Question about Pulsar Bracelet PXQ502 Wrist Watch

3 Answers

Pulsar (Seiko) Watch Changes Date at different time.

Hey, I accidentally changed the date between 9pm-3am prior to realizing I wasn't supposed to according to the manual. Now the date changes about 45 minutes before midnight. Can I fix this without going to the dealer, and how?
Thanks.

Posted by on

  • StealthRyder Jun 10, 2008

    I have the same problem. I did the same mistake because my watch didn't come with the proper manual and I looked it up online afterwards noticing what I did.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pulsar Master
  • 10,875 Answers

It is normal for it to change between 11pm and 1201 am,if it changes at noon,then you just need to turn the hands exactly 12 hours,thats all

Posted on Apr 09, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I purchased the Fressstyle hammer head.. recently.. i too have date change problem.. date is not changing in 12:00 PM midnight.. it changing the date in 12:00 AM noon ... Please help to resolve this problem

Posted on Apr 09, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,970 Answers

Mcdevito75 here, The manufacturer recommends you don"t try to change the date between certain hours as this could hurt the date changeing mechanism inside the watch, I don"t think you did any harm (LUCKY) and the date changeing 45 minutes before mid nite is just about right. BUT! if the date change was aliitle closer to mid nite at 1 time you can try to reset the date, here"s how, your stem should have 2 positions to change the date without haveing to cycle the watch the 24 hours 60 times. Slip a finger nail just under the crown and gently, gently lift the crown to it:s first position, it may take a little practise but you"ll get it, once you do, trun the crown and you should see the DATE change, if so set the DATE to 1 DATE before the DATE you want, now pull the stem out and set the correct gate and time of day. Your watch is now reset and date will change on time, around nid nite.

Posted on Jul 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My watch is changing date at 2 am instead of at midnight, i have tried rechanging it manually, but still each day at 2 am it changes the day again. Why it not change at 12am O'clock what I can do pls


Thread: Tag Heuer Carrera changes its date at 3:00 am instead of ...

forums.watchuseek.com > Forum > Watch Brands > TAG Heuer

Jan 1, 2012 - 6 posts - ‎3 authors
The watch used change the date, as it should, at midnight but I just noticed last night that it now waits until 3:00 am... Does anyone have any ideas. ... Join Date: Jan 2012; Posts: 2 ... Changing the date on an automatic watch - Watchuseek ...
10 posts
Mar 2, 2015
Damage of changing date at midnight on automatics ...
10 posts
Oct 18, 2013
Setting the date destroys the watch? - Watchuseek, The ...
10 posts
Sep 8, 2010
Thread: Does setting date between 9pm and 3am damage ...
10 posts
Jun 6, 2010
More results from forums.watchuseek.com

How do analog watches know to change the date at ... - Quora

https://www.quora.com/How-do-analog-watches-know-to-change-the... QuoraThere is a gear within an analog watch that is used to change the date at the appropriate time. The gear ... Watches: What is a fair price for a authentic 1970's vintage "McQueen" Rolex Explorer II? Why does the day start at midnight?

Jan 21, 2016 | Watches

1 Answer

I have a Pulsar Qartz railroad approved watch and don't know how to change day and date! Can you help me?


Hi fatmike19,

You can download the manual for your Seiko Pulsar Watch on this link. The instruction on how you will change the day and date is there.

Hope it helps.

Thank you for using Fixya.

Apr 07, 2011 | Seiko Pulsar watch

1 Answer

I have a Seiko Premier Kinetic Watch SNP005. The problem is that the date is supposed to change around midnight. Now the date changes around 9-10 in the morning. I have read the manual and the only...


Thank you for contacting FixYa.<br /> You will have to contact Seiko on this one. I would tell you to just change the date to the day before and then forward the time, but I think I would just contact them as it is such a delicate timepiece.<br /> <a href="http://www.seikowatches.com/technology/kinetic/index.html">http://www.seikowatches.com/technology/kinetic/index.html</a><br /> Best regards.

Aug 25, 2010 | Seiko Premier Kinetic® Perpetual Watch for...

