Question about Linksys Wireless-G Broadband Router

2 Answers

Wireless internet I have a lynxus wireless internet, just got a new computer that is trying to log into the network, and it needs the password, which i do not have. is there a way to get that password?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Try Username (admin) Password (admin) without the () symbols. If not, unplug power for 30 seconds, then plugin and take a toothpic and press the reset button on the back of the router for 30 seconds (Small hole tooth pic size). This will set everything back to default. Good Luck Hope this was helpful. Let me know if this was helpful, and if I can be further service to you. Jimmyriggs

Posted on Jun 09, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

These Linksys (pronounced "link-sis") routers can be reset and then reconfigured. Inserting the end of a paper clip or pen tip into the small hole marked "Reset" on the back of the router will delete all settings and allow you to re-configure your network. There are other ways to "sniff" for the password, but this enters a gray area which is covered by many other hacking websites.
Alternately, if you have had a Geek Squad Agent set up your internet, you can call 1-800-GEEKSQUAD (800-433-5778) and ask them to look up your records for the password. You should also contact this number to schedule an appointment if you need file and printer-sharing enabled or need help re-establishing your network.
Linksys also has support on their website or by phone.

Posted on Jun 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help tech support on ASUS wireless router WL-520gC...please


1. Hardwired your computer to the router.2. Go to Command Prompt and type ipconfig.
3. Get the Ethernet adapter Local Area Network Default Gateway.
4. Open Internet Explorer and type the Default Gateway. Type admin for username and password.
5. Click Wireless Tab and change the wireless password.

Mar 01, 2013 | ASUS Wireless Router WL-520gc 125HSM...

Tip

Set up a computer-to-computer (ad hoc) network


An ad hoc network is a temporary connection between computers and devices used for a specific purpose, such as sharing documents during a meeting or playing multiple-player computer games. You can also temporarily share an Internet connection with other people on your ad hoc network, so those people don’t have to set up their own Internet connections. Ad hoc networks can only be wireless, so you must have a wireless network adapter installed in your computer to set up or join an ad hoc network.

Click to open Connect to a Network.

Click Set up a connection or network.

Click Set up an ad hoc (computer-to-computer) network, click Next, and then follow the steps in the wizard.

Notes
If one or more of the networked computers is joined to a domain, you need to have a user account on that computer to see and access shared items on it.

If the networked computers are not joined to a domain, but you want to require people to have a user account on your computer for access to shared items, turn on password protected sharing in Network and Sharing Center.

To turn on password protected sharing
Click to open Network and Sharing Center.

Under Sharing and Discovery, if password protected sharing is off, click the arrow button to expand the section, click Turn on password protected sharing, and then click Apply. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

An ad hoc network is automatically deleted after all users disconnect from the network or when the person who set up the network disconnects and goes out of range of the other users of the network, unless you choose to make it a permanent network when you create it.

If you share your Internet connection, Internet connection sharing (ICS) will be disabled if you disconnect from the ad hoc network, you create a new ad hoc network without disconnecting from the old ad hoc network for which you enabled ICS, or you log off and then log back on (without disconnecting from the ad hoc network).

If you set up an ad hoc network and share your Internet connection, and then someone logs on to the same computer by using Fast User Switching, the Internet connection will still be shared, even if you didn't intend to share it with that person.

I hope you all found this information useful and helpful.

Phillip

on Jul 31, 2010 | Computers & Internet

1 Answer

Wifi works and all but keeps having my two phones put the password in every half and hour. I don't have the disc for it so can't really set it up just connected it to my charter modem.


Try this please:
  1. eHow
  2. Internet
  3. Wireless Internet & Network Hardware
  4. Netgear Wireless Routers
  5. How to Access Netgear Wireless Router Settings
X Must See: Slide Shows
How to Access Netgear Wireless Router Settings Xno-user-image.gif Ryan Bauer

Ryan Bauer is a freelance writer located in Ozark, Missouri. He has written numerous articles and books, including "How to Improve Your Credit Score 100 Points in 100 Days." Bauer is an experienced automotive mechanic and computer technician.
By Ryan Bauer, eHow Contributor , last updated February 24, 2012

72955587_xs.jpg Wireless routers connect computers to a network without the need for network cables.

Wireless routers are used to connect computers into a network without running network cables throughout your home or office. Netgear wireless router settings must be changed using the router's Web-based interface. Any computer that is "hard wired" with a network cable to the router, rather than on a wireless connection, can be used to access the router. From the Settings menu, options such as "Encryptionicon1.png," "Network setup details" and "Passwords" can be customized.

Other People Are Reading

Instructions
    • 1

      On a computer that is connected to the routericon1.png with a network cable, open any Web browser, such as Internet Explorer or Mozilla Firefox. In the address bar, type "192.168.0.1" (without the quotes) and press "Enter." This will bring up the login prompt for most Netgear wireless routers. If that doesn't work, try "www.routerlogin.net", "192.168.0.5", or "10.1.10.1" until the login window appears.

    • 2

      Type "admin" in the Username field, type "password" in the Password field and click "OK." If the password fails, try "1234," "Password" with a capital "P" or "admin". Once you enter the proper credentials, the settings screen will open.

    • 3

      Make any required changes to the settings. Under Security section, it is possible to specify a new username and password for added security. Once you have saved your changes, close the window, and the system will automatically log you out.



Read more: How to Access Netgear Wireless Router Settings ' eHow.com http://www.ehow.com/how_4913660_access-netgear-wireless-router-settings.html#ixzz2H3QQJGxn

Jan 04, 2013 | Computers & Internet

1 Answer

WIRELESS GATEWAY


How to View or Change Your Wireless Network Password


Symptoms:


You have lost or forgotten the password to your wireless network
You have lost or forgotten the password for the router, access point or other network device
You left the default password or used a weak password and someone has hijacked your network



Depending on the router, you can either view or reset the wireless network password (also referred to as the passphrase or security key) if you can log into the router. Some routers mask the wireless network password, so while you cannot recover it, you can enter and save a new password.


