Question about Quintum Tenor AXT2400 (501014800) VoIP Terminal Server

1 Answer

Routing call and Billing Issue

I wanto to know how to make a routing call and billing monitoring without Softswitch software.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi Ekko,

Difficult, get a esk top pc look for a crack software VPS is very good. It cost you US1,000 for the set up.

Rene

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to change the billing informatio you have to my name and pay you


FixYa is a free service and doesn't need or have your billing information.

Please contact the company whose billing information you wish to change. If you require further assistance, add a comment to this post and name the company. FixYa can't help you change your info if you don't tell us whose.

Aug 10, 2014 | Compaq NetFlex (142042-001) Control...

1 Answer

Hi I have Panasonic KX-TDA 200 with 6 CO Lines and want to configure 3 lines for local call access and last 3 lines for International and Mobile Call access.


Do you have the programming software?
The programming can be done through the phone but it's very tedious.

If you have the programming software, its done under Automatic Route Selection (ARS).

If you don't have the programming software, you ca download one from

IF YOU ARE IN THE USA
http://uploadingit.com/file/wgznx5fimqih6e9d/Panasonic%20Unified%20PC%20Maintenance%20Console%20ver5.1%20for%20USA

OTHERS,
http://uploadingit.com/file/58xwulgmgcvsy84h/Panasonic%20Unified%20PC%20Maintenance%20Console%20Ver6.1

Feb 06, 2013 | Panasonic (KX-TDA200)

1 Answer

Problem with DID numbers not reaching the intended


Because they are routing to extension 10, that means there are not valid routes for them. How many digits is the LEC sending? MAKE SURE that they are sending what you have programmed.

Mar 19, 2010 | Avaya Partner ACS T1 Card (700241813)

1 Answer

Switch


KVM switch: This is a Keyboard video and mouse switch. It is used to connect multiple computer/servers to the same Keyboard Monitor and mouse. It is typically use in Racks housing multiple servers to swap between server without having to use a Keyboard Mouse and a Monitor per server.
SMC switch: I believe is a brand for Ethernet switches, used to connect computer together in the same LAN.

Nov 29, 2009 | SMC EZ Connect SMC2671W Wireless Network...

1 Answer

Inter-vlan routing


Unfortunately, the 5224 is a Layer 2 switch. In order to route between VLANs, you need a Layer 3 device somewhere else on your network. In other words, either a true router, or a multi-homed PC acting as a router, or a true Layer 3 switch. The 5224 is incapable of routing within itself. Sorry!!

Nov 09, 2009 | Computers & Internet

1 Answer

Hugesnet HN7000s Modem Only the power light comes on.


what seems to be the issue? i'm a hughesnet install/repair contractor

as a catch-all heres some places to start....

we'll start with the 5 lights on the front of the modem:

the top one tells you if the ethernet cable is plugged into anything.... if it's off check to make sure that cable is plugged in. if it is....replace the ethernet cable, they are cheap and available virtually everywhere from walmart to radio shack.

the next 2 lights are for transmit and recieve.... they should blink a lot but not in any particular pattern. if either of these lights is acting funny you could have cabling issue (ie: improper fitting, rust on the line, messed up groundblock, or even a severed cable), a misaligned dish, or even a blown radio (its far more common to blow out the radio than to blow out the modem...especially on those 7k systems) you might be able to correct the cable issue yourself with the right tools, but DO NOT attempt to re-align your dish....its touchy. btw i should state that if hughes catches you monkeying with your hardware they'll yank your warranty....either dont do it or dont get caught.

next light down is the "system" light. this tells you if you are connected to hughes. this light will be OFF of there is a problem with the transmit and recieve. if there is no problem with the transmit/recieve and this light is off there could be a billing problem at the other end. contact support.....you'll get a guy in india or the philipines or something that says his name is "harry" or "john" or "fred" or something american sounding. this always cracks me up.

next one down is the power light. if you have other lights on but the power light is off it indicates a broken modem...no way around it, you're gonna need a new modem.

ok, on with the trouble-shoot. if your top light is on you should be able to use your computer to look at the modem using a browser (firefox, internet explorer, safari, etc) type in 192.168.0.1 in the address bar. you should get a interface with some colored buttons across the top. the system status button should be green...any other color means trouble. the other 3 should be blue. if you cannot connect to the interface the trouble is user-end...bad ethernet cable (as mentioned before) or something beyond-the-line from the modem is messed up (router, computer, or something)

if you have any red lights you can click on them to see what's wrong. any problem areas will have red flags with error codes next to them. write these down as they are useful to diagnose what is actually wrong with the system.

if your system status button is yellow, click it....most likely you have "fapped out" (violated hughes' fair access policy) btw you can look at your signal strength too....there is no way to tell you what the signal strength should be since i dont know which bird (satellite) you're pointed at. each bird has a different acceptable signal strength.

let me know what you find and i'll see what i can do.

Mar 28, 2009 | Hughes DIRECWAY Professional Business...

1 Answer

Daisychaining subnets?


It is not recommended to daisy chain subnets because the flow of information is slowed as well as transfer of information But if done properly by using routers as well as correctly identifying the flow of information with the use of static routing then that is the correct way of daisy chaining subnets.

Nov 26, 2008 | Computers & Internet

3 Answers

Laptop cant connect wirelessly


Hey Charlie, If you re-installed your operating system you will need to get the wireless modem driver from your dell disk. For some reason they have not included the drivers in the windows software. If you can't find it then you can go on to the Dell site(obviously on another computer) and enter your service tag and get your drivers that way.

I hope this helps

Jan 17, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quintum Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98816 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Quintum Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...