Question about D-Link DCS-6620 Network Camera

1 Answer

Windows internet explorer version 6.0 works but not version 7

I can see the image and control the camera remotely with internet version 6 but not 7. I've updated the active x control on version 7 and I have the latest version in the 6620 version 1.03. I can control the camera but not see the image.

Suggestions.

Posted by on

1 Answer

Uninstall Microsoft Silverlight

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set up camera


http://www.fixya.com/support/t750815-veo_network_camera >The software is on the camera, all you have to do is connect it to your network and let it get an IP address, after it shows an address on the side window, use internet explorer to go to that address ( 192.168.1.***) or whatever the mask is for your network, make sure internet explorer is set to allow activex controls downloading, the browser will download the control and ask for password and user name, the default is "password" and "admin" good luck.
Note: The downloading ActiveX control will only work in Windows XP though.

Dec 30, 2011 | Veo Observer Network Camera

Tip

Drivers for Microsoft LifeCam Cinema Web camera.


Here are the drivers for microsoft livecam cinema web camera.

Drivers are available for windows XP, Vista and windows 7, Older versions of windows are not supported with this webcam.

Windows XP drivers (32bit only)
http://download.microsoft.com/download/6/6/6/6663B667-3D5E-4637-A615-80EC6BA1E4AC/LifeCam3.0.exe

windows vista drivers (32bit and 64bit)
http://download.microsoft.com/download/6/6/6/6663B667-3D5E-4637-A615-80EC6BA1E4AC/LifeCam3.0.exe

Windows 7 Drivers (32bit and 64bit)
http://download.microsoft.com/download/6/6/6/6663B667-3D5E-4637-A615-80EC6BA1E4AC/LifeCam3.0.exe

on Mar 12, 2010 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

Ok i can see the other person they can't see me i can also hear them and they can hear me though i can't be seen


1.Check that your webcam is switched on and is connected to your computer.

2.Close all programs that may be using the webcam. These include video editing software, instant messengers (such as Yahoo Messenger or Windows Live Messenger), browsers, Windows Explorer, and even some websites.

3.Make sure that both you and the person you are video calling are using the latest version of Skype, Yahoo Messenger..

4.Make sure that you have the latest version of Microsoft DirectX. For Windows Vista and Windows 7, you can get the latest version of DirectX by updating Windows with the latest service packs and updates. For Windows XP, you can download it here.

5.Check that your webcam is listed in Device Manager
Do one of the following:
Windows 7: Click the Windows button and select Control Panel.
Click Hardware and Sound and under Devices and Printers select Device Manager.
Click the little arrow beside Imaging Devices.Windows Vista: Open the Start menu and select Control Panel.
Open System and Maintenance and click Device Manager.Windows XP:Open the Start menu and select Control Panel. Open System and in the Hardware tab, click Device Manager.Under Imaging devices, check that you webcam is listed

12_9_2011_1_37_52_am.jpg

If it's not listed, reinstall the drivers for your webcam.
A driver is the program you install with the webcam which makes it work on your computer. (Some webcams use preinstalled drivers so you may not have had to install one.) Make sure you have the most recent drivers for your webcam by downloading them from the webcam manufacturer's website.

Please let me know if you need further assistance on this issue .And try to include more information in your request ...like camera model # , operating system ( windows xp ,vista ,7, etc ...) , and the software you are using to chat online ..(yahoo messenger, skype , facebook,or any other platform ...)

Dec 09, 2011 | Labtec Webcam Pro

2 Answers

When installing webcam software (Pro 9000) the setup does not recognise my IE and aborts the setup. Have IE7 working. Thanks.


Upgrade to Internet Explorer 8 and then try installing again. You can install the newer version by running windows update (browsing to update.microsoft.com with Internet Explorer). It may be an optional update, so be sure to do a "Custom" update and manually select the Internet Explorer 8 Install.

Jul 10, 2010 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

Hi there.. I have logitech webcam, but i lost the drivers. How do i know the software version? Where can i find it so i can install it..? My Camera has... M/N: V-UBC40 P/N: 861225-0000 PID: LN64287 Made in...


