to boot one or the other os when you need to use the punch software.

Please write back which one you want to do so I can help you with either one.

May 03, 2010 | Punch ! Home Design Architectural Series...

1 Answer

I am trying to figure out if I want to purchase the Punch Professional Home Design Platinum program. I would like to see what the users guide says about framing before I make the investment. Can I see a...


Here is a link to download the program and try it out for free http://download.cnet.com/Punch-Professional-Home-Design-Platinum-Suite/3000-6677_4-10392673.html#rateit

Unfortunately looking at some of the user reviews I found that people have complained a lot about the usability if the program and the poor user manual. Hopefully you will be able to make an informed decision about the program by trying it out in demo version. Happy computing.

-CompDoc

Mar 02, 2010 | Punch Professional Home Design Platinum...

2 Answers

Ceiling design Plank and beam with pitch


I am not sure what Punch Plat you are using, however these are some notes and solutions that may help
1 - Crown moldings in Punch don't slope
2 - Ceiling beams --> check your Power Tools--> If your version has the Celing designer, you can use this tool to create the beams--> or use solution # 3
3 - Ceiling beams --> you can cevelop them in the 3D Workshop Power Tool --> set the pitch--> texture as necessary
4 - You will find ready to use beams in --> Obejcts--> Faux Wood beams

Aug 05, 2008 | Punch Professional Home Design Platinum...

1 Answer

Problem running 3d view punch home design suite platinum


Looks like your design is under the 0.00 level
Check the elevation of your drawing (walls, floors, etc)

Mar 09, 2008 | Punch Home & Lifestyle Software

Not finding what you are looking for?
Punch Professional Home Design Platinum Suite (26635) Logo

Related Topics:

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Punch Home & Lifestyle Software Experts

Cindy Wells

Level 3 Expert

4753 Answers

k24674

Level 3 Expert

7987 Answers

Florin

Level 3 Expert

733 Answers

Are you a Punch Home and Lifestyle Software Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...