An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: INSIDE MESSAGE ON GREETING CARD
Your card will fold to make an inside and outside once folded, but is seen in a page layout app differently. Take a sheet of paper and fold it in half to represent the card you will be making. Now open it up and lay it down on a table, with the inside of the card face down. The outside back of the card should now be on your left, and the front of the card is on the right. Use a pencil or pen to mark it as such, if you need to. Now when you do your card layout, the cover art and text should be on the right side of the page you create in the application. If you flip the card over, so that the inside is now facing you, you are looking at the inside of the card. Usually, the text and signature areas would be on the right side of this page, as well. Now, use that same guidance when you work on 'page 2' of your document. Add the text to the right side of your page, so it will be on the right inside panel after you print and fold the card. The final step is to print it out so that the inside and outside are in the correct orientation to each other. Be sure to feed the paper such that the top of the card is facing the same side of the paper tray when you prnt both sides. (I sometimes make a light mark in pencil which can be erasd, to be sure it goes in the right direction, since this step is easily messed up.) Good luck. DigiChick
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
what this simply is that your panasonic phone has been over power by power supply what you are to do first of all put off the phone for some time then put it on again after it most has relax it self then apply the below instruction to reprogram the greeting message on your panasonic phone again
Panasonic telephones come with a built-in answering machines. You can
leave the telephone as is and let your callers hear a message
pre-recorded on the device by Panasonic, or you can personalize your
phone with your own greeting.
Press "Getting Rec" on the base unit.
Press "Getting Rec" again within 10 seconds after you hear the pre-recorded message, "To record greeting, press record again."
Lean in so you are within eight inches of the microphone on the unit, and wait for the long beep.
Record a personal greeting lasting up to two minutes after you hear the beep.
Press "Rec Greeting" or "Stop" after you have finished recording your greeting.
Record your greeting again if the base unit displays an "E" and beeps six times in a row.
Press "Greeting Check" to hear the greeting you recorded.
Recording a Personal Greeting Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: “Hello, no one is available to take your call. Please leave a message after the tone.” You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.
Press /mute. The system announces the number of new and old messages, then starts to play themessages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that thesystem is in the command waiting mode.
Press 8 to start the recording. The system announces, “Record greeting.” Begin recording after the announcement.
When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recordedgreeting plays back for you.
Selecting a Greeting Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can also switch back and forth between the pre-recorded greeting and your own greeting at any time.
Press the /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.
click start click run and type regedit after the registry program opens click edit click find type the program name e.g greeting cards click find delete every file that you found in the registry that belongs to the greeting cards program after you delete close the registry program and restart the windows. and then try to reinstall the new program..