Question about Amplifiers & Preamps

2 Answers

Sansui receiver takes more than five minutes to start

Hi Sir,
My 30-year old Sansui receiver model G7500 takes more than five minutes to turn on the green ligh, when the green light turns on everything is fine. When the green light is on, I turn it off and turn it on, it takes only few seconds.
Would you suggest me what cause this problem and how to fix and what parts should be replaced.

Thank you vere much
HUY LAM

Posted by on

  • acdy188 Jun 11, 2008

    Hi Sir,

    Thank you for giving me quick answer but I think my problem is not the green light, the problem is I have to wait more than 5 minutes to warm up the receiver after that the green light will turn on, everything will work perfectly. Do you think a relay transistor, capacitor will cause this problem?

    thank you again.

    H Lam

×

2 Answers

Dear Headman,
Thank you very much for your suggestion to solve the problem. When I turn on the power switch all lights are on except the green light that indicate the receiver is ready to function. in normal, it will turn on after 20 seconds, now I have to wait more than 5 minutes. I have replaced some transistors and capacitors. It seems better. Before I replaced these things, it would not start even waiting for more than half hours.
I want to replace two more things, I think it might help. it is a square black thing with four legs, one of the legs connected to the hole has + sign, the other 3 legs to the holes without any sign. It has # RB152 BNC it might be a rectifier and a capacitor 1000uF 63V with 3 legs at the bottom. the leg in the center connected to negative sign, I have not seen a capacitor like this before. These things might relate to power supply as you mentioned in your email. Please show me where I can get them.
I am not a electronic professional or repairman, just a hobbyist, I learn some electronic courses a long time ago. I really appreciate you remind me for my personal safety. I will remember your advice.
Sincerely,
H. Lam

Posted on Jun 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

You should replace the green light (led).

Posted on Jun 11, 2008

  • Jimix Eouex
    Jimix Eouex Jun 12, 2008

    If that is the case i would suggest that you check the power supply of your receiver. Here's how you do it, turn on your receiver then find a station. If you fail to find one, before the green light turns on maybe your power supply is in trouble. If you don't have enough knowledge on electricity i cannot suggest you to check the output of your power supply because it is very harmful to do so. You better have someone to do it for you.

    I hope this is helpful.

    Please rate me if it done good to you.

    Thanks!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where to find the owners manual for the Sansui QRX 7500A?


Sansui QRX-7500 Manual - Four Channel Receiver - HiFi ...

www.hifiengine.com/manual_library/sansui/qrx-7500.shtml
May 21, 2014 - sansui qrx-7500 four channel receiver. Sansui QRX-7500 ... service manual English - honestsoul99. Related Catalogues. HiFi Buyers Guide.

Sansui ' Hifi Manuals Free: Service Manuals, Owners ...


Dec 19, 2015 | Amplifiers & Preamps

1 Answer

What are the sound transters number for the sansui aux410r


The audio output transistors probably are identified with proprietary Sansui part numbers. You will have to contact Sansui to identify equivalent parts.

Feb 14, 2015 | Amplifiers & Preamps

1 Answer

I just connected two sets of 901'a to Sansui G901 receiver. The sound is TINNY no bass at all. I've tried different connections and nothing seems to work. I've used two different EQ from bosse series


Either there is NO bass on the recordings (if you listen to it with headphones does it have bass?) ...OR...you've wired them out of phase. Connect only one(1) Bose 901's to just one side. Is there bass? Then connect the other side. IS there bass? If not reverse the phase (+ /- connections) and see if the bass comes back. Once that is done and there is BASS, then add the 3rd and then the 4th speaker. .Are you sure your Sansui can handle a lower than 4 ohm load???

Jun 19, 2014 | Amplifiers & Preamps

1 Answer

Need Sansui C-1000 Audio Amplifier Comcast 5-digit remote code.


Hello
Try these linkd to download the code list [5 digits] for Comcast. copy and paste the link into your browsers' address bar and press enter, if you do not get it as a link from here.

digitalnow.comcast.com/Contents/DTARemoteGuide.pdfSimilar
www.comcast.com/.../Digital.../Digital.../remotes/Remote_M1067BX...Similar
http://www.dataentryjobs.us/67948.html
www.ua.edu/.../aux.../trouble-shooting-and-remote-programming.pd...Similar
http://www.dslreports.com/forum/r20052833-Comcast-remote-setup-question


Feb 28, 2012 | Amplifiers & Preamps

1 Answer

9900z sansui power amp parts


Hello
The spare parts for most of the audio systems are available from most of the electronic spare part selling shops at your town. If you feel any difficulty it getting the parts, you can contact the nearest authorised service center for Sansui at your town. OK.

Jan 24, 2012 | Amplifiers & Preamps

1 Answer

Require potentiometer for old sansui amplifier. Sansui part number 46159900. This is the number on the edge of the potentiometer. Not sure what the ohmic value is.


You will have better luck finding it if you describe what control it is and what model it is from. Can you please update this with that info?

Thanks,
Dan

Aug 29, 2009 | Amplifiers & Preamps

1 Answer

Remote codes for sansui audio products


only a sansui remote can replace itself, sansui is a great company and prides itself on being unique, you would have to order a remote directly from the maker if possible to use all the function of your unit. even if u get a universal unit to program it probably won't control all of ur function.

Jul 20, 2008 | Amplifiers & Preamps

1 Answer

Spares


Bass Treble,bal controls can be clened with contact cleaner.
Drive belts audio heads may be available at the sansui web site or mcm electronics.com.
GOOD LUCK
BIGRED

Apr 01, 2008 | Amplifiers & Preamps

Not finding what you are looking for?
Amplifiers & Preamps Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amplifiers & Preamps Experts

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you an Amplifier and Preamp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...