Question about Zoom X6 (5590) DSL Modem (55900003)

1 Answer

Wep password Can't get online with my MAC. Safari and Firefox give error:SERVER NOT FOUND....trying to get to Yahoo.com....address is correct; all connections are in place and no firewall is preventing it.....went to Airport Icon at top of screen...and it says No network selected...when I select the 2wire195 I get a box that wants the WEP password....which I thought was on the bottom of the modem; however, either I don't know which one of the numbers is the correct WEP (second one in parentheses) or I'm "off" somewhere else....HELP PLEASE!!!.....Micasey

Posted by on

  • Anonymous Aug 21, 2008

    in france on holiday house has internet wi fi but asks for wep password when typed in wont recognise it.

×

1 Answer

Terd

Posted on Jul 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a wii so im trying to get this wpa code to get internet acess and i cant find it


try this trouble shooting guide. Please try the following troubleshooting: Are you using WEP or WPA security on your router? Log into the router using the default IP (consult your router's manual for assistance) Locate the "wireless security" section of your router settings and find the WEP or WPA key. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters). If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot. If you are using WPA, the Wii console is compatible with the following types: WPA - PSK (TKIP) WPA - PSK (AES) WPA2 - PSK (AES)
If your WEP or WPA key is correct, then the problem might be related to MAC address filtering: From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model). If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings). If the Mac address filter was disabled, then continue troubleshooting.

Check Nintendo's router info for special notes, if available, for your router. Click here to go to our Wireless Router lookup page. Use the drop-down box to select, if available, your router manufacturer. Click on your router's model number, if available. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings: On your PC, click "Start" and then "Run." Type "CMD" into the field that appears to open a new window. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.

Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response. if you require further assistance please let me know and i will be glad to assist you. -Midwest-tek

Aug 15, 2010 | Arris Touchstone 450a (CM450) Modem

1 Answer

It wont let me connect to wii internet


here try the trouble shooting guide. Please try the
following troubleshooting: Are you using WEP or WPA security on your router? Log into the router using the default IP (consult your router's manual for assistance) Locate the "wireless security" section of your router settings and find the WEP or WPA key. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers
or letters A through F. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers
or letters A through F. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters). If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1
slot. If you are using WPA, the Wii console is compatible with the following types: WPA - PSK (TKIP) WPA - PSK (AES) WPA2 - PSK (AES)
If your WEP or WPA key is correct, then the problem might be related to MAC address filtering: From the router settings, locate the "MAC address filter" settings (also known as "access
control", "access list", or "network filter" depending on your router model). If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the
"allowed" list. You can locate the Wii's MAC address from the "console information" page (located
under "Internet" in the Wii Settings). If the Mac address filter was disabled, then continue troubleshooting.

Check Nintendo's router info for special notes, if available, for your router. Click here to go to our Wireless Router lookup page. Use the drop-down box to select, if available, your router manufacturer. Click on your router's model number, if available. Read any "special notes" at the top of the router's page. Many issues can be solved by changing
settings described in the "special notes."

Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration
settings. To access these settings: On your PC, click "Start" and then "Run." Type "CMD" into the field that appears to open a new window. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings
asked for by the Wii console during the Manual Setup process and enter them.

Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and
plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the
router. Try to connect the Wii console online and test for proper response. if you require further assistance please let me know and i will be glad to assist you. -Midwest-tek

Aug 09, 2010 | Arris SURFboard SB4200 Modem

1 Answer

Cannot find email server att.yahoo.com ?


Under User Information, do the following:
In the Your Name box, type your full name the way that you want it to appear to other people.
In the E-mail Address box, type your e-mail user name, followed by @yahoo.com.
Under Server Information, do the following:
In the Incoming mail server (POP3) box, type pop.mail.yahoo.com.
In the Outgoing mail server (SMTP) box, type smtp.mail.yahoo.net.
Under Logon Information, do the following:
In the User Name box, type your user name. Do not include @yahoo.com.
In the Password box, type your password.
Select the Remember password check box.

Jun 21, 2010 | Modems

1 Answer

My iPhone does not connect to the Zoom X6 DSL modem. I can connect my laptop and a couple other wireless devices but not my iPhone. Is there a setting I should change either on the router or on my iPhone?...


there is 2 possibility 2 change in router first WEP or wpa security code if in your router need password for connect it then you need to find that key code to enter in iPhone.
Second if in router MAC filter is enable then you need to add your iPhone MAC address in allow list of router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.

Clickon wireless settings enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
First find the mac address of your iPhone in network setup menu then add that mac id in mac filter of router configuration menu.Then save settings and check.
Let me know if you need further assistance.
Thanks for using FixYa.

May 05, 2010 | Zoom X6 (5590) DSL Modem (55900003)

1 Answer

I cannot send mail on my MacBook Pro (Intel) using OS X's Mail program at home using my 2wire; it works at the office on Cable. What's wrong with my settings and is it software or hardware?


