Question about Philips Remote Controls
I dont see my remote on there, what do i do? but its a philips universal, there is no model number expt there is a number where the battery are which is 21/06 i need the code
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.
Hope this helps :)
Posted on Jun 22, 2008
Tips for a great answer:
Mar 13, 2011 | Philips Universal PH301S Remote Control
on Dec 29, 2008 | Philips Magnavox MR-U2600 Universal...
Dec 13, 2008 | Philips Magnavox Learning Universal Remote
Jul 05, 2008 | Philips Universal PH301S Remote Control
39 people viewed this question
Usually answered in minutes!