Question about RCA Projection Televisions

1 Answer

Screen displays unusable signal - RCA Projection Televisions

Posted by on

  • speakingfree Jun 08, 2008

    I get the same prompt for both 1 and 2 video inputs. Unusable signal.

  • speakingfree Jun 08, 2008

    not working with other cables.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 13,433 Answers

First thing is to check the cables - it may also be a hardware issue in the signal input area if other inputs work flawlessly.

Posted on Jun 08, 2008

  • Ekse Jun 08, 2008

    this may also be a wrong setting.



    you should find that DVD still pumps out signal on more than one output so you should try connecting say by AV or S-video or whatever is available on the back of the DVD and TV to be used at least temporarily for menu adjustment



    and change the video setup

  • Ekse Jun 08, 2008

    Do you still get sound?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a model av48p776 jvc I am getting jitter lines across the screen more often than not and the bright comes and goes what do I need to do to fix it I would hate to get rid of the TV I just bought it


JVC AV48P776 Jitter and Brightness Varies

Check for convergence failure. Convergence Gallery Try adjusting convergence in user menu. If convergence display is messed up or adjustments do not work correctly, you have an Intermittent short circuit within an STK IC.

Look at menu screen with an unused input (antenna or video). If menu is stable and clear, TV may be OK and you may have a signal input problem.

If it is not poor quality input signal or convergence problem, someone has to troubleshoot to determine if it is a Video, Processing, Power supply or CRT related problem.

Most likely convergence.

easyab

Feb 28, 2010 | JVC AV48P777 Television

1 Answer

Unuseable signal


WHAT HAPPENS WHEN YOU USE A DVD INPUT (AV) OR A SAT/CABLE BOX CONNECTED TO THE AV INPUT'S ,,IF IT CLEARS UP YOU HAVE A SIGNAL BOARD BAD BUUUUUUT YOU CAN BYPASS THAT BOARD AND SAVE MONEY JUST BY USING THE AV INPUT...TUNICA

Sep 25, 2008 | RCA P52926 52" Rear Projection Television

3 Answers

RCS Scenium


What is your TV input connection? Are you using Antenna? Cable? Dish?

The Unusable Signal sounds like the TV is not getting a signal. Does your TV have a built in HD Tuner?

If you are using Antenna you might want to try setting up the connections and it should search for quality channels that you get good signal strength. If you are on channel 2 and there is no over the air channel 2 it may say "unusable signal".

Sep 24, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Unusable signal


Had the same problem unplug the tv for hour. Had ours at the tv repair shop and it worked fine there brought it home now we have a great picture but no sound.

Jun 01, 2008 | RCA P52930BL 52" Rear Projection...

1 Answer

61" RCA Projection TV, no picture, "unusable signal" message


Read the suggestion of unplugging the TV for at least 4 hours to re-set to factory specs and that took care of it!

Apr 03, 2008 | RCA HD61LPW165 61" Projection HDTV

1 Answer

"UNUSABLE SIGNAL"


l have a 42 in tv rca connected from a direct satellite and i have no picture or sound tryed different connecters only black screen with unsable signal

Jan 07, 2008 | RCA HD65W140 65" Rear Projection...

1 Answer

Unusable signal


Could be a bad buffer/amp or bad tuner, depending on source selected....accordianman

Dec 08, 2007 | RCA Scenium D40W20 40" Rear Projection...

1 Answer

Poweroutage t.v. won't work now


It sounds like the TV set went to default settings. You should go into the menu again with the original remote and go thru the channel setup or guide plus if you have one. Good Luck PS Please dont forget to rate this thread.

Oct 23, 2006 | Proscan PS50700 50" Rear Projection...

3 Answers

Rca rear projection model#p52926s


The unuseable signal is a common thing that rcas do when the input rf signal is No good . You could have a bad cable line an bad ant. line or a bad tuner or the set is switched to the wrong anttenna input. No for a Hd compatable componet I always start with 1080i and go from there cause thats what is needed for an hdtv set. Good luck

Apr 21, 2006 | RCA P52926 52" Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...