1. the M/N v-ubc40 is the model number
P/N 861225-0000 is the part number.
these are made in china but the Logitech site should have the updated drivers for this model.
http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=12712&section=troubleshoot&crid=480&lt_product_id=3378&tabs=1,3,2,4,5&cl=us,en&p_search_text=QuickCam%20%20Messenger#reqs
this link is to the Logitech site to get the proper drivers for Windows 7 and Windows XP
copy and paste into the address lin in your browser ( Internet Explorer) and click enter. This will bring up the page for you device.
Installation issue as per installation instruction for Windows 7 or Windows XP:
  • If Windows Installer 3.1 (KB893803) is not installed on the system running Windows XP, the software will do so before continuing installation.
  • Installation is only possible when installing with administrative privileges.

Mar 11, 2010 | Logitech QuickCam Express Web Camera

1 Answer

My computer recognize the cam but nothing comes up on my screen?


When the new device pops up, it should tell you if it installed the device and if the device is working. If it did, the it should be listed in Windows Explorer similar to a disk drive. If it is there and you click on it the the right side of Windows Explorer should display the camera view.
If there is no camera in Windows Explorer, then go to control panel and see if you can find it there. Depending on your Windows, look under Imaging Devices, Devices and Printers Camera & Scanners.... If there is no listing for it, the driver did not install. Locate the driver for the camera and install it.

Jun 01, 2009 | Veo Advanced Connect Webcam

1 Answer

Can't view image using Internet Explorer 7 with Window Vista Business.


Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next "Calling and Devices" on the right, set the Microphone and Speakers to the computer Audio Card or headphones/mike.
Next go to the Test Audio section below where you just setup the microphone & speaker and (written in blue) click on "Open the call setup assistant"
and the "Yahoo Call Setup Assistant" window will open to the left and follow the the instructions. Click on FINISH and the audio will be setup.
Next go to "Webcam" and click in the circle "Allways allow the following people to view my webcam.
Next Click on "Super Webcam" snd in the circle click "Start Super Webcam mode automatically".
Then click OK and it should work.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

May 28, 2009 | Levelone WCS-2010 Network Camera

5 Answers

Veo network camera


The software is on the camera, all you have to do is connect it to your network and let it get an IP address, after it shows an address on the side window, use internet explorer to go to that address ( 192.168.1.XXX) or whatever the mask is for your network, make sure internet explorer is set to allow activex controls downloading, the browser will download the control and ask for password and user name, the default is "password" and "admin" good luck

Jul 07, 2008 | Veo Observer Network Camera

1 Answer

Can't view image using Internet Explorer 7 with Window Vista Business.


Once IP camera setup complete access can be done with any browser regardless of operating system. So even if its on Vista, XP or Linux it will be accessible. For example if Camera IP has been set as 192.168.0.33, You need to type http://192.168.0.33 in your browser (IE 7 will work).
If you dont have user manual you can get from the link below
ftp://download.level1.info/manual/WCS-2010(EN).pdf

If you need further assistance please post your question
Good Luck

Jan 31, 2008 | Levelone WCS-2010 Network Camera

2 Answers

Veo Observer network camera


Make sure that you are using Internet Explorer 5.0 or higher. If you are experiencing problems, try upgrading to the latest version of Microsoft's Internet Explorer from the Microsoft webpage at: http://www.microsoft.com/windows/ie Method A: 1) Go to C:\Program Files\Veo Observer Studio and delete the files: xrlknc.dll and xrlkncd.dll. 2) After the files have been deleted, try using the Veo Observer Studio again. --or-- Method B: 1) Uninstall the Veo Observer Studio from your computer. 2) Download the latest version of the Veo Observer Studio from our webpage at: http://www.veo.com/Observer/firmware.asp if it still has the same promblem refer to your display or the grafix recommendations

Oct 15, 2006 | Veo Observer Network Camera

Not finding what you are looking for?
D-Link DCS-6620 Network Camera Logo

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Geoff

Level 3 Expert

413 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you a D-Link Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...