Question about Dishwashers

1 Answer

Hard reset for Wash cycle too long posted by thsparky 6/10/08

Sorry, tried to send a comment but I sent you a rating instead. What is a hard reset? if you mean turning off the power for 24 hours then yes,

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Turning it for 24 hours by removing the pulg from the wall socket.

then after 24 hours try to press start(or any equivalent button to start the unit)
u must not see any kind of movement in unit since u r not connected to power.

this is done to drive off the unnecessary power from the unit that we dont need.

now you are done.

if everything goes fine you are done.

Posted on Jun 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I wash the dishes whether it is liquid or powder cascade soap the dishes come out woth a white filmy substance. What causes that?


Hi

White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle. Make sure that your soap dispenser drawer is opening and closing fine.


Hope this helps... Please post back if more information is required.

Daniel

Mar 25, 2011 | Maytag Dishwashers

1 Answer

All glasses and plates have a cloudy film remaining after wash


Hi
White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle. Make sure that your soap dispenser drawer is opening and closing fine.
Hope this helps... Please post back if more information is required.

Daniel

Feb 21, 2011 | Whirlpool Dishwashers

1 Answer

The glasses and cutlery come out with a resistant white film this is even impossible to wash off by hand


Hi
White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle. Make sure that your soap dispenser drawer is opening and closing fine.
Hope this helps... Please post back if more information is required.

Daniel

Feb 20, 2011 | Dishwashers

2 Answers

THERE IS A FILM ON THE DISHES AND RACKS AFTER THE CYCLE HAS COMPLETED.


Hi
White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle. Make sure that your soap dispenser drawer is opening and closing fine.
Hope this helps... Please post back if more information is required.

Daniel

Feb 13, 2011 | KitchenAid 24 in. KUDS01FLSS Built-In...

1 Answer

I have an hda3400go2ww, and it's leaving soap scum and food on the dishes after a wash and rinse cycle. What do I do?


Hi

White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle.
Hope this helps... Please post back if more information is required.

Daniel

Oct 25, 2010 | Hotpoint 24 in. HDA3400G Built-in...

1 Answer

White film left on dishes.


Hi


White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.

You can also add vinegar in the final rinse cycle.


Please post back if more information is required.

Daniel

Oct 19, 2010 | Dishwashers

1 Answer

Clean light is flashing


Hi

Thanks for using FixYa.
To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...


-high temp wash

-heated dry

-high temp wash

-heated dry


Please rate the solution if the issue is resolved or post a comment for further assistance.

Thanks

Rylee

Oct 07, 2010 | Whirlpool 24 in. DU1148XTP Built-in...

2 Answers

Clean cycle light is flashing


Hi


Thanks for using FixYa. If the clean light flashes, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...


-high temp wash

-heated dry
-high temp wash
-heated dry


Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 22, 2010 | Kenmore 24 in. 17482 / 17484 / 17489...

1 Answer

Dishwasher won't run


Hi


Thanks for using FixYa. If the clean light flashes 7 times, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes 7 times, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...


-high temp wash

-heated dry
-high temp wash
-heated dry


All the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cycle finish (1-2 minutes). You should now be able to run the dishwasher as normal. If the issue returns, you could have a problem with the heating circuit (i.e. element, thermostat or wiring). It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close it). Please do rate the solution if the issue is resolved or post a comment for further assistance.



Thanks
Rylee

Jun 09, 2010 | Kenmore 17024 Built-in Dishwasher

1 Answer

The "clean" light blinks


Hi


Thanks for using FixYa. If the clean light flashes, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...


-high temp wash

-heated dry
-high temp wash
-heated dry


Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 06, 2010 | Whirlpool 24 in. DU1050SS Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...