Question about Philips GOGEAR SA6045 MP3 Player

1 Answer

My gogear broken

When it says philips gogear than it says iinitializing then gogear then a blank screen then it say wait for usb connection and it stays on the please tell me what to do

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

Reset the player first. If it still occurs, then go to the Philips Device Manager, and attempt both the Repair and the Update (Warning: this will delete all songs off your player). If you do not have the Philips Device Manager, rerun your installation Cd or grab the Device Manager from the Philips website.If it still fails:

Triple Reset for GoGear:
Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player.

Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Posted on Jun 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to conect to pc


Here's how you do it.
Plug in the Philips GoGear to your computer. Use a USB cable to make the connection so you can begin synchronizing your music collection.
Start Windows Media Player. Depending on how your computer is set up, this program may start automatically when you make the connection with the MP3 player

Find the Sync tab in the media player window. Click on this tab and open the Sync screen. The Sync screen has two panes. The left pane is for the music collection on your computer; the right pane is for the Philips GoGear
Choose the songs from your collection that you want to add to the GoGear's memory. Check the boxes that are presented by each song title.
Click the "Start Sync" button. The files from your computer are being copied onto your GoGear MP3 player.
Wait for the sync to complete. You can monitor the progress in the "Windows Media Player" window.
Close the media player program. Unplug your Philips GoGear from the computer.
Thanks

Jan 31, 2011 | Philips GOGEAR SA6045 MP3 Player

1 Answer

I want to get music on my mp3 player


After you sync your music collection to a Philips GoGear MP3 player with Windows Media Player, your favorite tunes will always be with you. Backing up your music collection on an MP3 player requires only a USB cable and a computer. Follow these steps to find out how easy it is.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Moderately Easy Instructions Things You'll Need:

  • Philips GoGear MP3 player
  • Computer
  1. Plug in the Philips GoGear to your computer. Use a USB cable to make the connection so you can begin synchronizing your music collection.
  2. Start Windows Media Player. Depending on how your computer is set up, this program may start automatically when you make the connection with the MP3 player.
  3. Find the Sync tab in the media player window. Click on this tab and open the Sync screen. The Sync screen has two panes. The left pane is for the music collection on your computer; the right pane is for the Philips GoGear.
  4. Choose the songs from your collection that you want to add to the GoGear's memory. Check the boxes that are presented by each song title.
  5. Click the "Start Sync" button. The files from your computer are being copied onto your GoGear MP3 player.
  6. Wait for the sync to complete. You can monitor the progress in the "Windows Media Player" window.
  7. Close the media player program. Unplug your Philips GoGear from the computer.
Hope this was helpful? Please comment for more information and thank you for using fixya

Jan 24, 2011 | Philips GOGEAR SA6045 MP3 Player

2 Answers

My Philips GoGear Opus(8GB) showed "Wait for USB Connection, Cannot find data file!" Is there any solution to it?


Philips Support Page

This worked for my Opus player supposed to work for all Opus players.
Tip: if the Device manager asks you to update first, dont, close the dialog and Choose 'Repair' tab. Follow the instructions from there.
You need to connect the player whilst holding the "+" volume key to enter the repair mode


Aug 07, 2010 | Audio Players & Recorders

2 Answers

Error message File System Error


Whenever I go to turn on my Philips Gogear audio video mp3 player, it shows the welcome screen but it doesn't go to the GoGear or the updating screens. Also, whenever I plug it into my computer through the USB cord, the charging screen doesn't show and it does not show that it is connected on 'My Computer'

Aug 20, 2009 | Philips GoGear SA3125/37 MP3 Player

2 Answers

MY PHILIPS GOGEAR STARTS UP AND FREEZES AND JUST DISPLAY A MESSEGE SAYING (WAIT FOR USB CONNECTION) CAN SOMEONE HELP ME?


I found this on page 55 of my owner's manual.
My GoGear MP3 Player was frozen, wasn't being
recognized by my computer and this worked for me.

Follow these steps exactly:

1 Reset your player first by inserting a pin or sharp
object into the reset hole at the back of the player.
2 Launch Philips Device Manager from Start > Programs >
Philips Device Manager. Select the Repair Tab.
3 While pressing the Vol + on your device, connect it
to the PC.
4 Confirm Yes when you see the screen , you can release
the Vol + now.
5 Choose your device name (SA60xx) in the box.
6 After the repair completes , click OK and continue using
your player as usual.

Jul 15, 2009 | Philips GoGear HDD1830 MP3 Player

1 Answer

My GoGear 8G wont come on


1. On you computer, ensure that Philips Device Manager is running.
2. Turn your mp3 player on (it should freeze at the Loading or GoGear Screen).
3. Plug in the mp3 player to your USB/Charger cable (ensure it is connected to the USB port on your computer), and then perform a soft reset (Power switch down and Volume up button simultaneously).
4. Let go of the other buttons as soon as the player resets. Hold the Volume down button until the player comes on. The player will be recognized by Philips Device Manager and will report a problem (and will allow you to repair it). Windows will also recognize it as a Mass Storage Device.

edit:

video: http://video.google.com/videoplay?do...56814975105076

Jan 15, 2009 | Philips GoGear SA5285/37 Digital Media...

2 Answers

Philips GoGear mp3 model: SA1300


Philips GoGear Firmware Upgrade
You need to get the latest firmware upgrade from the Philips website:
1. Go to www.philips.com/support
2. Enter your country/language
3. Enter your model # SA1333 or whatever
4. Click on the link for your exact model # (the one w/o the "B" in it)
5. Click on "Software & Drivers"
6. Download the updated "Device/Firmware Manager"
7. Once installed, open the Philips Device Manager
8. Click on the "Update" tab, then the "Update" button (with your mp3 player connected to the computer, of course)
9. Your Mp3 players firmware will update automatically
If you do not have the latest version of the Philips Device Manager installed (the latest is the version from the Philips website), then clicking the "Update" button will give you a false positive saying "The firmware on your device is already up to date."
-Tha Mp3 Doctor

Sep 03, 2008 | Philips SA5125/37 MP3 Player

1 Answer

Broken go gear


taht - your USB port is not connecting with the GoGear. With GoGear connected,
go to Start -> Control Panel --> system --> hardware --> Device Manager - and find the yellow or red exclamation mark under Universal Serial bus Controllers; right click and update driver

if that still does not work, or no yellow exclamation is present, then runa Repair in Philips Device Manager

dreaming - your GoGear will absolutely support songs from Limewire if they are in mp3 format; if the songs do not show up in Windows Media Player, there is a chance that the computer does not recognize your Gogear:

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard

Jun 15, 2008 | Philips GOGEAR SA6045 MP3 Player

Not finding what you are looking for?
Philips GOGEAR SA6045 MP3 Player Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Audio Players & Recorders Experts

Gyula Lacz

Level 3 Expert

482 Answers

kakima

Level 3 Expert

98879 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Philips Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...