Question about Audio Players & Recorders

Open Question

SANSUI SAN0669 I've bought a subwoofer without cords how do i hook it up to stereo or VCR Thanks

Posted by on

1 Suggested Answer

  • 2 Answers

SOURCE: connect powered subwoofer

  • If your receiver has a dedicated subwoofer line level output, we recommend connecting your subwoofer to this jack. Most receivers will have just one (mono) subwoofer output, while quite a few subs require two inputs. You can use an RCA "Y" adapter cord , which is a cable with one female RCA jack at one end, and two male RCA plugs at the other. Some receivers require menu settings (such as "sub-on" or "front speakers-small") that must be made before the sub output will be active.

  • Posted on Jan 07, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Just bought a Mackie profx16 with two speakers and a Mackie srm1801 subwoofer. how do I hook them up together?


    If you bought it short ago and can return it, i would do it, and buy a better mackie mixer without the bad soundinding dsp on it. But you have to buy another cable or just a direct plug on connector

    Oct 07, 2014 | Audio Players & Recorders

    1 Answer

    How to hook up the wires for aux through phone which wires go where, there are so many colors


    I dont think a cell phone can push enough juice for household speaker or stereo system...can it? Its why we have to buy accessory speakers with amplifiers in them.
    Not 100 percent sure tho

    Sep 09, 2014 | Audio Players & Recorders

    1 Answer

    Speaker system


    It depends on the speaker system. Give us the make and model and then we can help you.

    Aug 31, 2014 | Audio Players & Recorders

    1 Answer

    I have a s108sp subwoofer with a right and left input assuming this is for a cable going to one input on my Sony reciever. The subwoofer also has inputs for speakers. Do I plug the speaker wires into...


    Hey there houleo!
    If your subwoofer has a stereo input and stereo outputs, then it's a good idea to send the signal from your receiver to the sub, then out to the other speakers you have hooked up. Some subwoofers will take the low frequencies out of the signal to the left and right speakers, so that the sub handles it alone. This often gives a nice crisp sound.
    Reciever/amplifier
    l l l l V V Subwoofer l l l L------> Right speaker
    V Left speaker
    If this helps you out, I'd appreciate if you rated me well :) If you've got any more questions, feel free to ask! Cheers! -The Chicken

    May 26, 2011 | Acoustic Research S108PS Subwoofer

    1 Answer

    I just bought a receiver, Turntable, and bookshelf speakers. Everything got hooked up but I have serious distortion coming from the speakers. Did I hook it up wrong? What could cause this and how should I...


    Distortion using which source(s)? Keep in mind a turntable is basically a microphone for room-born vibrations and loud sounds so it may create feedback. And a TT without an onboard Phono preamp will require connect to one in your electronics. It will be labeled explicitly "PHONO" and only a TT should use it.

    Fill in all the make and model details and how you have it connected.

    Jan 17, 2011 | Klipsch B2 Synergy Main Stereo Speaker

    1 Answer

    Trying to hook up bose 901 v to sansui 8080db is


    Just remove the Pre-Out to Main In jumpers and connect the Active Equalizer there. This way it will affect only the power output to the amp and speakers but not to any of the Tape Loops. If you need more, look around on Fixya for 901 advice and you'll find about a million posts by me for many scenarios, including multi-channel.

    Aug 04, 2010 | Bose 901 VI Main / Stereo Speaker

    1 Answer

    Recomended amplifier for tr 2800


    I've had a set of TR-2800s for about 7 years, I started with a kenwood stereo amp but graduated to a Yamaha 5.1 system in 2008, any system with 100 watts or better output on the main channels is fine, You can't blow these things without 400 or more watts.

    Aug 03, 2010 | Theater Research TR-2800 Main / Stereo...

    2 Answers

    Connect powered subwoofer


  • If your receiver has a dedicated subwoofer line level output, we recommend connecting your subwoofer to this jack. Most receivers will have just one (mono) subwoofer output, while quite a few subs require two inputs. You can use an RCA "Y" adapter cord , which is a cable with one female RCA jack at one end, and two male RCA plugs at the other. Some receivers require menu settings (such as "sub-on" or "front speakers-small") that must be made before the sub output will be active.

  • Nov 22, 2008 | Audio Players & Recorders

    Not finding what you are looking for?
    Audio Players & Recorders Logo

    Related Topics:

    55 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Audio Players & Recorders Experts

    kakima

    Level 3 Expert

    98768 Answers

     Grubhead
    Grubhead

    Level 3 Expert

    4678 Answers

    The Knight
    The Knight

    Level 3 Expert

    69718 Answers

    Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...