Question about MSI Starcam 370i Webcam

1 Answer

Farrah again hi its me again farrah from trinidad, i am installing the cam but i tried different ways and it just would not install and then when it finally does, its says no video hardware and i have no idea how to solve this problem ,maybe i should by another camera? the cam is not showing any video or anything but it is installing ...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,322 Answers

1st You download Webcam Driver.
Farrah again
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Posted on Feb 22, 2013

2 Suggested Answers

jessee007
  • 306 Answers

SOURCE: my cam is blurry

Hi Farrah from Trinidad. What country is this??? Any way I want you to take your cam in one hand and with the other one I want you to turn the lens with your finger. The black ring around the clear part. Now turn on your camera and do it again but real slowwwww. Hope I could help...PS send us a picture sometime James Jessee

Posted on Jan 12, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have Lenovo G550 laptop with built in Lenovo easy cam. I have installed skype v 5.0.152. It has detected the easy cam but is not working.


Hello there!

Try to uninstall and install again the Skype. Click this LINK for the installation process. If you face the same problem, try to uninstall and install again the driver of your webcam.

If you need further assitance, please let me know.

Regards,
fossildude

Nov 10, 2010 | Computers & Internet

1 Answer

My truck was working fine then when I turned it off and I tried to start it again it wouldnt start and there was a clicking sound when i turned the key and the dash lights were flicking. do you know what...


Yes farrah I do know what is wrong with your car.
My name is Tom and I will work hard to make sure your problem is solved.

If you turn your car off, It is still very hot and things that get hotter expand. When the engine gets hot every part gets hot according to its metal make up. Therefore, the engines starter requires more current to turn the car over.

I would suggest getting the highest cold amperage battery that fits your car. Then I would invest in a "high torque" starter. You can call up any parts store and you can find out if they make one for your car or not. Install both and your problems should be solved.

If I can be of further help do not hesitate to call. If you did get the help you needed please reply

Tom(karatebb2)

Jun 29, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

Hi got my laptop scren replaced now my web cam doesnt work is it because thet forgot to conect it back up


Hi.

Try first going to Acer page and download and install again the Cam drivers.
Also go to Control Panel > Installed hardware, and check if the Cam is listed under installed devices.
Check if cam is disabled, in that case enable it.

If the camera is not there, and installing drivers does not fix the problem, then the repairer may have forgot connecting the 4 pin connector to cam. Call the repairman and ask them how to proceed to have the problem fixed.

Dec 02, 2009 | Acer Computers & Internet

2 Answers

In Yahoo Messenger I cant use my webcam


Hi,
first you properly install the Web Cam Software, then you open the Yahoo messenger and again access the web cam. I hope it will work fine. sometimes yahoo messenger not access to Web Cam, that time yahoo messanger not working properly.

thanks

Aug 14, 2009 | HP Pavilion dv6000z Notebook

1 Answer

I get it installed, I have the disk in, and the cam plugged in, but when I try to turn it on through an IM chat window, it doesn't pick up. Even when i try it a different way, my Install Wizard program...


Try re-installing the webcam driver. You could also try using a different chat client software. Try skype. It has an option for testing the webcam output.

Jun 13, 2009 | HP VGA Webcam

1 Answer

How can i install a cam


Windows vista detects the cam and install a standard drivers.but you need the driver supplied at purchase to make the camera funtion.

Dec 17, 2008 | Microsoft LifeCam VX-1000 Webcam

1 Answer

My cam is blurry


Hi Farrah from Trinidad. What country is this??? Any way I want you to take your cam in one hand and with the other one I want you to turn the lens with your finger. The black ring around the clear part. Now turn on your camera and do it again but real slowwwww. Hope I could help...PS send us a picture sometime James Jessee

Jan 12, 2008 | MSI Starcam 370i Webcam

2 Answers

Webcam


uninstall the software from add/remove programmes and then install again and connect the cam to a different usb port than before.

Nov 24, 2007 | Logitech Webcam

1 Answer

Can't install camera from Logitech Quickcam Pro 5000 on my Gateway laptop


If you mean that it will not install at all, and mean that windows won't recognise your cam; it maybe that you have not updated windows installer 3.1 after you have done a clean install. Click on link to download, apologies if this is'nt what you mean. http://www.microsoft.com/downloads/details.aspx?familyid=889482fc-5f56-4a38-b838-de776fd4138c&displaylang=en

Jan 03, 2007 | Logitech QuickCam Pro 5000 Webcam

Not finding what you are looking for?
MSI Starcam 370i Webcam Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...