Question about Gateway FPD1760 17" LCD Monitor

1 Answer

Screen wiggly problem

No, it's not. It's using analog.

Posted by on

  • Avialle Jul 07, 2008

    Sorry for the delay . . . My fiancee and I have been moving to a new home.

    No, my parents' monitor still acts up but only when it's hot and humid out. I'm thinking it may be a video card problem because recently the video card on my own PC started doing this, except for me I get verticle lines and odd squiggles as well as horizontal lines that actually interfere with the display . . . I ordered a new video card. My parents computer has an Nvidia mine has an ATI Radeon 9800. Mine is rather old which is why I opted for a new one. There's is rather low-end, but only a year and a half old. Their problem, however, isn't as severe as mine and mine happens at other occasions other than humid and hot weather. It is rather loose in the AGP slot (looser than it should be anyways) and I think it's overheating. We tried plugging a monitor we know to be working fine in and the same thing happened, so I know it's the video card for mine. I also tried updating the drivers to no avail. I haven't tried putting a different monitor on my parents' but the next time I'm there while it's happening, I will try that to see.

    Thanks for your help, however! Will write back if I discover the problem to be the video card for my parents' PC.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 68 Answers

This is now solved, no?

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen goes from digital to analog.


Unplug the analog cable from the system, and leave only the digital cable connected, and if u require to use the analog in future, then you can connect that as well

Nov 13, 2010 | Samsung SyncMaster 220WM Monitor

1 Answer

I have a VA902B Viewsonic 19 inch lcd. When I plug it in, I get narmal video, but in a few seconds, I get wiggly lines, first around the edges, then all over. I can still see the images, but its wiggly. ...


power supply on your monitor is not stable. Could be 1 of the ballast transformer of the backlight in the monitor is overheating and soon to burn out, that cause the instability of the power supply.

May 17, 2010 | ViewSonic VA902b 19" Monitor

1 Answer

After starting the computer the screen is black and only displays digital analog on screen and the blue light is flashing. It then displays a box say "check signal digital analog." please help me. Thanx.


This blue light flashing means there is power to monitor bu NO video signal. No Analog or digital Video . analog is the regular plug for PC to Monitor, the other is HDMI digital or other digital. Check signal digital/analog means again: No video signal from PC detected.

Daddy

Dec 02, 2009 | Samsung Syncmaster 940BW LCD Monitor

1 Answer

Screen stays in analog mode


analog usually means its hooked up via VGA cable
digital means its hooked up via DVI cable

Sep 04, 2009 | LG Flatron L1750S 17" LCD Monitor

2 Answers

Monitor boots ok, then "Analog" appears/monitor shuts off


Does it have a digital port being used? If you are using the DVI port, it is probably digital. Try using the menu to selct the port. If it doesn't work, not sure from here. What is the model number?

Aug 01, 2009 | E-Machines 19" Widescreen Flat Panel TFT...

1 Answer

I have a Samsung Syncmaster 2053bw. Screen


First of all plug another monitor to the VC on your PC and do the same for the SamSung"I over heat"SyncMaster2 053BW. Reply!

Jul 07, 2009 | Samsung Computer Monitors

1 Answer

Screen wiggly


Are you using the digital (DVI) input?

Jun 09, 2008 | Gateway FPD1760 17" LCD Monitor

1 Answer

Analog


Seeing the word "analog" on your screen means the monitor has recognized video input on the vga "analog" input connection.
Most computers output "analog" vga (15 pin) which must be converted to digital for a flat panel monitor to display the image.
Many LCDs now have both analog and digital inputs.

Mike

May 01, 2008 | ViewSonic VP191b 19" LCD Monitor

1 Answer

Samsung 931B SyncmMaster


DO YOU MEAN WONT SWITCH FROM ANALOG TO DIGITAL!!!

THE ONLY WAY THIS WILL CHANGE IS IF YOU HAVE A DIGITAL INPUT SOURCE CONNECTED to this mointor like HDMI AS THIS MOINTOR AUTOMATICALLY SENSES ANALOG SIGNALS AND DIGITAL INPUT SIGNALS if a digital signal is available it will switch over if a digital input singal is not available you will only be able to use the analog option

Jan 11, 2008 | Samsung SyncMaster 930B 19" LCD Flat Panel...

1 Answer

Viewsonic VA712b issuses


Digital-to-Analog Converter - DAC When referring to Audio, DAC is also short for Digital-to-Analog Converter and is the process of converting a digital signal into an audio signal.


Random Access Memory Digital-to-Analog Converter - RAMDAC Pronounced Random Access Memory Digital-to-Analog Converter, RAMDAC is the ... the digital data to an analog signal to be displayed on a computer monitor.

Good Luck, Please dont for get to Vote/Thank you.

Dec 19, 2007 | ViewSonic VA712B 17" Flat Panel LCD...

Not finding what you are looking for?
Gateway FPD1760 17" LCD Monitor Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computer Monitors Experts

olayoju victor

Level 2 Expert

191 Answers

NIK
NIK

Level 2 Expert

206 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Are you a Gateway Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...