Question about U-Line Icemaker

1 Answer

U-Line Model ULN-CLR60B-00

....after cleaning mode stops and toggle switch is set back to ICE mode, nothing happens?? Not even a sound?? Is it service man time?? or can I reset it somehow?

Thanks

Posted by on

  • Sandie44 Jun 09, 2008

    My U-Line is model #ULN-CLR60B-00....after cleaning mode stops and toggle switch is set back to ICE mode, nothing happens?? Not even a sound?? However, I can toggle it back to clean and it starts that process again. Is there a reset button anywhere or do I need to call the tech out?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Call 1-800-779-2547, U-Line's tech support.

Has to be a bad a switch, wiring issue or maybe a control board. pull the service cover and see if the red light is lit on the board (or flashing). Light on (no flashing) indicates the board is powered up and no errors are occurring.

http://www.u-lineservice.com


Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seems like my icemaker overflows when filling. I have an ice build up around the plastic box. How can I adjust water


There is not an adjustment. The ice maker dump arm has a cam on it that engages the water fill switch. switch is bad or ice maker motor has a bad spot in it .

Jun 19, 2014 | U-Line Icemaker

1 Answer

Motor burnt out model uln-b195btp-11 looking for spare part


Here is the information you requested. To order, click on the add to cart button. results.gif Success, we found the genuine replacement part! Part Type Fan Motor-Refrigerator image-not-available.gif Description
FAN MOTOR FOR REFRIGERATOR
Our Part Number
Use this number to order online. Receive additional discount and free shipping
Z15-ULN-B195BTP-11-509
Price $161.01 Available Yes-In Stock Additional info FAN MOTOR FOR REFRIGERATOR
FREQUENTLY ASKED QUESTIONS-CLICK HERE


http://www.expertappliance.com/partfinder-sz.php

Hope this is the right one for you.

Jun 10, 2011 | U-Line Icemaker

1 Answer

Ice maker stopped working no power checked plug power at plug unit doesent turn on


You're going to have to find out where the power is being stopped at. So first take off the panels that you need to to see where the wires are going after the plug.The first place they go is probably a main toggle switch, test for power there. If you do have power then find out where the wires go next, if you don't, the switch is either open or broken and needs to be replaced.

Mar 13, 2010 | U-Line Icemaker

1 Answer

Icemaker not making ice


sounds like a sealed system problem.

Oct 08, 2009 | U-Line Icemaker

1 Answer

Will not dump tray...stops at 2:00 position, will not advance


Possible cause of this is. 1st the heater is out. 2nd the motor in the icemaker has a dead spot. If heater then the complete icemaker should be replaced. If motor I would replace the faceplate.Part #150 Should be around $55 for part. You can find parts by visiting u-line at www.u-line.com and under customer service you will see parts locator.

Jun 08, 2009 | U-Line Icemaker

1 Answer

Uline clr2060 produces little ice


First thing is to remove the water from the trough. Pull out the grey standpipe in the back of water trough. Then see if the grid has a good frost pattern.If the frost pattern is NOT even then you need a service call to check the sealed system. If you do have a frost pattern check to see if the water is splashing over or make sure the drain is in the bin drain hole.If water is getting in the bin then the ice can melt as fast as it makes it.Make sure your cleaning with U-line cleaner.

May 26, 2009 | U-Line Icemaker

1 Answer

U-Line sp-18 RV Ice Maker


Allow the unit to dry out for a few more days and see what happens, but it sounds like there's a shorted wire someplace in the unit. I would not put this unit into service until this is found.

www.u-lineservice.com is the mfg website for service, you can find a servicer zip code search at this site

Nov 08, 2008 | U-Line Icemaker

1 Answer

NO POWER GETTING TO UNIT


realized that there was nothing wrong with the unit....It is suposed to drain out water when running and need to jump start it...so alls good thanks for getting back to us...now were chilling.E.Bates

Jul 07, 2008 | U-Line Icemaker

Not finding what you are looking for?
U-Line Icemaker Logo

576 people viewed this question

Ask a Question

Usually answered in minutes!

Top U-Line Kitchen Appliances - Others Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Gil Shultz

Level 3 Expert

3320 Answers

Are you an U-Line Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...