Question about Radio Communications

10 Answers

My Motorola H700 Will Not Pair

I have successfully paired my H700 with my Motorola "Pocket PC" Cell phone several times. However, after working for a while, the "pairing" seems to be lost, because the cell phone is not transferring the call to the hands-free device.

SO - as a "fix," I have deleted the device "H700" in bluetooth setup mode on my Pocket PC a few times, then redetected and reinstalled the bluetooth device. This always requires a password, which by default according to Motorola is "0000." This four-digit number has always worked in the past.

NOW, however, on my latest attempt to install, the Pocket PC will not take "0000." And the pairing attempt fails. Motorola's 1-800 number automated system said to try "1234," so I did - no dice.

I have tried rebooting my Pocket PC several times - no change. I don't know how to reset the H700 other than to turn it off and on, which I have - repeatedly. The H700 is on steady purple light, which means that it is supposed to be in "pairing mode," and the Pocket PC detects it, but the pairing procedure fails at the stage where the passcode is entered.

HELP!

Dennis W. Montoya
Rio Rancho,. New Mexico

Posted by on

  • aryes25 Jun 24, 2008

    My H700 was paired fine with my phone and then one day it just stop working. I deleted the earpiece and attempted to pair it again and nothing seems to work. The passcode "0000" isn't working and neither is "1234" I don't know what else to do. This is my 4th H700.

  • real_g_u-not Jul 05, 2008

    i forgot my passcode

×

10 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem and I keep trying and trying 1234, 0000 and other numbers I can think of. It was frustrating. I was ready to throw my device away and buy a new one. Then I tried something that I have not and it worked. All I needed to do is to press the big button in the center of the H700 until it turns purple steadily. And then I pulled out the microphone of the H700. The button remained purple. Then I typed the password 0000 into my cellphone. The button will flicker indicating it's finally communicating and then it finally did!. Try that. Hopefully it works for you too. It worked with mine.

Posted on Jul 03, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem and i have a T-mobile MDA and I keep trying and trying 1234, 0000 and other numbers I can think of. It was frustrating. I was ready to throw my device away and buy a new one. Then I tried something that I have not and it worked. All I needed to do is to press the big button in the center of the H700 until it turns purple steadily. And then I pulled out the microphone of the H700. The button remained purple. Then I typed the password 0000 into my cellphone. The button will flicker indicating it's finally communicating and then it finally did!. Try that. Hopefully it works for you too. It worked with mi

Posted on Dec 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a sony ericsson W580i that I have been connecting with my motorola S9 for a few months. All of a sudden I started noticing the same problem to where it will not connect. After trying everything else, as a last resort I removed the battery and the SIM card, waited a minute and put it back on. WORKED LIKE A CHARM
Hope it helps

Posted on Sep 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have had a similar problem which was resolved by plugging the fully charged headset back into the charger for a few seconds and then unplugging. This seems to have reset something in the headset and then it paired.

Posted on Aug 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Pressing the botton then pulling out the headset did the trick.

Posted on Aug 03, 2008

I plugged my motorola h385 into the charger and it shows purple. i put in 0000 and it didnt work. but i unplugged the charger and then did 0000 again and it connected! so try it

Posted on Oct 07, 2008

After working well for a year, my Motorola H350 stopped working. The phone seemed to think it had a connection, but it refused to transfer calls to the H350. I re-paired the phone and H350 with 0000, but no dice. Then I read captianbob's post "I have had a similar problem which was resolved by plugging the fully charged headset back into the charger for a few seconds and then unplugging. This seems to have reset something in the headset and then it paired."

This worked!

Posted on Aug 28, 2008

The above advice is absolutely correct. The light should show you purple and steady. Then you need to enter password "0000". This will connect you to the handset device.

Posted on Jul 06, 2008

The above adice is absolutely correct. The light should show purple and steady. When it is like that then enter the password "0000". Then it should connect you to handset device.

Posted on Jul 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hey whats up out there if your talking about the h700 please just try to pair hold the button when light turns purple steady pull out peace u talk through and watch the screen start to do things u havnt saw it do in the last hour u were sitting there putting in 0000,1234.0000,1234,8888,9999 lol enjoy your head set hope it helped u yah diggg big mike

Posted on Jul 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to use my H700 after charging ?


If tv is bluetooth capable, look under menus and pair with H700.
Phones if initially paired will simply need to have bluetooth 'active' (as by default it is usually off). - If not pair - you will need to go through menus under 'settings' to pair with the H700 (also at this point indicate that the H700 is 'trusted device').

