Question about Linksys Wireless-G WRT54G Router

1 Answer

Wireless router not working

Wireless router has been working. Tried to get on last night but no signal going to my computer or phone now. Wireless is not working either. Cable signal is good and I'm now hard wired into my computer.

Posted by on

  • Tim Babcock
    Tim Babcock May 11, 2010

    Does the modem work?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 144 Answers

Hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

note:

configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

if you are still having trouble configuring your device, call supportrix and use supportcall as your promo code for 1 free technical support.

Posted on Jun 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the router right by my PC, it appears connected but no signal strength at all (no bars) what is wrong?


try changing the wireless channel on the router and see if that makes any difference.

Open the setup page of the router.
Go to wireless tan and change the standard channel to 11. save the settings.

You can also try updating the drivers of the wireless adapter on your computer.
If your router is too old then you must upgrade the firmware on the router.
See how to upgrade Linksys router firmware

Mar 21, 2012 | Linksys Wireless-G Broadband Router

1 Answer

I have a Linksys E1000 wireless router. It has been working fine. The power cord it is on was unplugged briefly last night. Now when I plug it back in, all the blue lights are flashing and I can't get...


have you tryed turning off computer, router, and modem if you have one. then unplug all connections from router (phone line, ethernet net cable and power cord). Then wait 2 min then plug all back in, and turn on modem, router, then computer. We lost power yesterday for 3 hrs and I needed to actually turn in all off and unplug power cords then turn it all back on to rest and reboot them to get them working properly. Hope it helps.

Sep 25, 2011 | Cisco Linksys E1000 WirelessN Broadband...

1 Answer

Have 2 computers connected to Netgear WGT624NA router via ethernet connectors and have operated well for over a year. Now have gotten DSL and have run phone line to modem and via ethernet cable have...


Have you tried to reset router. It has to be done in order.
1. unplug router
2. unplug modem
3. shut down computer and restart after waiting 1 min
4. after restarting computer plug power back into modem and wait for all the lights to start blinking
5. after the modem is working plug power back to router and plug in the computer with ethernet cable and make sure you have internet,
6. try to link up with wireless,
If this does not work you will have to setup the router for wireless if it is att wireless you will have to call them to give you the password to set it up.

Jan 10, 2011 | NetGear WGT624 Wireless Router

1 Answer

Router stopped emitting wireless signal


You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.
Click here for step by step instructions

Jan 14, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

My router stopped working suddenly last night


Try The Reset Switch on the back...Then If that doesnt solve the problem plug it directly into a computer alone and go to your web browser and type in http://192.168.1.1 or http://192.168.2.1 It is usually your default ip of your Router and look for a reset link...if that doesnt work try a firmware upgrade from NetGears Website

Apr 03, 2009 | NetGear WGR614 Wireless Router

1 Answer

Zoom aDSL modem/wireless router seen but not connecting


Here are a couple of ideas to look at first, assuming you haven't tried them already:

1) Does moving the router help? Sometimes a new DECT phone or a microwave, or even a piece of equipment at a neighbour's house, can interfere with the signal.

2) Does changing the channel on your router help at all? If there are many other networks using the same channel, this might block your own signal.
3) If this does not make any difference, it might be worth checking your security settings.

Nov 14, 2008 | Zoom (5590-00-03) Wireless Router (G66115)

1 Answer

New belkin router not working properly


Word of advise, Belkin is terrible.... any kind of device I have gotten from them never worked properly, ether that or they have some extremely weird way on how to operate them. Yes they are cheaper but there is a reason for that. Go for a linksys router.

May 04, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

No wireless signal


The router probably went, u may need to buy a new one. Call linksys for support.

Apr 22, 2008 | Linksys WRT54GX2 Wireless-G Broadband...

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...