You may be using the wrong SMTP address for the Outgoing mail server address for your email service.

If you are not sure what your SMTP Outgoing Mail Server address is, then you can reference this link
below, to locate the Outgoing mail server address of your current email service provider

Link: POP & SMTP Email Server Addresses
---------------------------------------------------------------------
In regards to checking your mail settings in Mac OS X Mail you will need to perform these few steps:

*Launch Mail
• Click on Mail name and select Preferences from
the drop down menu.
• Now select the Account tab.
• Locate your affected email account from the side
bar and from Account Information, make sure
your Outgoing mail server address is correct.
35cc48f.jpg

I am using a .Mac account as an example,
but the same principal applies.

Now if you do find that the Outgoing mail server address for your email service is correct, then the issue may be with the SMTP server for your email service.

One way to determine SMTP functionality however, is to go online and use the web mail page for your email account and send out a test email.
---------------------------------------------------------------------
I would also recommend you make sure your Macbook Pro also has the most current version update.

Apple usually has bug fixes in each of their version updates for the Mac OS X Mail application, as well as other built in Mac OS X applications.

If you are still unable to send outgoing mail, contact your service provider to get more assistance and have them check your SMTP server address, authentication and connection with their Outgoing Mail servers.

Regards,

-Mactechtrainer

Feb 01, 2010 | 2wire (1000-000057-000) Modem

1 Answer

Can not use my wii online wireless


Make sure that you are entering your password correctly into the wii menu. If you are still havin trouble, try disable the your wirelss security to see if you can get on at all. If that then you have a Mac Address filter turn on your wirless you will have to turn it off. Once you find the mac address filter for the wii, then you can enter that into the mac address filtering and it should work.

Sep 29, 2009 | Modems

1 Answer

How do i connect my wii to the internet?


try following this wireless troubleshooting guide This error code usually indicates a problem relating to wireless security. Please try the following troubleshooting: Are you using WEP or WPA security on your router? Log into the router using the default IP (consult your router's manual for assistance) Locate the "wireless security" section of your router settings and find the WEP or WPA key. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters). If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot. If you are using WPA, the Wii console is compatible with the following types: WPA - PSK (TKIP) WPA - PSK (AES) WPA2 - PSK (AES)
If your WEP or WPA key is correct, then the problem might be related to MAC address filtering: From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model). If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings). If the Mac address filter was disabled, then continue troubleshooting.

Check Nintendo's router info for special notes, if available, for your router. Click here to go to our Wireless Router lookup page. Use the drop-down box to select, if available, your router manufacturer. Click on your router's model number, if available. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings: On your PC, click "Start" and then "Run." Type "CMD" into the field that appears to open a new window. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.

Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response. if you require further assistance please let me know and i will be glad to assist you. -Midwest-tek

Jun 30, 2009 | 2wire (1000-000057-000) Modem

1 Answer

Connecting Ipod touch 8(GB) to Wi-fi


sometimes the wifi systems only work with windows, the ipod only uses safari and thats what you see on the error. Its connected but safari cannot open it since it is not windows

Dec 13, 2008 | Modems

1 Answer

Creating a secure internet connection


You need to log into the wireless router either by a computer that successfully connects wirelessly or by physically connecting with an ethernet cable. Once connected, log into the router by open a web browser (Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari), and typing the router's address (usually 192.168.1.1 or 192.168.0.1) into the Address (or URL) line. The default usernameand password is usually "admin" & "admin" or "admin" & "password". Once successfully logged in, look for a tab or link that says "Wireless" or "Security". You'll be able to change whether security is enabled or disabled, and the password associated with it. Your security options are WEP or WPA (or WPA-PSK). WPA-PSK is the most secure, but WEP is also an acceptable choice. Select the security option of your choice and either enter text into the passphrase generator or choose your own password and type it into one of the security key text fields. If you use a password that is not a plain english combination of letters and numbers, be sure to write it down so that you can enter it as needed on other wireless devices that need to access your router (ie-pda phones, game consoles, laptops, desktops, etc). Be sure to save changes so that the security settings and password is saved.
Let me know how you make out.

Nov 29, 2008 | RCA Cable Modem DCM315R (11603540)

2 Answers

I can't get my itouch to work with my Zoom X6


Okay... Its really simple. This worked for me. Click on "Forget this Network." Then go back to "Choose Network" and manually type in the network name (with caps if necessary) and type in your WEP Password. It should give you an new IP address, as well as the Subnet Mask, Router Name, and DNS Address...

Hope this helps!

Dec 10, 2007 | Zoom X6 (5590) DSL Modem (55900003)

Not finding what you are looking for?
Zoom X6 (5590) DSL Modem (55900003) Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zoom Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Zoom Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...