Hi! I have installed a TM-T88III Epson Pos Printer for my POS System. I had a PC with WinXP and it worked fine I change my machine to Win7 and now it is imposible to print to this printer. I downloaded the drivers APD_412 installed the the driver for this in USB, I have a cable from USB to Paralallel the cable works I tested with Generic and print. This install a port ESDPRT001 for the driver and bidirectional checked. When I print the test page it sends but I dont know where because it never print but I can see it in the PrintMonitor. I try to change the port for the driver and use the port VIRTUALUSB 001 for this driver but the printer status goes to Not Available and never put off. So I have to status for the printer when I install it it is OK but when I print nothing happens goes to printmonitor and it keep hereif change the port with the driver I cant print the Test Page becuase I get an error and the page never goes to PrintMonitor it is worst. I need help or any cluess to solve this. I have 10 printers and all will work with Win7. This printer cant work with Windows 7? Any cluues or whatever idea will be so appreciated. TIA Edwin Quijada
Tm-t88iii
for this driver but the printer status goes to Not Available why win7 everything is connected drivers are installed. Can any one help. Why it's not available !! Thanks. Greatly appreciated
I’m happy to help further over the phone at https://www.6ya.com/expert/itamar_19b113ec4443bd4a
Hi Edwin Quijada,
did you find a solution??I have the same problem.
thanks
Please get it here :
www.epson.co.id/epson/drivers/driver_download.htm
www.printcountry.com/drivers/EPSON_DRIVERS.asp
Jay lkg
1,128 views
Usually answered in minutes!
×