Question about ASUS P4PE Motherboard

1 Answer

Sashasantiago87@yahoo.com i have a hp d240 system board i have ami bios chip it gives me 10 beeps and then cuts off i replaced the cmos chip and i still have no clue my teacher threw me on this project and i have no clue about computers please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • ASUS Master
  • 13,433 Answers

Your problem lies deep inside the CMOS. All chips associated with the CMOS will likely have to be replaced. Your best bet is to get a new motherboard.

Posted on Jun 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3 log beeps on power on


Gigabyte doesn't list 3 long beeps as an error code, so I'm not sure if you're actually getting 3 short beeps or maybe 1 long and 2 short or... But, for reference, Gigabyte's error code list is as follows (depending on whether you have an AWARD BIOS or an AMI):

(AWARD BIOS)
1 short beep: System normal
2 short beep: CMOS Error
1 long beep and 1 short beep: Memory error
1 long beep and 2 short beep: Graphic card error
1 long beep and 3 short beep: AGP error
1 long beep and 9 short beep: Memory Error
Continuous long beep: Memory not correctly installed
Continuous short beep: Power supply unit failed

(AMI BIOS)
1 short beep: Memory Error
2 short beep: Memory parity check error.
3 short beep: Basic memory 64K address check error
4 short beep: Real Time Clock malfunction .
5 short beep: CPU error
6 short beep: Keyboard error
7 short beep: CPU interruption error
8 short beep: Graphic card error
9 short beep: Memory error
10 short beep: CMOS error
11 short beep: CPU cache memory malfunction

It might not be a lot of help, but it's somewhere to start... and at least this way you'll know what to be listening for.

Nov 30, 2013 | Gigabyte Motherboards

1 Answer

Cmos beep codes


do you know which bios your computer is running ?

AMI BIOS beep codes 1 beep - DRAM refresh failure
2 beeps - Parity Circuit Failure
3 beeps - Base 64K RAM failure
4 beeps - System Timer Failure
5 beeps - Processor Failure
6 beeps - Keyboard Controller / Gate A20 Failure
7 beeps - Virtual Mode Exception Error
8 beeps - Display Memory Read/Write Failure
9 beeps - ROM BIOS Checksum Failure
10 beeps - CMOS Shutdown Register Read/Write Error

Phoenix BIOS BEEP codes. 1-1-3 CMOS write/read failure.
1-1-4 BIOS ROM checksum error.
1-2-1 System timer failure. (Programmable Interval Timer PIT)
1-2-2 DMA (direct Memory Access) failure.
1-2-3 DMA page register failure.
1-3-1 RAM refresh failure.
1-3-3 64K RAM chip or data line failure.
1-3-4 64K RAM odd/even logic failure.
1-4-1 64K RAM address line failure.
1-4-2 64K RAM parity error.
2-?-? Any beep series starting with 2 beeps indicates a 64K RAM chip or data line error.
3-1-1 Master DMA register test.
3-1-2 Mslave DMA register failure.
3-1-3 Master interrupt mask register failure.
3-1-4 Slave interrupt mask register failure.
3-2-4 Keyboard controller failure.
3-3-4 Screen (video) memory failure.
3-4-1 Screen initialization failure.
3-4-2 Screen retrace failure.
4-2-1 Timer tick interrupt test failure.
4-2-2 Shutdown test failure.
4-2-4 Unexpected interrupt in protected mode.
4-3-1 RAM test failure above address 0FFFFh (64K +)
4-3-3 Interval timer channel 2 test failure.
4-3-4 Time of day clock failure.
4-4-1 Serial port test failure.
4-4-2 Parallel port test failure.
4-4-3 Math Co-processor failure.
BEEP codes may vary dependent upon the revision of BIOS. This list is for reference only

hope this helps

Oct 10, 2012 | Intel Mother Board S5520HCR (988889365963)...

