Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

1 Answer

Usb not recognized

When i insert my pen drive in usb i get a error message usb not recognized

Posted by on

  • 1 more comment 
  • Anonymous Jun 17, 2008

    i want a free software for
    SanDisk 2GB Cruzer Micro USB Flash Drive Hard Drive

  • asharlal Jun 20, 2008

    for me also message coming usb not recognized or malfunctioned,what i have to do?

  • su1ya Jun 24, 2008

    even i have the same problem my usb device is not recognized


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 172 Answers

If you use it on win 95 or win 98 or vista you need specfic drivers for you usb disk
if you get this on win xp please change the usp ports and use another port to insert the disk one of the ports has to recognise.
if the problem persists the usb port controllor on motherboards needs to be checked for faults or uninstalled drivers ,
if nothing works try a pci to usb internal card and dont forget to loaad drivers . this card has 3 to 6 ports for usb

Posted on Jun 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please insert a disk into drive E: my pen drive


hey plz help me out of my pendrive...
1)whenever i insert pendrive the error cums please insert disk it gets detect but it shows this error and i cant open

2)second problem m facing dat my pendrive is not showing me in disk management just ican change a drive letter

3)i did everything by changing drive letter also...

plzz sumone can help me out...

Aug 21, 2010 | Generic Memory USB 2.0 128MB Black Pen...

1 Answer

Pendrive problem


Try with another usb port ensure that port is enabled .

1.Go to Run and type "Devmgmt.msc" and press Enter.

2. Go to Universal Serial bus Controller. See if there are any red colored cross? If yes, right click and enable those USB Ports.


Hope this helps.

Mar 04, 2009 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

KINGSTONE 2GB pENDRIVE dID NOT WORKING


show my drive but not open it and display insert disk to drive.

Feb 02, 2009 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

PROBLEM IN PEN DRIVE


"limitation is that flash memory has a finite number of erase-write cycles. Most commercially available flash products are guaranteed to withstand around 100,000 write-erase-cycles, before the wear begins to deteriorate the integrity of the storage"
This means that your flash card may have been damaged by not removing correctly Flash card are not that reliable AS previous pen drives

Dec 11, 2008 | SanDisk 1GB Cruzer Titanium USB Flash...

1 Answer

USB 2.0 Flash Drive prblem


On first read, the error message indicates that there is a bad section of the flash memory card in your pen drive. We call these areas, sectors. A utility in Windows, called ScanDisk, which you may be familiar with can scan and then mark the sector as bad and then allow data to be written again.

However, this may be a fatal error and render the flash drive unusable. I'll have to ask you to check a few things to make a final judgement.

First, when you insert the pen drive into a usb port, does Windows recognize the drive by making the familiar tone or do you get an error message on insert?

Thanks for taking a few minutes to answer these questions. I'm afraid I will only have more until we can determine if you have a usable pen drive or not.

Just so you know, this pen drive has a lifetime warranty so it will be replaced and I can provide you with the web site address for doing that should it come to this.

Regards,
Worldvet

Oct 30, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

PEN Drive error


right click on my computer after inserting the pen drive in usb, click on manage and select disk managment from left pan, you can format your pen drive by right clicking on it

Oct 24, 2008 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

8gb trancend pen drive problem


Hello,
you can solve this problem by just formatting your pen drive with this software
http://www.transcendusa.com/products/online_recovery.asp


Oct 18, 2008 | Transcend 8GB SSD, 2.5- Inch, IDE, SLC...

1 Answer

My U3 Smart SanDisk Cruzer Micro 2.0GB USB Drive Not Recognized


We can fix it -- and recover the data (provided it is recoverable -- which it generally is). If we don't get your data back, we ship the drive back to you and you pay nothing. We've been recovering data for over 16 years and are successful about 85% of the time.

Craftsman Computer Services, Cudahy, Wisconsin

Aug 02, 2008 | SanDisk 1GB Cruzer Titanium USB Flash...

1 Answer

Not able to open Kinston 2GB Pen Drive


on desktop, right click my computer, manage, Disk management. Do you see your drive there?

Mar 23, 2008 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

SAN DISK PEN DRIVE troubleshooting


When i connect the pendrive into the USB drive the indicator light doesnt glow on pendrive and no "new hardware found" message appears on the screen.

Mar 18, 2008 | SanDisk Open Box 1GB Cruzer Mini...

Not finding what you are looking for?
SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Hard Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

Tony

Level 3 Expert

2598 Answers

Are you a SanDisk Hard Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...