Question about Coby TF-DVD7005 Portable DVD Player

1 Answer

Wrong disc my player suddenly gave me an error "wrong disc".. it was playing two hours before that happened.. i lve in the Philipines and its hard to contact a technical support representative.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Manually slide the laser (in its bed) along its track toward the center of the player. Try this a few times, restart as needed. I just got this advice from another poster and am happy not to spring for repair costs now, or another cheaply made substitute.

Posted on Jul 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY TOSHIBA DVR MODEL DR420KU WILL NOT RECORD ON DISC. IT KEEPS GIVING AN ERROR CODE AND NOW IT WILL NOT PLAYBACK DVD-R DICS, BUT IT WILL PLAY MY DVD+R DISCS. WHAT COULD BE THE SUDDEN PROBLEM?


see the cause and remedies:
Does not play disc
  1. No disc. - Load a disc into the tray.
  2. Disc has been loaded upside down. Place the disc with the label side up.
  3. Disc region code does not match region code of the player.
  4. Disc type is not the correct type to play.
  5. Disc is damaged or dirty. Clean the disc or try another.
  6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.
Finally the OPU optical pickup contain lasser beam, NOT are reading the TOC from DISK+ Syscon can be defective, you must go to the repair shop TV for fix it see the diagram attached, is a complex equipment.
God bless you
7_17_2012_11_36_12_am.gif

Jul 16, 2012 | Toshiba RS-TX20 DVD Recorder

1 Answer

My dvd player won't play dvd


likely if cannot read disc, or no disc or error, that unit has either dirty or bad optical pickup.

May 14, 2012 | DVD & Blu-Ray Players

1 Answer

Disc error: Playback feature may not be available on this disc


Ok well I have a brand new disc from the store with Percy Jackson movie on it and it will not play. The disc plays in other players in the house and other discs play in the player just not this one.

Aug 18, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

My Sony DVP-cx995v stopped playing DVD's


I had the same "Cannot play" problem - happened suddenly, I don't think I was doing anything unruly at the time.

After checking repair (exchange) prices in excess of $250 from Sony, I decided to open the cover to see if I could see anything wrong - normally a futile exercise with electronics except that in the past I have cleared errant disks that have lodged themselves near the drive/player at the rear of the library.

Upon opening and watching the library try to load and play I noticed the drive itself was not spinning the disk once loaded. It would sit for awhile, thinking about it I'm sure, then would unload and load the next dvd, again failing to spin.

I thought okay, maybe try to spin the dvd while in the player to see if it's jammed or otherwise hard to turn. It was not hard to turn and spun freely. In fact, when I put my finger through the hole at the exposed side of the player at the hub to spin the dvd, clockwise, it suddenly started to spin - and play!

I put the whole thing back together to test and all seems to be working fine at this point. Not sure what would cause the motor to stop spinning and remain in that state through poweroff/on cycles etc. but I'm sure this is not the last time I will have trouble of this kind.

I would note that when replacing the library back in its home on the shelf, be careful not to tip the library, especially toward the player area because the disks will spill out of the carousel near the player and become jammed when you power it on and attempt to load. A final tip of the library away from the player area may clear this if you hear the disks rolling out of their slots and you don't want to open the top again (it's a darned heavy box when fully loaded).

Good luck!

Jan 05, 2009 | Sony DVP-CX995V Multi-disc DVD Player

3 Answers

Disc error "playback feature may not be available on this disc"


I have a DVD and VHS player in 1 and it was working well then all of a sudden the DVD player part just stopped playing. I stick in a disk and then it would read: disk error play back feature may not be available on this disk. And this disk is fine it plays in my daughters room in her 2 in 1 player. so What can I do? The VHS player works well. Help! I dont really want to buy a new one!

Nov 30, 2008 | Sylvania SSD803 DVD Player/VCR

1 Answer

DVV Player won't play disc


Check to make sure your player can play other disks. If so then use the disk doctor to remove the scratches on your favorite disk. The area that all DVD players scan before playing a disk is probably smudged or scratched.

Nov 21, 2008 | Philips DVP3345V/17 DVD Player/VCR

2 Answers

Disc Error:


Take it back to the store if its new or if you bought a warranty and trade it for a new one. If not try calling an electronic store and ask them if they know whats wrongs with it. Be sure to read the instruction manuel for a support phone number and call there too.

Jan 14, 2008 | Emerson EWD2202 DVD Player/VCR

2 Answers

Says "wrong disc"


This problem can often be caused by the DVD player software thinking it is in a region different than your discs. (DVD discs are often encoded with 'region codes' meaning a disc purchased in Asia will not work in a player expecting to see North American discs)

What can happen is the player 'forgets' where it is, and your regioned discs won't play any longer (region free discs should continue to work as will audio CDs ....)

A power surge, random cosmic ray or similar flakiness can cause a player to 'forget' what region it was designed for ....

If that is what has happened you need to 'reset' the region code.

Altho I can diagnose this, I have NO CLUE as to how to do this with a Protron PD-800 DVD player. Anyone out there know how to reset the region codes for this (or generically for a DVD player?)

Thanks!! //cheapz

Oct 26, 2007 | Protron PD-800 DVD Player

2 Answers

Will not play any DVD


I may have bad news for you. Here's my story with the PVD4744S.

I watched over an hour of a DVD-video disc one night, no problems. The next night, I played only the intro; then the DVD player gave a message, "This type of disc cannot be played. Please insert another disc." Thereafter, I couldn't play any of several DVDs.

The manual gives little help:
http://service.us.panasonic.com/OPERMANPDF/PVD4744.PDF

My disappointment is exacerbated by the declining availability of DVD/VHS players with an RF modulator. Maybe Panasonic should create a repair kit for aging devices.

Jun 29, 2007 | Panasonic PVD4744 DVD Player/VCR

Not finding what you are looking for?
Coby TF-DVD7005 Portable DVD Player Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coby DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Are you a Coby DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...