Question about JVC AV-48WP30 48" Rear Projection Television

2 Answers

What is the correct part number?

I have a jvc (AV48WP30) the colors are messed up and i have read about upgrading the hybrid ic's . What is the correct part number to replace with. I have STK 392-110 on the board now.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

The question is old, but this might still help someone.

I had to replace mine on the 55" model, and I went with the STK 392-150's. The cause of failure is normally overheating, and with mine they did a lousy job of applying thermal paste to the backs of the ICs. (as you can see in the pic, so I'm sure that is why they failed). Depending on where you buy them, you can probably find the 150s or 180s online for the same or lower price anyway, so go with the higher power rating since that means they will likely withstand more heat for longer. But make sure you buy a good thermal paste and apply it evenly and correctly. Mine is working great now going on 3 months, I used Tuniq TX-4 paste. BTW, I'm a lousy solderer but I removed the old and soldered-on the new chips by hand. It looked pretty rough but ended up working perfectly. Anyone can do it!
What is the correct part number? - correct-part-number-rzft2a41ymvcc0z5ypedp1yk-1-1.jpg

Posted on Oct 18, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The recommendation of the manufacturer is to replace the ICs with the same part number. In this case, use hte STK 392-110. Some people "upgrade" to the STK 302-150 because it can handle more power. The added power handling will not significantly increase the time of the set at all. This is your call. Either IC will work as the pin-out is the same for both.

I'd use the original part number.
Dan

Posted on Jun 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Double faces with red 'halo' around people...after TV 'popped' and went off then back on.


Replace the convergence ICs and resistors. You can get the JVC repair kit called the AV48WP30 - AV65wp30 convergence repair kit from www.tvrepairworld.com which contains the ICs, Resistors, and the CD with repair instructions.

May 25, 2011 | JVC AV-56WP30 56" Rear Projection...

1 Answer

The tv is blurry it seems the colors are not lining up.


Thats a common problem caused by failed convergence ICs. You can get the AV48WP30 -AV65WP30 convergence repair kit from www.tvrepairworld.com the kit contains the ICs, Resistors and the CD with step by step instructions for the repair.

Aug 15, 2010 | JVC AV-56WP30 56" Rear Projection...

1 Answer

The picture is not clear-the colors do not line up-they are not aliened


Convergence failure is causing that. You can get the AV48WP30 Convergence repair kit from www.tvrepairworld.com the kit contains the IC's Resistors and the CD with step by step repair instructions.

Aug 15, 2010 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Model# AV48WP30 Picture show double vision. Colors cant be adjus


you need to replace the convergence ICs and associated resistors you can get the repair kit at the following link for your model which contains the two ICs and all the feed resistors plus step by step instructions with detailed photos how to do the repair. Heres the link to the kit for your model.
http://servicemanuals.vstore.ca/product_info.php/pName/av48wp30-convergence-repair-kit/cName/convergence-repair-kits

Mar 05, 2009 | JVC AV-48WP30 48" Rear Projection...

1 Answer

I have a jvc av48wp30 tv and need a wire diagram


Looking the convergence board from the side of the resistors (The chips will be behind the resistors), you have from de left to right:

1.5 ohms, 150ohms, 220ohms, 2.2ohms, 3.3 ohms, 220ohms, 1.8ohms, 220ohms, 150ohms, 150ohms, 1.5ohms, and dispose horizontal in relation of the other resistors (the one near to the Ic is 2.2ohms and the other is 220ohms).

Hope this helps...

Feb 02, 2009 | JVC AV-48WP74 48" Rear Projection...

1 Answer

JVC AV48WP30 convergence ic


I'm in the process of trying to replace both convergence IC's in my JVC also. I was able to buy both IC's (they look like black semi-rectangular components with 20 pins sticking out...like a computer chip only much bigger) at a TV repair shop for about $15 each. They were clearly labed STK392-110 (but could be 150 or 180 if you wanted to upgrade).

Jan 18, 2009 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Jvc av48wp30


Send them an email and mention that slinteriors asked them to give you a complimentary copy of the IC instructions, and they will . The head techs email is servicemanuals13@gmail.com

May 24, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

I have a JVC av48wp30 tv with a convergence problem. I have read about changing the 2 stk392-110 ICs. Do I also need to change the resistor? Also, where can I get the schematics and instructions on how...


Go to this link they have replacement Convergence ICs and they provide free instalation instructions with pictures plus free on line tech support so you can do the repairs yourself.

May 01, 2008 | Televison & Video

1 Answer

JVC AV48WP30 Rear Projection TV


There are a number of different STK type parts. You need to look on the old ones for the part numbers. May have to dissassemble the heatsink to see the number. STK is pretty good about its numbers and you should have no trouble finding them.
partstore,com
mcminone.com
nteinc.com

Dec 31, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
JVC AV-48WP30 48" Rear Projection Television Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71705 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...