Question about Sharp AL-1642CS Copier

1 Answer

Tray 1 is full on my Sharp AL-1642CS but when it ties to print to tray 1 the 'P' keeps flashing!

Tray 1 is full on my Sharp AL-1642CS but when it ties to print to tray 1 the 'P' keeps flashing and won't allow me to switch to a different tray. I have to shut it off to reset it. Even though I have tray 2 as default in the printer settings on my computers it doesn't always send printing to tray 2 (depends on program).

Sharp won't help, they want me to send the printer back with $175 before they will help! How can I reset this wrongly flashing 'P' (out of paper code) to get things back to normal? Or how can I reset tray 2 as the default in the printer itself?

Posted by on

  • HughA69 Jul 19, 2008

    Thank you for the answer, unfortunately there are not sensors showing any where. There was nothing hanging down, I don't even see anything that might be considered a sensor.



    This is really a pain in the ****! I guess I'll have to bite the bullet and take it somewhere for repair.



    Thanks again for your help!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 53 Answers

Pull both trays out.....have a look in tray 2, is there a switch sensor actuator hanging down yes........is there a similar one in tray one?
No? They get knocked off and lost very easily

Posted on Jul 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the sharp al-1642CS and need to print ups full sheet labels for shipping. Tray 1 will not pick up the labels and jams. I can not get the sharp to print via the multi-tray when I send a job from my...


Will the tray not pick them up at all, or do they feed out about 2 inches? If they feed out of the tray and will not get past the curved area you need to open that door where the jam is and make the spring pressure on those springs on each side tighter. I kind of loop the bottom hook of the spring up into the rest of the spring to create more spring pressure on the rolls and then it should work.

May 19, 2010 | Sharp AL-1642CS Copier

2 Answers

I have a sharp al-1642cs that will not work it just keep flashing L1 can you help


www.cyberscholar.com/sharp/resources/cop_man_soho_AL1642CS.pdf
http://www.service-docs.com/store/catalogue.php?cat=281&exp=0&resultpage=10 L1 00 Feeding is not completed L1 00 Feeding is not completed
within the specified time
after starting feeding.
(The scan head locking
switch is locked)
1.unlock Scanner unit
2. chang connecter
Scanner unit


May 09, 2010 | Sharp AL-1642CS Copier

2 Answers

Sharp AL1642CS makes clicking sound when rollers turning


If you are in the US then go to sharpusa.com business copiers and locate dealers

Nov 21, 2009 | Sharp AL-1642CS Copier

1 Answer

Printing documents with wide margins on letter paper


Did you try to reduce the document down so it would fit a standered size paper???

Sep 29, 2008 | Sharp AL-1642CS Copier

1 Answer

Warm up noises


the only thing I can think of is the paper tray trying to lift up during warm up and there is a gear slipping but catches itself which is why you dont hear it again??

if you open the trays and close them does it do it??

Aug 27, 2008 | Sharp AL-1642CS Copier

1 Answer

Sharp al-1250 wont switch from tray 1 leter to tray 2 legal when printing


On the control panel there should be a button that either says paper select or looks like a bucket with lines in press this and the machine will change paper trays.

Thanks J

Dec 11, 2007 | Sharp AL-1250 Laser Printer

2 Answers

"Scanning in progress" reported even when I'm not scanning anything


You need to install the print driver and Sharpdesk before you connect the USB cable.

Dec 10, 2007 | Sharp AL-1642CS Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...