Question about Packard Bell PC Desktops

1 Answer

Packard bell restore new Hdu

Replaced hdu. restarting with restore cds. getting glue list error

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

From parkard bell suppport website Quote

"Step 4 - Re-installing your software
Call the help desk and ask them to guide you through the
ExtHS process.
Please have your Recovery CDs to hand when you call
the Easy Repair line.

Once you have completed the ExtHS process you will
need to re-install Windows and the other software supplied
with your Packard Bell computer. To do this follow the
steps below:
1. Disconnect all peripheral devices (web cam, printer,
scanner, broadband modem etc.).
2. Insert the Packard Bell Master CD 1 / DVD in the top
CD / DVD drive and restart your computer.
3. The CD will load and display the following message:
Please refer to the section headed Packard Bell
Recovery Program in your user’s guide for instructions
on this utility. Press OK if you want to continue
or Cancel to return to DOS.
4. Press the letter O on your keyboard to continue.
5. You will see a menu with options. Please select option 1
“Standard System Restore”
by pressing the 1 key on
your keyboard.
6. A warning message about data loss will be displayed.
Press the letter O to continue.
7. The process will take around 40 minutes. Once this is
done you will need to restart your PC. Remove the CDs
and store them in a safe place.
8. If there was a Software Library DVD supplied with your
PC you can use this to install the extra software that was
supplied with your computer. Insert this into the drive
and follow the onscreen instructions.
9. Finally, you will need to install any additional devices
(web cam, printer, etc.) and software by following the
instructions supplied with them."


Posted on Jun 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot find a new restoring point for my paker bell computer


The restore points in windows are generated automatically, in order to restore your computer to a previous date a valid restore point would need to already exist. You cannot manually assign a restore date.

Nov 13, 2012 | Packard Bell PC Desktops

1 Answer

I have a Packard Bell Imedia desktop not sure of the model. It was working fine until recently, I switched on my pc and after the boot screen "NTLDR is missing Alt Ctrl Del" message appeared....


Remove the hard disk and attach it to an USB hard drive adapter and then connect it into the USB port of a working computer. This computer will detect the hard drive as an external storage device, then you can open the various folders and files to copy your files to this computer or burn your data to a CD/DVD disc or USB flash drive.
Return you hard disk back to your Packard Bell so you can reinstall Windows.

Aug 10, 2011 | Packard Bell iMedia 6826 (P481000502) PC...

1 Answer

I have a Packard Bell iMedia SL 9553, The odyssey Boot Floppy has been lost, Any Way I could get a copy to restore the computer using the Master Discs I have?


YES YOU WOULD BE ABLE TO Call packard bell and show them proof of purchaase and get them sent out to you now packard bell was bought out by hewit packard and there number is or you could go to this website and get any driver you would need http://list.driverguide.com/list/company788/

Jan 14, 2011 | Packard Bell iMedia SL 9553 (P660401806)...

2 Answers

Disk drive not working


If you are not facing any other issues other than playing the CDs, I would suggest you to go for an External Drive and get this issue resolved. In case you are facing many other issues and the computer you are using is not a Pentium 4 or equivalent, I would advice you to go for a new computer with better configuration.

Oct 05, 2009 | Packard Bell PC Desktops

2 Answers

Packard bell registration message


There is a solution for this problem, but you have to be very computer orentated to correct it. First look in the programs listing under startup and see if there is a link there for the PacBell auto start when the computer tarts each time it is turned on. If there is a link there right click on it and delete the shortcut from the startup menu. restart the computer and see if it is still there. if so go back and look in the startup menu selection and see if it has reappeared. If it has then you will have to shut off the windows auto recovery option so it will not replace the missing file when the computer is restarted. Now if this does not work, you will have to get someone that is familiar with the registry files. You do not want to go probing around in there or you may just shut down tour computer permanently. A professional will have to go in and search for the file entry that controls the option and then delete the corresponding registry entries. Regards, rcampsr

Sep 28, 2008 | Packard Bell iMedia 6826 (P481000502) PC...

1 Answer

Glue parts error


Please, let us know if this response was helpful for you or, of course, if you have more questions, etc on this topic.

Thank you
BJ

Apr 02, 2008 | PC Desktops

2 Answers

Factory setting on Packard Bell Easy Note F5275 (Model MIT-TIT_N)


Hi go to this site and follow the prompts, you will find the software you need there.
http://h10025.www1.hp.com/ewfrf/wc/siteHome
Regards mistyman

Dec 18, 2007 | Packard Bell iMedia SL 9553 (P660401806)...

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a Packard Bell PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...