Question about E-Machines E17T4 LCD Monitor

1 Answer

E17T4 monitor won't turn on

Have had monitor for about 18 months now. Today it just went off and won't come back on. The light on the front doesn't come on at all (yellow or blue). Tried plugging it into a different electrical outlet, and it still doesn't work. Plugged another monitor into my computer and it works fine.

Is this something that has happened to others? Could it be something as simple as a fuse or a circuit breaker inside the monitor? Is this type of problem fixable?

Thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

It could certainly be a fuse inside the monitor, although it's more likely to be an electrolytic capacitor. These kinds of repairs are possible but only by a skilled technician - with the right tools and knowledge. If your monitor is still under warranty, I recommend returning it to the manufacturer. If not, a TV or computer repair shop might be able to repair it, but it will probably be rather expensive.

The problem is probably localized in the monitor's power supply board, and a possible fix is to replace that board. If you can find another one you might be able to replace it and repair the monitor - but finding one might be difficult.

Posted on Jun 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Baby monitor Motorola mbp16 won't link


If its Bluetooth you need to put it in pairing mode by turning The device off and then turn it back on and continue holding the power button until this device power on light stays steady or is Blinking rapidly

Apr 04, 2013 | Baby Gear

1 Answer

Dell poweredge t110 server Amber error light on front panel blink one time


Had the same thing happen to me today and in my case it was a code 18 as they come...
It started while I was installing a video card adapter for a dual monitor setup. The solution - I had to simply close the side panel I had left open for testing and then reboot the server. The intrusion alarm went off.

Feb 02, 2012 | Dell PowerEdge T110 Server (GB/2GB)...

1 Answer

I have a black e machines E17T4 monitor that suddenly stopped working, the power button does nothing when it's plugged in can it be fixed?


It might be able to be fixed but typically repairs on monitors are going to cost you more than a new one would. If it's still in warranty I would contact the manufacturer unless you purchased an extended warranty.

May 03, 2011 | E-Machines E17T4 17" Flat-Panel TFT-LCD...

1 Answer

My monitor randomly turns off.


Most likely you have a bad INVERTER BOARD.

2nd in line is a burned out backlight fluorescent bulb.

Jul 02, 2009 | E-Machines E17T4 LCD Monitor

1 Answer

Acer lcd monitorX221W : 18 months old, no prior problems. Today, image suddenly went out. Upon restarting, the name ACER comes on , fades after a few seconds, then the prompt to fill in Password. The...


Sounds a lot like the backlight for it is just about dead. Nothing you've done can cause this to happen, and it certainly isn't a setting on the monitor or PC.

The backlight can be bought as a part, and replaced by a technician (or yourself if you have a rough idea what you're doing). By the time you find one, buy it, ship it, fit it... it might not be worth your time for the cost of a new 21" widescreen monitor.

You'd probably recoup some loss by selling it as faulty for parts too.

Still, be 100% sure before you do it... borrow a monitor and plug it in. I bet the borrowed monitor won't behave the same way. =-]

Aug 20, 2008 | Computers & Internet

3 Answers

Xerox 19i screen going blank


Does look like a back light or inverter problem Have you got a TV repair shop that can take a look Although your warranty may have gone you can still seek technical support on the web site,

May 27, 2007 | Xerox XA7-192i 19" LCD Monitor

Not finding what you are looking for?
E-Machines E17T4 LCD Monitor Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...