Model ir2016 e808 - Canon Office Equipment & Supplies

https://www.google.com search finds several solutions:

http://www.copytechnet.com/forums/canon/73777-canon-ir2016-e001-e808-problem.html

https://printcopy.info/?l=en&mod=erc&brand=Canon&model=iR2016&code=E808-0000

most likely fuser thermofuse, fuser not coming on, also could be a main drive but I doubt, does the fuser feel warm if not fuser not coming on...

hi.my machine ir2016 is showing system download standby

the e001 code is something is going with the fixing assembly. one of the thermistors could be going bad.

E808 is a Zero Cross error. We most commonly see power supplies or bad wall voltage cause this code.

The following information is coppied from the IR2016 Service Manual.

E808-0000 DRIVE CIRCUIT FAILURE
A zero crossing signal cannot be detected.
A fixing drive motor failure has been detected.

E808 0000 Fixing drive circuit failure

• The heater does not turn on.
• A fixing drive motor failure was detected.
• Check the connector of the fixing film unit.
• Replace the fixing film unit.
• Replace the fixing drive motor.
• Replace the DC controller PCB.
• Replace the power supply PCB.

M201 - Fixing Drive Motor - FK2-1067 - J202 on the DC controller PCB - E007, E808

Power Supply - FK2-1074

i have canon Ir2016 it give 808 error code can u help me please

Canon iR2016 / iR2016J / iR2016i / iR2020 / iR2020i Код ошибки Субкод Описание
E000 0000 Fixing temperature abnormal rise
E001 0000 Fixing unit temperature rise detection (by main thermistor)
0001 Fixing unit temperature rise detection (by sub thermistor)
E002 0000 Fixing unit temperature insufficient rise
E003 0000 Low fixing temperature detection after standby (by main thermistor)
0001 Low fixing temperature detection after standby (by sub thermistor)
E007 0000 Fixing film rotation error
E010 0000 Main motor rotation error
E019 0001 Waste toner full detection
0002 Waster toner full detection sensor failure
E052 0000 Duplex unit connection error
E100 0000 BD cycle out of range
E197 0000 Erroneous communication with printer engine
E500 0001 Finisher communication error
E520 0000 Offset error
E531 0000 Stapling error
E540 0001 Paper surface not detected (standard tray)
0002 Not moved within the specified time (standard tray)
0003 Sensor not reached within 3 seconds (standard tray)
0005 Encoder clock failure (standard tray)
E542 0001 Paper surface not detected (optional tray)
0002 Not moved within the specified time (optional tray)
0003 Sensor not reached within 3 seconds (optional tray)
0005 Encoder clock failure (optional tray)
E575 0000 Stack delivery error
E584 0000 Shutter failure
E716 0000 Erroneous communication with optional cassette
E719 0000 Erroneous communication with card reader (serial communication)
0002 Erroneous communication with coin vender (serial communication)
E733 0000 Erroneous communication between controller and printer
E736 0000 CCU communication error
E739 0000 Erroneous communication between controller and network board
E744 0001 Language file/boot ROM/USB memory error
0002
0003
0004
E805 0000 Fan failure
E808 0000 Fixing drive circuit failure

E808 0000 Fixing drive circuit failure
- The heater does not turn on.
- A fixing drive motor failure was
detected.
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the fixing drive motor.
- Replace the DC controller PCB.
- Replace the power supply PCB.

la fotocopiadora se bloqueo y no sale del error 803 es una canon 400s

hi... try to clean up your copier... usually dust accumulates inside the copier that's why paper inserted will always jam....always see to it that you copier is free from dust and other small particles that would cause your machine to get errors....