Question about Vtech 5.8 Ghz Handset Cordless Phone System with Digital Answering & Caller ID

2 Answers

No connection The answering macine works as the base functions Ok but all the handsets just say connecting... and stay that way. The system was installed 3 months ago and worked till a few days ago.

Posted by on

  • Anonymous Apr 23, 2009

    my phones say connecting all the time no dial tone in three rooms except for one roon only. I have to go to that room to pick up the phone to answer or make calls

  • Anonymous May 05, 2009

    connection problem on all receivers

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I recently changed my service to Vonage and had the problem of the 2 handsets v-tech 6772 model registering only as "searching....." and neither the vtech or the instruction manual gave info on how to deal with this problem.
Eventually what I did was unplug the power source from the main base phone for about a minute, then reconnected it. The two handsets immediately synchronized and the problem was resolved.

Posted on Feb 12, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,224 Answers

Deregister headsets and then run register again

Posted on Jun 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have charged the base and the two hand sets for 48 hrs. This is a new unit. No dial tone/communication to any unit.


1st-check the intercom function of the units. No intercom recheck the battery connections ,look for a clear tape on them & remove. Recharge batteries.2nd- Intercom OK. Check base connection to wall phone jack. Interconnect phone cable may be bad. Good luck. Have a nice day.

Jan 11, 2016 | Uniden DECT 1480-3 Black Cordless Phone w/...

1 Answer

I have a vtech cordless answering system ( CS6829 ) I CAN'T GET A DIALTONE. WHAT DO I NEED TO DO?


Check the phone line is connected to the correct socket in the base unit firstly, then if that's ok, if you have another corded phone handy, plug that in and check the incoming phone line. If that's not got a dial tone the line is broken.
If that's all ok, is the volume on the handset turned up? Does it have a signal in range of the base unit? Is the handset paired to the base station also?

Nov 05, 2014 | Phones

1 Answer

System error #1 Panasonic kxtg2770


spacer.gif spacer.gif
1)On handset, press MENU, 0, 0, 1.
Handset display shows as follows.

ts_hsinset_locator.gif

*Skip this step when handset already shows as above.

2) On base unit, press LOCATOR for 3 sec until CHARGE LED flashes.

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Panasonic Services Company Customer Servicenter
Suite B 4900 George McVay Drive
McAllen, TX 7850


spacer.gif
spacer.gif
1)On handset, press MENU, 0, 0, 1.
Handset display shows as follows.

ts_hsinset_locator.gif

*Skip this step when handset already shows as above.

2) On base unit, press LOCATOR for 3 sec until CHARGE LED flashes.

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Panasonic Services Company Customer Servicenter
Suite B 4900 George McVay Drive
McAllen, TX 7850


spacer.gif
spacer.gif
1) Press FUNCTION on handset. Then, using the Navigator key, press Down (V) 4 times, Right (>) 1 time, Down (V) 7 times, Right (>) 2 times.
Handset display shows as follows.

ts_hsinset_mute.gif

*Skip this step when handset already shows as above.

2) On base unit, press MUTE. (MUTE LED flashes.)

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Dec 04, 2010 | Panasonic KX-TG2770 Phone System w/...

3 Answers

It said base no power


Remove then replace the batteries from the hand set. You should now get dial tojo.

Oct 25, 2010 | Panasonic KX-TGA101S Cordless Handset

1 Answer

No dial tone. Base will ring. Handset has no


Check the Battery on the Handset. remove the pwr frm the base unit n connect aft 30 sec. aft this if it still says the same msg, then the handset needs to be replaced.


Mar 03, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

Handset can not connect to base unit ATT E-2126


AT&T 2.4 cordlessE2126 handset will not reset to base

Apr 01, 2009 | AT&T E2126 2.4 GHz Cordless Phone

1 Answer

Base doesn't recgonize handset


ya use pensil erser on the connections ok to keep real clean

Feb 03, 2008 | Uniden TRU9480 Cordless Telephone

1 Answer

Handset not working after dropping phone


open the phone the transistors mit have got damaged..it wont charge u much...

Nov 24, 2007 | Panasonic KX-TG2632PK 2.4 GHz FHSS...

Not finding what you are looking for?
Vtech 5.8 Ghz Handset Cordless Phone System with Digital Answering & Caller ID Logo

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Phones Experts

kakima

Level 3 Expert

96467 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Vtech Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...