1 Answer

Pulsar watch, how do you set the day of the week and month?


mcdevito75 here, The stem has 2 positions, first adjust the day or month by going thru the 24 hour cycle with the stem. once set, slip a finger nail just ubder the stem and lift carefully this should allow you to change the DATE adjust to 1 date before the date you need, now pull the stem out to adjust date and time of day turn sten the complete 24 hour cycle to achieve the correct date and time of day. Now your watches day and date are set and will change to the next day date on time, around Mid nite 1 --2 AM.

Jul 08, 2010 | Seiko Watches

1 Answer

0512037FA Wrist Watch: how do you set the date in the window of a seiko 6...


mcdevito75 here, The stem should have 2 positions to set the DATE without haveing to cycle the watch 60 times. Slip a finger nail just under the crown and gently, gently lift the crown to it's first position, it may take practice so be patient, once in it"s first position you can easily change the DATE, change it to 1 DATE before the DATE you want. NOW! push the stem back in and then pull it out to set the proper DATE and time of day, your watch is set and will change on time, around Mid Nite.

May 18, 2010 | Seiko 0512037FA Wrist Watch

2 Answers

Day/Date change


The date on mechanical and automatic watches change normally between 2-4am because this is normally when people sleep. It is not broken or in need of overhaul. It has to change sometime and that is what they have tradionally used as a time for the date to change. Also remember it is normal for an automatic or mechanical watch to loose or gain time friction is the culprit here since the gears do mesh with each other.

Fine watches like Rolex and Omega are beautiful watches but expensive to have cleaned. It should be cleaned about every 10 years or if it starts to loose a lot of time.

Incidently most agree that the Omega speedmaster manual wind (The watch that went to the Moon) is the most accurate of the bunch and is very sought after by collectors!

Apr 10, 2010 | Guess Dress Bracelet 87000L1 Watch for...

1 Answer

1990 Lady President (Datejust) with quickset date


This is normal and will not affect time keeping at all.

Jan 20, 2010 | Rolex Datejust SS

2 Answers

I've got a breitling superocean chrono and want to set the time, how do i do this?


Keep in mind that I dont have the watch in my hand... :-)

If this is an authentic Breitling...

You should have 2 buttons on the right with the crown between them. The crown screws down so you need to unscrew it before you attempt to set! Once unscrewed with gentle pressure pull the crown out. There should be 2 clicks, pull to 2nd click or furthest distance from case. That should be the time setting mode. Turn clockwise until the date changes then set your time. To change the date push back to the 1st click and that should be the date set mode. One direction will be for day and the opposite will be date. I believe that if you pull the crown back to 2nd click and push your buttons that should change the subdials for chrono. You might need to push both buttons at the same time.

Ive set Breitlings before but they arent a common watch we see. Most people dont use the Chrono so if the directions dont work for setting those then I wouldnt worry too much about it! Not many people are going to notice those. :-) Also be so very careful if its a real Breitling as they are a very expensive to fix! :-)

***DONT FORGET TO SCREW THE CROWN BACK DOWN OR YOU WILL GET WATER INSIDE THE WATCH!***

Jan 08, 2010 | Breitling Watches

2 Answers

I have breitling superocean watch.my problem is everytime i change the date the watch stops running. i have sent it back to breitling 3 times now and they say it is fixed but it stops working again. they...


you're not supposed to change the time at certain times if it is an automatic. I think any time after 8pm and before 4am (but check your manual). Apparently it messes up the mechanism. Maybe that's the issue?

Sep 06, 2008 | Watches

1 Answer

1990 Breitling Chronospace instructions


Hi snapper,

I suppose when you're setting the time on your watch, passing the midnight marker the date changes. In that case you can go to the date funcion and reset the date.
Ciao
Giulio

Mar 28, 2008 | Watches

Not finding what you are looking for?
Pulsar Bracelet PXQ502 Wrist Watch Logo

1,608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pulsar Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

freddyfox

Level 2 Expert

236 Answers

bigdawg7299

Level 3 Expert

2357 Answers

Are you a Pulsar Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...