Beaumark bm-dw9702-ss dishwasher error code 004??

Check with an appliance parts supplier to determine whether the Ranco unit is a specified replacement for the Beaumark. Also, it is possible that the Ranco thermostat is defective, though new.

You might have to get in contact with the company or the manufactor they should help you or look on the internet maybe that will help you.

Call the manufactor or write the company or use the internet to help you maybe.

try to go http://kitchen.manualsonline.com/manuals/mfg/beaumark/beaumark_dishwasher_product_list.html

God bless you

ask at the breadmaker manual search engine:

manualfox.com/searchengine/breadmaker.htm

hello

The "004" error code is an indication of a water temperature sensor error. There is a chance that there is a loose wire connection on the water temperature

mean while 004 error code indicates that the water temperature sensor reading is out of range (below 23 degrees F or above 217 degrees F).

however,what you need to do tp fix up the problem is to unscrew the washer then clean up all forms of dry and water you can seen in it with this the problem of the 004 error code is solve .

please make sure that all form of power supply is put OFF before you can do this

thank you and thanks for using fixya.

check the troubleshooting section in your manual. If you don´t have it anymore, you could find one asking here

shut off power to the unit first or unplug it after 1 min turn back on this may solve the problem

Error 2 = Longer Draining Time. The installation of the Drain Pipe is too high.