Question about PC Desktops

1 Answer

Dlink Network Adapter

Got a new network adapter Dlink DWA-552. As we have a Dlink Extreme N router. The computer I put the adapter in says cannot start code 10.
It worked for a little bit. took it out and put back in worked for a little bit. Now will not work at all. The little green light on the back does not come on at all.

Posted by on

  • factnurse Jun 09, 2008

    I am running Windows XP

  • factnurse Jun 09, 2008

    With I Believe Service pack 2

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 197 Answers

You will have to take it out and put in another I & O port on the motherboard it is eather white or sometimes they are black or brown and see if that works. iam trying to see what the code 10 is all about . i also need to know what OS you are runing win xp or vista

Posted on Jun 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is this system wifi compatible


Turn on your computer and locate the Wi-Fi icon. This could be located on the upper row on a laptop it will have the radiation look ((())) Make sure its pressed on. Usually a wifi enabled phone, computer, or whatever device, will recognize if there is wifi access near you. Most new HP (Hewlett-Packard) Pavilion notebook computers as of August 2010 include an internal wireless networking adapter, used to connect to a wireless network or router. Once connected to a router, the computer can connect to the Internet or other computers on the same network. If the wireless networking adapter is not allowing the computer to connect to a router, there are several steps that can be used to remedy the problem. Ensure that the wireless network adapter is turned on. Most HP Pavilion notebook computers have a switch that allows you to turn off the wireless adapter. The switch typically is located on the side of the computer or on the front. Ensure that the router and modem are plugged in and functioning. Ensure that the lights are illuminated on each device. Attempt to connect wirelessly using another computer, if possible, to test whether the connection problem is with the router or modem. Unplug the router and modem. Leave the power off for approximately 30 to 60 seconds, then turn them on again. Update the wireless network adapter driver using the computer's "Device Manager." To access the Device Manager, right-click on "Computer" or "My Computer," depending on the version of Windows, and click "Device Manager" from the left-side bar, or from the tab labeled "Hardware." Once in the Device Manager, expand the section labeled "Networking Devices" and right-click on the wireless network adapter. Click "Update driver software" to begin searching for an update. If an update is found, follow the onscreen instructions to install the update. Reinstall the wireless networking adapter if updating the driver does not remedy the problem. To reinstall the wireless adapter driver, right-click on it from the Device Manager and select "Uninstall." Once the device is removed from the computer, restart the computer. Once Windows loads, it will automatically detect and reinstall the driver. Run the Windows 7 Diagnostic Tool (if the computer uses the Windows 7 operating system) to diagnose any networking issues the operating system may be able to correct. To access the Windows 7 Diagnostic Tool, open the "Start" menu and type "Network" into the search field. Click "Network and Sharing Center" and then select "Diagnose and repair" from the left-side bar. The Windows 7 Diagnostic Tool will automatically run and will attempt to repair and establish the wireless connection. Attempt to manually connect to the wireless network. Open the "Network and Sharing Center" and click "Setup a new connection or network." Enter the network name, security type and network key into the text boxes and click "Next." If successful, click "Use the existing network" and then click "Connect." The network name, security type and network key can be obtained from the network administrator or by logging into the router. For help logging into the router, consult the instructions included with the router. Make sure you Ethernet/internet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys navigate to integrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its "Enabled"imake sure key scroll http://support.microsoft.com/

Feb 09, 2013 | HP Pavilion Media Center m8530f...

1 Answer

My computer comes on n gives me an error message saying UNDI Intialized failed, no media detected.


Hi, UNDI is a shorthand for Universal Network Driver Interface.
CAUSE OF ERROR: It sounds as if you are having some trouble with your NIC {Network Interface Card}.This error message can occur if no network adapter is detected in your computer or if no connection to the network is detected when the network adapter is initialized.
RESOLUTION: To resolve this issue, perform network troubleshooting on the hardware.Check the network adapter cable, cable type, hub, router and so on.Also check the computer's BIOS settings to make sure that the network adapter is disabled.Try logging in safe mode and then disable your NIC in control panel.Reboot and see if that solves the problem.If it does you can start looking around for an updated driver or perhaps a new card.Enter the safe mode by pressing the F8 keywhile booting up. Also try doing a system restoreto a earlier point.This also fix your problem.
Thanks for using fixya....Best Wishes...Wish you a happy New year..