4 Answers

Five long beeps at a range of five seconds then, repeats


Five long beeps for a modern motherboards indicates a processor failure. If you wish to remove the processor and re-seat it (reconnect it to see if it begins to work again) make sure to get some thermal compound to put between the CPU chip and the heatsink. More info at: http://www.hardwaresecrets.com/article/How-To-Correctly-Apply-Thermal-Grease/274
POST AMI BIOS beep codes
  • 1 - Memory refresh timer error
  • 2 - Parity error in base memory (first 64 KiB block)
  • 3 - Base memory read/write test error
  • 4 - Mother board timer not operational (check all PSU to MB connectors seated)
  • 5 - Processor failure
  • 6 - 8042 Gate A20 test error (cannot switch to protected mode)
  • 7 - General exception error (processor exception interrupt error)
  • 8 - Display memory error (system video adapter)
  • 9 - AMI BIOS ROM checksum error
  • 10 - CMOS shutdown register read/write error
  • 11 - Cache memory test failed
  • 12 - Mother board does not detect a RAM module (continuous beeping)
Source: Wikipedia

Feb 28, 2011 | Motherboards

1 Answer

PC power on but doesn't display anything on the monitor and has a beep code of different intervals of time. Here are the beep codes: 2 beeps, after 1 sec, 8beeps, after how many seconds 2 beeps after how...


AMI BIOS beep codes

Below are the AMI BIOS Beep codes that can occur. However, because of the wide variety of different computer manufacturers with this BIOS, the beep codes may vary.

Beep Code Descriptions Document
1 short DRAM refresh failure CH000996
2 short Parity circuit failure CH000607
3 short Base 64K RAM failure CH000996
4 short System timer failure CH000607
5 short Process failure CH000607
6 short Keyboard controller Gate A20 error CH000383
7 short Virtual mode exception error CH000607
8 short Display memory Read/Write test failure CH000607
9 short ROM BIOS checksum failure CH000607
10 short CMOS shutdown Read/Write error CH000239
11 short Cache Memory error CH000607
1 long, 3 short Conventional/Extended memory failure CH000996
1 long, 8 short Display/Retrace test failed CH000607


For more information go to: http://www.computerhope.com/beep.htm#04

Jan 09, 2011 | EliteGroup P4VXASD2 Motherboard

2 Answers

What does a AMI bios beep code of one long and 9 short


AMI BIOS beep codes Below are the AMI BIOS Beep codes that can occur. However, because of the wide variety of different computer manufacturers with this BIOS, the beep codes may vary.
Beep Code
Descriptions
1 short DRAM refresh failure 2 short Parity circuit failure 3 short Base 64K RAM failure 4 short System timer failure 5 short Process failure 6 short Keyboard controller Gate A20 error 7 short Virtual mode exception error 8 short Display memory Read/Write test failure 9 short ROM BIOS checksum failure 10 short CMOS shutdown Read/Write error 11 short Cache Memory error 1 long, 3 short Conventional/Extended memory failure 1 long, 8 short Display/Retrace test failed

Jun 01, 2010 | Asrock 939SLI32-eSATA2 (939SLIESATA2)...

1 Answer

I have a series of 10 beeps every few minutes. What does this mean?


10 Short Beeps Your problem lies deep inside the CMOS. All chips associated with the CMOS will likely have to be replaced. Your best bet is to get a new motherboard. (for AMI BIOS)

Oct 26, 2009 | ASUS M2N32-SLI Deluxe/Wireless Edition ATX...

1 Answer

First on with three beep with no display while now just on and of


you have a number of different codes.Is it 3 short beeps?or is one longer then the other?
If its 3 short ones,then try these.
the cpu could not be compatible,or needs to be replaced.
the memory chips could be bad.
Its hard to track down the problem without more information.I need to know if its an ami bios or something else.And I need to know about the beeps themselves.

Aug 28, 2009 | Motherboards

1 Answer

MOTHER BOARD


You need to have a bootable disk that has the bios for that specific motherboard on it and you need to flash it. Why dont you go to the HP website and look up the model number, it will tell you specific hardware in your system and also you can download the bios, bios updating software and you should alos find information on how to properly update the bios. Never ever restart your computer during bios update, it will f23ck it up.

Jun 10, 2008 | HP 800/PARTS/N4000 SYSTEM BOARD B VERSION...

1 Answer

Cant insall new graphics card


the graphic card is a plug and play device meaning as you install it, it is giving its resource and it starts working but you install yours and the motherboard beeps means
1. there was a change in the CMOS configuration which should not occur
2. the CMOS utility did not identify any graphic device
i think your graphic device is questionable it could not be good is the word.



UZOWUANYA
e-mail:uzowuanya@yahoo.ca

Feb 14, 2008 | ASUS Intel 810 Chipset MEW-AM Motherboard

Not finding what you are looking for?
ASUS P4PE Motherboard Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

David
David

Level 3 Expert

751 Answers

Tony

Level 3 Expert

2598 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...