- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I will give you the directions and a video that will show you all three whistles: Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.
Thanks Tim These are the locations of all the warp whistles. Warp Whistles: 1.
At the end of World/Level 1-3, there's a white block. White blocks allow
you to "fall into the background", after you stand on them, & duck
for a few seconds. You don't stay in the bg forever, however. Anyway,
run behind the "curtain" at the stage end, & you'll be in a secret
Toad house. Later in the game, one of the letters Princess sends you,
tells you that a whistle is in the darkness at the end of the 3rd world.
This means 1-3, although confusion has come of this, prior to knowledge
of where the whistles are at. 2. World 1 fortress - at the end of
the 1st room. Knock out the dry bones. Get the super leaf, if you aren't
raccoon Mario already. Get a running start, & fly up to the
ceiling. Fly on the ceiling, & keep running right. You'll fall down
in a room, w/ a treasure box, containing the whistle. 3. At the end
of the World 2 map, there's a rock that you have to smash, w/ the hammer
you get from one of the 3 wandering hammer bros. on this map. Only 2
are visible at 1st. The 3rd gives you the whistle. On a side note, the
toad house here will usually give you a frog suit.
Also on a side
note, using a whistle in the warp zone(World 9), will take you directly
to the World 8 pipe in the zone. Warping in world 1 takes you to the
top 3 pipes(worlds 2, 3, & 4), in 2, 3, & 4, the middle pipes,
in worlds 5, & 6, the middle 3 pipes(worlds 5, 6, & 7), & in
worlds 7, or 8, it just takes you to the world 8 pipe.
Though not specifically on a Wii, I have seen this issue with other devises. Place the disk on a flat hard serface like a sheet of glass and see if it is warped, even 1/32nd of an inch will make a difference. This is usually caused from heat warping the disk, espeacially from being left in a car on a hot day or near a heater.
it was not the drive that failed
sorry i cant help more then that im not familuar with xbox's
if you mod chipped it and are now having problems check very carfully for solder drips plops and cross links (us a florsent light & a magnifying glass)
Toys are the best pals for the babies,Some Babies will learn many things slowly and some learns very fast.So you dont have to worry so much.Baby will soon grab toys and play and enjoy.Hope i have sloved your problem.
You will need a Magnifying glass, Flashlight, Toothpick, and Paper towels.
What you need to do is access your laser, and make sure the laser optics are clean. Using the magnifying glass and flashlight, inspect the lens for dust, smudges and lint. Using a Toothpick with a small piece of paper towel swab the lens to clean it. If you need a Cleaning solution, use Windex. If this does not solve the problem, Get a new KHS-400C laser from Ebay. When the new laser arrives, you will need to remove solder blobs from the ribbon circuit strip on the bottom of the laser. These are two small solder blobs near the Ribbon cable connector. I do this with soldering iron, Vise ( to hold the laser), and Solder wick.
Once you have access to the lens. If it is a Old version FAT PS2, use Q-tip and Rubbing alcohol. If it is the Slim or PSP models, use Windex with Qtip. Dry the lens with a dry Qtio Use a magnifying glass and light to be sure you have the lens clean.