Dec 31, 2010 | Dell OptiPlex GX150 PC Desktop

1 Answer

How to install an wirless adapter to mi desktop


Install a wireless network adapterIn areas that are served by a wireless network, you can connect to a computer network without using a cable, and surf the Internet or connect with other computers. To connect to a wireless network, your computer needs a wireless network adapter.
Many new computers-especially laptops-come with wireless adapters. Before using your computer, check to see if it already has a wireless network adapter.
If your computer doesn't have a wireless network adapter, you can install one.
Install a wireless USB network adapter. Most people prefer this type of adapter for any type of computer, because it's easy to install.
Install a wireless CardBus or CF network adapter. For portable computers, this type of adapter (also called a PCMCIA or PC Card) is easier to travel with than a USB adapter, because it is often smaller and fits securely in the PC Card slot on the side of the computer.
Install a wireless internal network adapter. If you have a desktop computer, you may prefer an internal adapter so that you can use the USB port to connect another accessory.
The type of adapter you install depends on your computer and your level of expertise.
How to determine if you already have a wireless network adapterMany portable computers manufactured after 2000 have wireless networking built in. However, because the antenna is hidden inside the computer, it's not easy to see.
To see which network adapters are currently installed in your computer
1.
Click Start, and then click Control Panel.
69010-click-control-panel.gif 2.
Click Network and Internet Connections.
69010-click-network-and-internet-connections.gif 3.
Under or pick a Control Panel icon, click Network Connections.
69010-click-network-connections.gif 4.
Microsoft Windows XP displays your network adapters. Wireless network adapters are labeled Wireless Network Connection. If an adapter displays a red X, it is disconnected. If the Network Connections window is blank, your computer doesn't yet have a wired or wireless network adapter.
69010-view-network-connections-new.gif






















Nov 12, 2010 | PC Desktops

2 Answers

Can i use Bluetooth USB Adapter to connect PC to wireless router?I purchased a new PC that's connected to a wireless router for internet. I want to connect my old PC to the same wireless router. I don't...


Hi, to connect your computer to the wireless network of the router you need to have a wireless adapter. The bluetooth adapter will not work in this case as the router does not communicate with the bluetooth signals.

Purchase a wireless adapter like NETGEAR WG111

Rate it, if it helps.

Regards
Anand

Aug 03, 2009 | PC Desktops

1 Answer

Ineed to reset network adapter each time I turn on wired desktop


You should check to see if there is a router firmware update and also one for your network adapter. You can use Dell's support website for the adapter

Feb 21, 2009 | Dell Inspiron 530 Desktop Computer

2 Answers

I can't install my D-Link DWA-130 Wireless USB Adapter without a CD or getting it online....I can't find an installer online that I can transfer to my other computer...Where can I find one?


You can download the software for this device from this link , just follow the instruction on the web site so you can download the correct software for this adapter
http://www.dlink.com/products/support.asp?pid=566

Nov 10, 2008 | PC Desktops

1 Answer

How to connect wireless router, Netgear WGR614, to my computer?


4 steps to set up your home wireless network
1.
Choose your wireless equipment
The first step is to make sure that you have the equipment you need. As you're looking for products in stores or on the Internet, you might notice that you can choose equipment that supports three different wireless networking technologies: 802.11a, 802.11b, and 802.11g. We recommend 802.11g, because it offers excellent performance and is compatible with almost everything.
Shopping list
• Broadband Internet connection
• Wireless router
• A computer with built-in wireless networking support or a wireless network adapter

A wireless router
The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. Be sure to get a wireless router, and not a wireless access point.
A wireless network adapter
Network adapters wirelessly connect your computer to your wireless router. If you have a newer computer you may already have wireless capabilities built in. If this is the case, then you will not need a wireless network adapter. If you need to purchase an adapter for a desktop computer, buy a USB wireless network adapter. If you have a laptop, buy a PC card-based network adapter. Make sure that you have one adapter for every computer on your network.
Note: To make setup easy, choose a network adapter made by the same vendor that made your wireless router. For example, if you find a good price on a Linksys router, choose a Linksys network adapter to go with it. To make shopping even easier, buy a bundle, such as those available from D-Link, Netgear, Linksys, Microsoft, and Buffalo. If you have a desktop computer, make sure that you have an available USB port to plug the wireless network adapter into. If you don't have any open USB ports, buy a hub to add additional ports.
2.
Connect your wireless router
Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.
wireless_chart.jpg Next, connect your router to your modem:

Oct 29, 2008 | PC Desktops

2 Answers

Hi, have just purchased toshiba satellite pro L300 PSLB1A which has a realtek RTL8187B wireless 802.11b/g 54Mbps usb 2.0 network adapter.(internal) and it refuses to connect to my new Linksys wireless...


If you have more than one computer on your network, try disabling the firewalls on all computers and trying again. If this works, then you need to adjust your firewall settings to allow your network to function properly. If this does not work, you may have to log into your linksys router and check the wireless settings.

Let me know what happens.

Jul 26, 2008 | PC Desktops

1 Answer

We have windows XP desk top. Can't install the drivers for the DWA-111 but the router works fine.


What specific error message/s does your computer prompt when you trying to install the wireless USB adapter? Since your running Windows XP you can skip on "run the CD first", try uninstalling all the componets for the adapter then restart the computer, when the computer is booted up properly insert the USB adapter(preferably used the USB port on the back of your desktop for maximum power). When the found new hardware wizard pops up, choose install software automatically(make sure that the setup CD for the USB adapter is already loaded on the CD-ROM drive then hit next.
If the installation proceeds click on finish a bubble should appear on the lower right hand side of your dekstop screen(syatem tray) prompting you that one or more wireless network is being detected, click the baloon and check if your network will show up on the list.

May 05, 2008 | PC Desktops

1 Answer

I currently have a wireless home network and have purchased a new desktop computer. What is the easiest way to connect the desktop to the wireless home network?


Many wireless routers also come with wired connections. If you can locate your new desktop near the wireless router you can connect to the router using a patch cable (similar to a large phone cord). However, if you do not want to do this, you will need a wireless adapter for your new computer. The adapter should be the same brand as the router to ensure compatibility.

Apr 12, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...