If you cannot log into your router because you have forgotten the router password or your network has been hijacked, please refer to "Lost or forgotten password for router or other device" below.


To view or reset a wireless network password:


Launch your Internet browser and type http://www.routerlogin.net in or http://192.168.1.1 or http://192.168.0.1 the address field for your browser. Enter the router's username and password.
The default username is admin, the default password is password.
From the left-hand navigation menu of the Router administration interface, select Set Up > Wireless Settings
Note: On some routers this option will be under BASIC > Wireless.
From the center screen, you find the current wireless security settings under the Security Options heading.


If the wireless network passphrase is visible, review it and use it to log devices onto your network.
If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.


Read more about Securing your Wireless Network.
If you cannot log into your router:


- If you were routed to the NETGEAR website or getting the "Page cannot be displayed" message when trying to login to router, make sure you are connected to the NETGEAR router. Check your wired connection and make sure cable is securely plugged in and LED is on. If wireless adapter is on, make sure you are NOT connected on a different wireless network.


- Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default access information to reconfigure your router settings. NOTE: Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!


See the following articles for more information:


Secure Your Wireless Network: WPA/WPA2 (Recommended)
Reset and Restore a NETGEAR device to Factory Default Settings
Default Password for NETGEAR devices

Jul 19, 2012 | Gateway Computers & Internet

1 Answer

Setting password, lock


Connect the computer to the router with the Ethernet cable.
Open Internet browser and in the address bar type 192.168.1.1.
Log in to the router.
Go to router settings.
Change the wireless network name SSID.
Change the security mode to WPA. Enter the password. Save the settings.
Try to connect to the new network.

Read more about Wireless network security

Jun 22, 2012 | Linksys Wireless-G WRT54G Router

1 Answer

How do I add a password?


the password for 2wire if you got it from your ISP is most likely on the bottum of the unit on a sticker

Jul 28, 2010 | 2wire (1000-400108-001) Router

1 Answer

Macbook and wireless n setup how do you set it up????!!!!!


Can you clarify the problem for me:

1. Mac Type = Macbook
2. Operating System = Mac OS ?
3. What are you trying to connect to?

For example are you trying to set up a Wireless Home network, meaning that iPhones, iPods or other macs can share the one Internet Connection. This is called a Computer-to-Computer Network.

OR are you trying to configure a Wireless Modem to work with your MacBook?

Setting up a Computer-to-Computer Network is done by:

1. Select System Preferences from the Apple Menu.
2. Select Network from the Internet & Wireless section.
3. Select Airport from the list of devices.
4. Click the Turn Airport On button, located next to Status. NOTE: If it is already turned on then this button will read Turn Airport Off.
5. Select Create Network from the drop down menu adjacent Network Name.
6. Type in the preferred name that you wish to call your network in the Name field. (ie., MacBookHomeNetwork or something)
7. Select the Channel (Channel 11) is an OK one to select.
8. Choose whether you want the user to type in a password to gain access to your network. (This is recommended.) If you do, then click the check box beside Require Password.
8.1 Type in the Password into the Password field.
8.2 Type the Password again into the Verify field.
8.3 Select the type of encryption you want to use, 40bit or 128bit.
9. Click the Show Airport status in Menu Bar check box.

NOTE: If you require advanced settings, then click the Advanced ... button.

10. Apply and then go back to the System Preferences window (using the Left Arrow located top/left of window). If you get stuck, get back using Instruction No.1 above.)
11. Click the Sharing Icon in the Internet & Wireless section.
12. Select from the list each item you wish to share (i.e, File, Printer, Bluetooth, Internet, DVD or CD etc...).

NOW : From your other device, you need to locate the new Wireless Network Connection.

If it is an iPhone or iPod then go to the Settings menu and select Wi-Fi from the list. The new network should be picked up automatically. Log in to it (if you set up passwords).

I hope this helps. Regards,

Feb 05, 2010 | Computers & Internet

1 Answer

Wireless Internet stopped working. Can't reconnect.


If restarting the router and restarting computer did not work (unplug both power cables), then you need to log into the router and check network settings.

To log into router type the router IP on internet explore bar, then enter user id and password.
You find details on how to do this, IP and passwords listed on the owner manual.

If wireless security settings on router are fine, then you can reset router to factory default using the pinhole switch. You will need to enter all your broadband settings to have the router working afterward.


Apr 27, 2009 | 2wire 2700HG-B Router (2700HGB)

3 Answers

Need a network key


Since you want to access the router setup page and get the wireelss security for your laptop you can try this:
Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is admin. Click the Ok button to log in to your router.
When you're already on the setup page of the router youc an go to Wireless tab and click on Wireless security and there you can find the security key that you need....

If the default password didn't work you need to reset the router by pressing the reset button for 15 seconds so it will be back to its default settings with default password which is admin.

But if you successfully log in to the router page just go to the Wireless tab and there you can find all the wireless settings of your router including the wireless security key...

Nov 28, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Connection/setup problem


You are not trying to log onto another network. Your router should connect you to your ISP and the internet, through the modem you are using. If you have a laptop enabled with wireless internet card and you are trying to log onto the network supported by your new router, you can click on the network icon on you computer and get it to scan for available networks. Once you see the network you just created with your new router, you enter the SSID, password and IP address you used in setting up the router. Hope this helps

Jul 24, 2007 | D-Link AirPlus Xtreme G DI-624 Wireless...

Not finding what you are looking for?
Linksys Wireless-G Broadband Router Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...