Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

My new printer

If you are copying something it is fine with some lines but from computer of reading a memory card it is printing with lines and extremely light. It has new ink and i have cleaned the printer head. I would like to know what to do,.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Greatings

what you need to do in this case I will suggest a calibration!, a printhead cleaning and try to make a firmware if that doest work let me know!

Regards

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Memory card error


view & print button is used for viewing the content in the memory card if it is inserted in your printer. If you are giving job from computer and it is not getting printed try the following steps.

1. check the cable between computer and printer.
2. check the printer queue ( see a printer icon on the right bottom of the screen near time). if it is there double click and check whether any document is pending in the queue. if so cancel all pending job and restart the computer and try printing again.

Oct 10, 2013 | HP Photosmart D7160 InkJet Printer

1 Answer

Black line on copy and fax functions


Clean the paper path for the scan/fax portion. The original goes in and as the document is "read" a spot of dirt is causing the black line down the page because it is picked up in the copy area.

Dec 16, 2011 | Dell 948 All-In-One InkJet Printer

1 Answer

Our printer will not recognize our memory card. We are inserting it in #3 slot. This card was used in a Cannon EOS 60D camera. It will pull up cards from another camera.


Try reading the card with another device such as a computer card reader, also make sure there isn't some sort of lock switch on the card. If the card will not read in another device it is probably faulty and needs to be replaced.

May 11, 2011 | Lexmark X8350 Print, Scan, Copy and Fax...

1 Answer

Can't change copy mode on printer back to print? seems stuck in copy. Keeps print a page telling me it's not aligned. Has all these lines I'm sopposed to scan for best quality etc.


Hi,
i understand that you are facing some problem with your printer. Please follow the below steps to resolve your issue:

1. Turn off your printer and disconnect all the possible removable parts from your printer like cables, memory cards (if any) cartridges, etc
2. Fix them all back to position again properly.
3. Uninstall all the software and drivers related your printer from your computer and use the driver cd which came along with your device to reinstall back. connect your device to computer when prompted to do so while installing the driver.
4. If your buttons on the printer seems to got struck within, then try to pull them out carefully and don't make that to struck again inside until you give the printer to service for next time.
5. Please click the below link to read to the basic manual which guides you about the device operation.
http://h10032.www1.hp.com/ctg/Manual/c01416716.pdf

6. whenever you connect a new cartridge or reconnect the existing cartridge then you may be prompted to align the print cartrdges. If prompted, you may be asked to take a printout. Read the instructions shown and provide proper reply to it by seeing to the printed pages ( normally colour and lines will be printed) as this will align your print cartridges and will produce quality prints from next time onwards.

i hope this solves your issue and let me know your comments.
Thanks

Jul 27, 2010 | HP PhotoSmart C4480 All-in-One Printer ...

1 Answer

Printer wont read SD cards does read sony memory


If it does not seat (fit) properly, why say the printer will not read SD cards? It certainly will read SD cards that are supported. You can still upload to computer and print from there as you suggested.

Dec 27, 2009 | Canon PIXMA iP6700D InkJet Photo Printer

2 Answers

How do you transfer photos from memory card inserted in HP C5280 printer to my computer?


You cannot read that memory card inserted in HP printer to your Computer because that HP Card Reader port is only for direct access printing from memory card.

All you have to do is use a Multi-memory card reader into the PC where connected to USB port.

I'm sure 100 works!
Good luck!

Oct 09, 2009 | HP Photosmart C5280 InkJet Printer

1 Answer

HP Photosmart C3180 prints a solid black line left side of paper ONLY when you COPY. When you print from computer, it prints just fine. It is only from COPY mode that the solid black line appears.Already...


Unfortunately, your C3180 printer needs some repairs done to it or you . A section of the printing arm that does the printing is faulty. This happened to me and apart from replacing the arm (at considerable cost) I purchased a new printer at a much cheaper cost. You can use your faulty printer for printing from the computer but not for copying or scanning. MG

Jun 08, 2009 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

Why am I having trouble with my Epson Stylus Photo Printer R320 reading the new SD card that I recently purchased. Printer says that card cannot be used with this printer. ?? Is my printer now obsolete?...


At the time your printer was manufactured, it incorporates/uses what technology is available.

Things to consider, memory cards now comes in different capacity and speed. Your printer's memory card reader can't read cards that uses newer technology.

You can however use your computer's card reader if there is one or purchase a USB memory card reader to download the photos and print them from the computer.

This actually how I print photos since I can do a lot more before sending it to the printer. I use Picasa (free) for quick photo fix and effects.

Nov 10, 2008 | Printers & Copiers

1 Answer

Canon MP730 Pritner


nope..sounds like a communications issue...maybe a new cable?

http://tinyurl.com/6qcpgy

Jul 27, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

2 Answers

Printer isn'treading card


According to Lexmark's website, the printer will not read a memory card larger than 256MB. They specifically mentioned xD cards, but not cover the other types of cards. I have a 512MB SD card, and had the same problem, so I would guess it can't read anything over 256.

Aug 07, 2007 | Lexmark P315 InkJet Photo Printer

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...