Nov 25, 2014 | Motorola Mobility H700 Wireless Headset

4 Answers

Passcode


The Motorola H700 has Bluetooth v1.2 which is backward compatible with v1.1. The headset works with both Hands-free and Headset profiles and is easy to pair with devices running various operating systems and software. We tested the headset with the Motorola SLVR, Palm Treo 650, the Nokia 9500, the Cingular 8125 and the Cingular 2125, and the headset paired with all devices with ease. To pair the Motorola, turn off the headset first then hold the Call button until the LED ring turns purple, quickly open the boom so that the LED stays solid purple, the headset is now in pairing mode. Use your mobile phone to discover and pair with the headset using “0000” as the default pass code. Call handling between the phone and the headset transferred smoothly and the headset will play notification or a ring tone when a call comes in. When working with the Treo 650, the H700 has an uncomfortably long delay in notifying an incoming call. It starts to ring after the Treo 650 has already ringed 2-3 times. The connection between the phone and the headset is solid. When we paired the Treo 650 to both the Motorola H700 and the Parrot 322 car kit, we can pick up calls on either one and the Motorola H700 worked reliably in this set up.

Hope I helped Dr Reed


Apr 06, 2010 | Motorola Mobility H700 Wireless Headset

1 Answer

I have a blackberry storm and im trying to pair my bluetooth h700 with it. it found the headset but it keeps saying connection successful the 2 seconds later itll say connection terminated. all my...


Hold down the connect button on headset until steady purple light comes on, then open the boom.

Search for Bluetooth devices on the phone. When asked for a pin, use "0000". Now the H700 will show up in the Bluetooth device list, but it will not connect. Put the headset in pairing mode again, this time go to the h700 listed on the phone and select connect. Now the devices will work as normal. When you open the boom on the h700, it will connect to the phone.

Jan 18, 2009 | Motorola Mobility H700 Wireless Headset

1 Answer

H700 wont connect to lg rumor


after pair successful highlight the headset and hit connect

Jan 07, 2009 | Motorola Mobility H700 Wireless Headset

1 Answer

Motorola H700 won't pair with LG CU720 phone


You will need to enter pairing mode on your device. The H700 User Manual indicates that you do so by first turning off any previously paired device and opening the headset BOOM. The indicator light should light a steady purple while in pairing mode.

You may not need to turn off your phone if you do not desire this, you may be able to get by turning the blue tooth function off and on, on your phone and attempt to pair again.

Pairing Pin is likely 0000.

Dec 29, 2008 | Motorola Mobility H700 Wireless Headset

9 Answers

Is H700 compatible with the iPhone?


Here is a straightforward procedure to "pair" the Motorola H700 bluetooth headset with an iphone

1. Turn off the headset by folding the microphone.
2. On your iphone, go to settings-->General-->Bluetooth-->tap tp turn ON
3. To activate your headset, hold down the center button and keep it pressed while you fold out the microphone.

The iphone will immediately detect the device and state "not paiired"
Ignore this message and go ahead and tap on the headset menu displayed on th eipjone screen. You will e prompted fot a security code. Please enter 0000. The iphone will confirm that the devices have een paired successfully.
You arer done! To verify, try placing a call from the iphone and you will see a new menu on iphone asking you to choose the headset H700 or speaker phone.
Step 3 is the most important step in getting the two devices to talk.

Apr 23, 2008 | Motorola Mobility H700 Wireless Headset

1 Answer

Pairing h700 to sanyo s1


After your phone has found the H700 you have to tell your phone to pair with it. It will then ask for the code. Punch in 0000 and confirm. After a little bit the H700 will flash blue several times rapidly and then start blinking about every 5 or 6 seconds. It is then paired with your phone.

Apr 21, 2008 | Motorola Mobility H700 Wireless Headset

2 Answers

Motorola H700 Problems with BB Pearl 8100


Steps to pair a H700 headset with any bleutooth pone:

  1. Make sure the H700 fully chared (very important)!!
  2. Make sure the microphone boom is folded closed, i.e. power is off!
  3. Hold the call button for 1-5 seconds until the light is steady lit purple
  4. Flip out the microphone boom, the light should stay lit purple!

Now you are ready to pair the headset with your phone, so follow the pairing instructions of your phone.

Note: When prompted for the Passkey; it is most likely 0000 but the correct Passkey should be on the headset accessory instructions.

I must add that indeed my headset on occation (once or twice every three months) also loses its connection with the blackberry (a 8703e) . At which time I have to remove the headset from my phone bluetooth device list, and start the above described steps to pair my headset with the phone again.

Jun 02, 2007 | Motorola Mobility H700 Wireless Headset

8 Answers

Motorola H700 pairing


It's important to note that the pin has to be entered while the light is still violet. On the phone, begin searching for bluetooth devices. With the boom closed, hold the center button until the light turns violet, then immediately flip the boom open. The phone should immediately find your H700. However, to pair successfully, you must enter the pin (0000) while the light is still violet. If the light goes off, close the boom, enter 0000, and while the phone says processing, hold the center button until the light turns violet and flip the boom open. The light on your H700 will turn blue, then flash rapidly, and your phone should say that it has paired successfully.

Apr 30, 2007 | Motorola Mobility H700 Wireless Headset

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

4,002 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1640 Answers

Brad Brown

Level 3 Expert

13732 Answers

Mike Charette

Level 3 Expert

1769 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...