Question about Maytag Neptune MAH5500B Front Load Washer

2 Answers

Washer my washer mah5500bww doesn't want to start at time . i just found out there was a recall and a lawsuit that i miss. can this washer be saves and fix at a reasonable price. can it be the circuit board.

Posted by on

  • 5 more comments 
  • mikkelsen211 Jun 27, 2008

    lights on panel will not change settings and the machine will not start on the existing setting. This has been intermittent. Tried unplugging to reset board.

  • LEANA1028 Jun 29, 2008

    MY WASHER WON'T START LIGHTS UP BUT WON'T START TRIED UNPLUGGING IT AND STILL WON'T START

  • Anonymous Jun 29, 2008

    I have the exact same problem, the lights on panel will not change settings and the machine will not start. This has been intermittent. I tried unplugging to reset board. It was an intermittend problem but it seems to be lasting longer now. What can I do? Please help

  • Anonymous Jun 29, 2008

    I have the same problem, the lights on panel will not change settings and the machine will not start. This has been intermittent but it seems to be lasting longer. Tried unplugging to reset board. Please help what can I do?

  • ortizai Jun 29, 2008

    I have the same problem, the lights on panel will not change settings and the machine will not start. This has been intermittent but it seems the problem is lasting longer. Tried unplugging to reset board. What can I do, PlEASE help.

  • Anonymous Jul 13, 2008

    i have the same problem.pls help

  • ortizai May 11, 2010

    what does mis stand for?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have changed the circuit board myself and also the wax motor for the door. these all sound like that problem. to fix if you do it is about 300.00 for parts.

Posted on Aug 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. If it mis the circuit board is this something that we cdan do ourselves?

Posted on Jun 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All four bolts broke


hope that the warranty is not run out if it has then maybe you will need to take it to the manufacturers

Jan 28, 2014 | General Electric WBVH5100HWW Front Load...

1 Answer

My cabrio washer is leaking badly


Call the whirlpool factory and tell them you are calling about a recall, they replaced my motherboard for free to keep me as a satisfied customer. Doesn't hurt to give it a try.

Jul 29, 2012 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Maytag Neptune - MAH5500BWW makes loud, loud noise during spin cycle. What parts are necessary to repair the unit? I assume there are bearings and seals needed. Thank you.


Hi,
When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front loadwashers can make..

Washer Problems Washer noise when spinning
heatman101

May 26, 2011 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag mah5500bww motor/control board failure recall


I had Maytag ship a new motor and motor control board for free and installed it myself in less than an hour. There is a ten year warranty on those parts. You just have to be very firm and insist you have warranty rights by law!

Feb 10, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Door Lock


on your model all wax motor door latch's have to be replaced,go to repair clinic .com and you can order the part or go to ebay,and put in maytag neptune mah5500bww wax motor and it will come up and the guy selling the motors has pictures on how to install,let me know-mike

Jun 25, 2008 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Neptune washer not starting


open panel at rear of control panel usning phillips head and 5/16 the board attached to that panel will probably have a burnt r14 r1 or r21 resistor. this has been an ongoing problem with this model even a class action lawsuit.(lawsuit expired 9/2005) you can change the board but this will eventually happen again maytag directs you to do a full conversion kit rebuild about $400.

Feb 17, 2008 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Maytag door wont lock and go into spin cycle


You will need to replace the door interlocking device.

Oct 26, 2007 | Maytag MAH6500 Neptune Front Loading...

Not finding what you are looking for?
Maytag Neptune MAH5500B Front Load Washer Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...