- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On the Epson website it is confirmed that the Epson WorkForce 610 will not recognize transparency media. It is just the way the printer works; if it can see through the media, it doesn't think it's there.
However.....you can tape a sheet of white paper to the non-printable side of the transparency, and it prints just fine. I put two strips of scotch tape on either side, top and bottom. Works great. It's kind of a hassle, but better than not being able to print transparencies at all!
Click on yhe following limk to see the online manual Click to open the manual. Click on the Printing. Under this title you will see about ink cartridges. Hope this will work for you. If it is helpful. give a rating. luciana44
Please follow the instructions below to ensure correct installation:
Lower the printer's output tray and open the top cover.
Connect the power cable to the printer.
And switchon the printer.
The print heads will now move to the replacement position. If they do not move to a change position press the Red ink button on the printer.
Lift up the ink cartridge clamps.
Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package.
Do not touch the green chip on the side of the cartridge. This can damage the ink cartridge.
Remove the yellow tape from the bottom of the ink cartridge.
You must remove the
yellow tape from the cartridge before installing it; otherwise, print
quality may decline or you may not be able to print.
If you have installed an ink cartridge without removing the yellow
tape, take the cartridge out of the product remove the yellow tape, and
then reinstall it.
Do not remove the transparent seal from the bottom of the cartridge
or the label on the cartridge; otherwise the cartridge may become
unusable or ink will leak.
Place the ink cartridge into the cartridge holder with the bottom down. Then push down the ink cartridge until it clicks into place.
Repeat steps 4 to 6 for each ink cartridge.
Close the ink cartridge cover and press it until it clicks into place
If you find it difficult to close the cartridge cover, make sure all the cartridges are firmly seated. Press down on each cartridge until you hear it click into place. Do not attempt to force the cover closed.
Close the printer cover and press the ink or start button to begin charging the system. Charging can take up to three minutes and is complete when the power light stops flashing.
While the ink system is charging do not switch off the printer.
You must surely have sorted this one out by now Doris! However, if you haven't, how to change print cartridges on a
DX7450 is very clearly explained in the user handbook (on the CD that
came with your printer). Insert the CD and select "Custom Install" then "Users Guide". Once its installed, double click the new Epson Icon on your screen and selct "Printing" then "Replacing Ink Cartridges". If you don't have a CD, download the User's Guide from the Epson website at http://www.epson.com - just choose your locale, then select Get Drivers and Support - Printers.