Question about NetGear WIRELESS-G WGR614 802.11G WIRELESS ROUTER ($20.00 M.I.RebateTill 06/30/2004) (NETWGR614)

1 Answer

Other people are on my computer

How do i enable it so they cant get on pwaters1@tampabay.rr.com
thank you iwent in setting it still says unsecure but theirs say secure

Posted by on

  • Anonymous Jun 09, 2008

    turn on security

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Just enable router security, go in to the web based user interface by typing http://192.168.0.1 A little box may pop up prompting you for a user name and password, if you havent set one of your own try user: admin and password: admin OR user: admin password:password. This opens your settings...

Next, hide your SSID, which isnt much protection against experienced hackers but for this instance should do just fine. Then Click the "Wireless Settings" link on the left side of the page under "Basic Settings". Choose WPA-PSK under "Security Options". WEP is easily hackable DO NOT USE as encryption type unless your OS doesnt support it. I can hack WEP in ten minutes so be aware this is not really a secure option.

Enter an 8-63 character passphrase in the passphrase box and apply. If yopu only have a few home computers, you can al;ways filter by MAC address whcih basically prevents any compouter that hasnt had thier MAC entering into the router manually from connecting.

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C:\Users\Nelson>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Dragonlorde Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP...


It does not show as connected. Connect the ISP modem to main uplink port. Then connect pc to any other port. Done! Test it with network cable to pc before trying a wireless device.

Default IP is 192.168.1.1 Use web browser to access. User: Admin Password: password.




There is reset option in the back. Hold it in till it cycles. This will clear all custom settings.



http://www.netgear.com/images/WNR3500Lv2_DS_07Jun1118-5898.pdf


Nov 08, 2012 | NetGear WNR3500L100NAS Rangemax WirelessN...

1 Answer

My dlink router reset itself and now it is unsecure


You need to enable WEP security on router. Connect router to 1 computer with lan cable then you can access it with below default ip in internet explorer. 192.168.1.1 or 192.168.0.1 or 192.168.2.1 then you can see user and password screen type user as "admin" and password as "admin" or blank or "password" or "1234" then go to wireless ->wireless security enable WEP and enter password save settings and restart router. Then it ask for password to connect wireless. Let me know if you need further assistance. Thanks for using FixYa.

Jun 14, 2011 | D-Link DIR-615 Wireless Router

1 Answer

Have this router. Was using default unsecured on my my daughters and my wifes computers. Mine is windows xp daughters and wifes are windows 7. christmas day we were all on line. I secured my computer and...


You can reset everything by pressing the reset button found in a recess small hole next to the power connecter. Use a straighten paper clip or tooth pick in the hole and gently press the switch for about ten seconds. this will set everything to the default stage. Then you can access the router the normal way.

Dec 27, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Cant get my wireless router to go wireless followed cd manual when i take the lead out to go wireless i get no conection iwent step by step twice and nothing???help please thanks wie=reless g router model...


You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

Click here for step by step instructions

Aug 14, 2010 | Belkin (F5D7633UK4A) Wireless Router

1 Answer

Vista attempts to connect with the router "unsecured network"


Hi Friend,

If the security is enabled on your computer then on router the security has to be enabled.

Please follow the steps:

1.Open the router page (192.168.0.1)
2.Enter the username and password
3.ClickWireless settings and fill the section as mention

Name(SSID)-As per your choice
Region-As per your location
Channel-6
Mode-Auto

Security options
WEP

Security Encryption
Authentication-Automatic
Encryption strength-64bit

Security Encryption key
Key1-type a 10 digit password

Click Apply. Turn off the router for 30 seconds and turn it on again.

I hope this will resolve the issue.

Regards
Chiranjeet

May 22, 2010 | NetGear WGT624 Wireless Router

1 Answer

Is unable to connect


Type 192.168.1.1 into your browser and then enter user "admin" for both the username and password. Go to Wireless/Wireless Security and enable the setting so it is unsecure. Now your computer will see the signal and allow you to connect


http://uk.answers.yahoo.com/question/index?qid=20070912140643AAIqBrz

http://en.kioskea.net/forum/affich-27219-unable-to-connect-to-my-linksys-wi-fi-router

http://www.computing.net/answers/windows-xp/unable-to-connect-through-router/136768.html

Apr 12, 2010 | Routers

1 Answer

Laptop will not connect to my router and different router with a weaker signal is being detected


just update your router and installed the latest firmware in the router then you try it you got it

May 20, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Unsecure wireless connection...


The other computers could still have old settings from before....maybe try running ipconfig /renew on the ones that don't work and run ipconfig /flushdns then see if wireless can do a search for the newly named one.

Apr 02, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Wireless connection of netgear wireless router for compaq laptop


Sometimes firewalls on your computers can cause connection issues. I had the same problem with my home network. I had norton internet security 2008 on both systems, but the firewall settings on both computers had to be adjusted to allow the computers to talk. If you have different brand firewalls on each computer, you should consider to switching one of the computers so that it matches the other.

Another thing you want to do is log into the router's web utility and check to see if the wireless settings are blocking wireless connections in some way. You also want to make sure the ssid broadcast is enabled.

Finally, you really should consider using security on your router, so wireless connections would be password protected. I suggest wpa personal.

May 03, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
NetGear WIRELESS-G WGR614 802.11G WIRELESS ROUTER ($20.00 M.I.RebateTill 06/30/2004) (NETWGR614) Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...