Question about Toshiba Satellite P100 Notebook

1 Answer

GMA 4082n device driver not working properly code 39

HL-DT-ST DVDRAM GMA-4082N ATA DRIVER DEVICE Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) My cd/dvd drive stopped working. it says that the driver HL-Dt-St DVDRAM GMA-4082N ATA Device is corrupt. I tried to update this online but found nothing.......... Could not find any file for this in my hard disc. right now I can see any drive other than C: in my computer. Neeta I have the same pronblem using vista on my  Toshiba satellite P100

Posted by on

  • tixodavies Jun 09, 2008

    The DVD was not been seen but after working through with one of your experts, it was resolved very quickly. Best suppport to pay for. Get results immediately.

  • Glenn Rogers
    Glenn Rogers May 11, 2010

    Have you been able to see your C: drive using this sequence:

    Right click My Computer
    Select Manage from the drop down list
    Then click on Storage
    Logical Drives

    Normally, Vista does not require you to install specific drivers for a CD/DVD drive. That doesn't mean yours doesn't it does mean the one in use is corrupt.

    This would be best if you can see your drives.

    Insert your Vista DVD,
    Start the Installation process,
    Vista will examine your drives for integrity

    Let me know if you get an error message. If you do get a damage error allow Vista to fix it if possible. This may be the only way around this problem.

    Otherwise, continue the install until the Setup programs tells you Windows is already installed. You should see an option here that is called 'Repair" choose that option and let the installer proceed.

    Let me know what you find from my first question, first.

    Regards,
    Worldvet

    Regards,
    Worldvet


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

Thank you for using Fixya.com and glad to hear to got your monies worth.

Regarrds,
Worldvet

Posted on Jun 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver hl dt st dvdram gma 4082n ata device


does need driver because windows make the drivers it self for that hardware

Oct 01, 2013 | HP Computers & Internet

2 Answers

GMA 4082n device driver not working properly code 39


The dvd does not need driver, you need to reinstall Windows.

Jul 18, 2008 | Toshiba Satellite A135 Notebook

1 Answer

HL-DT-ST DVDRAM GMA-4082N ATA DRIVER DEVICE Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) My cd/dvd drive stopped working. it says that the...


backup whatever information you have and run the system recovery through the disks you received when you purchased the computer. If you can perform the recovery then you know the hardware is fine and that you were experiencing software corruption.

Nov 16, 2009 | Toshiba Satellite A135 Notebook

1 Answer

MY LAPTOP DOES NOT RECOGNIZE MY DVD/CD DRIVER... CODE 39


you need to do
1) confirm the dvd driver works ok at other same laptop or find a usb dvd drive adapter to check it works well or not, the dvd driver damage if not
2) check the dvd interface pins (no damage or disconnection) on the motherboard, there is hardware problem that you can not see or heard any lights and driving sounds when the power on

Feb 06, 2009 | Acer Aspire 5610-4648 Notebook

1 Answer

GMA 4082n device driver not working properly code 39


First go into Setup (usually F1,F2 or del) at start-up. See if your drives show up there. With Windows running, right click My Computer, left click Properties, left click Hardware, left click Device Manager, left click DVD/CD-ROM drives. Also check IDE ATA/ATAPI controllers. Do the drives show up there? If they do right click on drive and left click Update Driver. If they are not there go back to System Properties and left click on Add Hardware Wizard. This will search for devices. It may ask you to insert Windows CD which of course you can not do because the drives don't work. Try a different drive. When you cleaned out your computer did you delete or uninstall Office? That may be what caused this problem. None of this may work but it is a starting point.

Jan 06, 2009 | Dell Dimension 4600 PC Desktop

1 Answer

GMA 4082n device driver not working properly code 39


check whether the device is detecting properly on bios or not

Oct 01, 2008 | Computers & Internet

1 Answer

GMA 4082n device driver not working properly code 39


http://support.microsoft.com/kb/314060


Try this article...............hope it should work otherwise would suggest something lese as well......All the best....TC

Jul 20, 2008 | Toshiba Satellite P105-S6104 Notebook

2 Answers

GMA 4082n device driver not working properly code 39


Go back to the device in device manager, right click on it and select properties, then under the driver tab click on "Roll back driver" button and see if that does the trick.

May 07, 2008 | Toshiba Satellite P100 Notebook

1 Answer

GMA 4082n device driver not working properly code 39


sounds like your cd/dvd is mechanically shot. time for a new one.

Mar 09, 2008 | Lenovo 3000 C200 Notebook

3 Answers

GMA 4082n device driver not working properly code 39


no this is basic drive if this driver do not load on ur system check ur drive configuration means jumper setting if that is in master change and get it into slave any , primary or secondary.

Sep 23, 2007 | Computers & Internet

Not finding what you are looking for?

Open Questions:

Toshiba Satellite P100 Notebook Logo

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...