I have misplace my owners manual and I need to clean my B/I oven. Whirlpool Model#Gbs277pdq1 Serial #XJ1401020

Whirlpool uses the same manual for many of their ranges. The Self-Clean Cycle is marked with an asterix because it is only available on some ranges using that manual. Looking at the support page for the WFC150M0EB0, there is a good close-up picture of the control panel for the range. There is no Self-Clean touch pad button on the left hand side of the control panel. Thus your range doesn't include the feature. The Self-Clean would be in line between the Bake/Broil buttons and Control Lock button.

Whirlpool has the documentation and images for the WFC150M0EB ranges on the product page: https://www.whirlpool.com/kitchen/cooking/ranges/single-oven-freestanding/p.4.8-cu.-ft.-freestanding-counter-depth-electric-range.wfc150m0eb.html . The direct link to the owner's manual is https://www.whirlpool.com/content/dam/global/documents/201406/owners-manual-W10719733-RevA.pdf .

I wish that I had better news for you.

Cindy Wells

The model is GGE350LWS00; the self-clean cycle selection is a bit different for this Whirlpool double oven range. Make sure that the oven isn't above 400F before starting the self-clean cycle. Close both oven doors. Press Precise Clean for the appropriate oven; only one oven can be cleaned at a time. For the upper oven, the button is next to the Toast button. The lower oven's Precise Clean is directly below the one for the upper oven. (If the oven doors are open, you will see Door. If the doors are not closed within thirty seconds, the Self-clean will be canceled.) Then press Presets (to the right of the zero button in the number pad) to select the type/ length of the cleaning cycle. You only need to press this once if the default Medium cleaning cycle is appropriate. Press Presets additional times if you need to cycle through to the Heavy or Light cleaning options. The cleaning cycle should start 4 seconds after you last press Presets. If the door locks do not properly engage, the self-clean cycle will be canceled. If the lock mechanism is broken or not getting the message from the control board, you may need check the lock, the wiring or control board to determine the source of the issue. See https://www.searspartsdirect.com/model-number/gge350lws00/1198/0124111.html .

The manual is available at Sears Parts Direct here: https://www.searspartsdirect.com/partsdirect/user-manuals/gge350lws00-whirlpool-parts-manual . The direct link to the manual is currently https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/L0909156.pdf . See page 17.

I hope this helps.

Cindy Wells

Whirpool Self Cleaning Oven Instructions Hunker


Please provide us the model number if you can.

Hello, Diane -

Are you asking about the Whirlpool model WFC150m0ew? I do not find information on any model with the number WFC150moewo.

If you mean the Whirlpool model WFC150m0ew and you do not have the owner's manual to read about the self-cleaning settings, I have located the owner's manual for that model on the Whirlpool website.

See:
https://www.whirlpool.com/results.html?term=WFC150M0EW&showTab=modelContent

Look for the 2 links to download the Use & Care guide. The self-cleaning instructions are on Page 11 of version of the Use & Care guide - whichever one you choose to download and save.

By the way, when you download and then save the Use & Care guide, so you can print it for easy reference, be sure to give the file a name you can find easily in your Documents folder - something like: Whirlpool Oven Manual.

Best wishes.

Most Whirlpool model numbers start with two or three letters and have another two letters later in the number. W10198615D may be your serial number or a Lowe's product number, not the Whirlpool model number.

Usually though the model number and serial number aren't on the back of the stove. The plaque with this data is on the rim of the oven behind the warming or storage drawer.

The manuals that are available are here: https://www.whirlpool.com/webapp/wcs/stores/servlet/OCManualsLiteratureSearchView?catalogId=10561&langId=-1&storeId=10211&krypto=5QgxQhneFliXuEuX564wSQ%3D%3D&ddkey=http:OCManualsLiteratureSearchView .

Please recheck your model number and post a comment with the correct model number. I'll be glad to try to get the correct manual for you.

I wish that I could be of more help right now.

Cindy Wells

First remove the racks, broiler pan (complete) and any aluminum foil that is in the oven. Hand clean any large deposits inside the oven. Use a non-abrasive cleanser, not an oven cleaner. Clean around the door frame and the edge of the door (outside of the gasket) with hot water and detergent. Close the door to the oven and make sure there are no plastic utensils near the vent of the oven. Make sure that your kitchen is well ventilated.

Next move the lock lever to the right. Set the Oven Selector and Oven Temperature both to Clean. Make sure that the clock, Start and Stop times are set to the correct time. Then push in and turn the Stop time knob clockwise to 3 hours (normal cycle). Make sure the Start time knob is not pushed in. Now wait for the cleaning cycle to be completed and for the oven to cool down. The lock lever can not be moved back to the left until the oven is cool. Forcing it will break it. Turn the Oven Selector and the Oven Temperature knobs to Off.

The manual is available here: http://www.kitchenaid.ca/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%203189075.pdf . If the direct link doesn't work, start here: http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=WHRCOM and enter the model number and then click Go.

I hope this helps.

Cindy Wells

after cleaning the oven the bake temp would not go any higher than 350. when you press the temp button to go lower or higher it only go down. could you tell me what is wrong or what to do.

hi there,

go to www.whirlpool.com

then scroll down to the bottom right and you'll see customer support and then manuals & literature.

click on that and then type in your model #.

all the manuals are in .pdf, so make sure that you have Acrobat Reader.

I dont know how old yours is but there was a recall on whirlpool wall ovens due to the dor not closing enough and when in the clean cycle too much hot air was getting into the control panel and causing a thermal fuse to blow causing the oven to not operate. There is also a non resetable fuse in the back that will cause no operation of the oven. So if you did not have the shim kit installed along with a new seal you should call whirlpool and have your model and serial number off the unit to give them and the will tell you if yours needs the updated fix. If it needs it the repair should be of no cost to you.