Question about Lasko 48" Xtra Air Tower Fan with Air Ionizer

2 Answers

Lasko 2554 Wind Tower Fan

My unit stopped working. Is there a schematic available that I can download or purchase?

Posted by on

  • 5 more comments 
  • Anonymous Jul 04, 2008

    My fan stop also and I don't have a clue.

  • oshelia Jul 16, 2008

    fan stop working

  • oshelia Aug 25, 2008

    Every thing else works on the fan except the fan itself

  • Anonymous Aug 31, 2008

    My Lasko Air Tower Fan with Air Ionizer has also recently stopped working all of a sudden. I have had it for two years. All other features work but the air does not blow.

  • amianda Oct 01, 2008

    Fan was noisy (we had 2 units, the other was much quieter) and then last night the unit just stopped blowing air.  Still occilated and all other buttons seemed to work, but the fan itself stopped.


    I was worried that the fan had become clogged with dust but upon inspection it only looks moderately dusty.


    Any ideas on a solution to this?

  • texlex Oct 04, 2008

    fan will not work at any speed. All buttons work, oscillating, etc, but no air is blowing out.

  • la_dale1 May 05, 2009

    I just had the same problem, the fan stopped working on all speeds but the oscillating does work. I opened it up, cleaned the dust out, the fan spins freely. I was wondering if there was a schematic available?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I have a Lasko HVB, but this might apply to your fan:

Without taking the thing totally apart, here's an idea you can try: The power cord on some models (like mine) has a "warning" tag. I had the damn thing all apart when I noticed this. (Well, who reads 'em??) Seems like there's a mini-fuse in the PLUG itself that, when it blows, there's nothing you can do about it except send it for repair to a factory authorized yadda yadda yadda. Who's going to do that??

If you plug in and NOTHING HAPPENS, here's what might turn out to be an cheap and easy fix: cut off a few inches of the plug end of the cord and go buy another plug at Ace. Heavy duty might be appropriate: don't think I'd want a lamp plug on this baby. Get one that's easy to install. Bring the cut off piece and they'll help you find exactly what you want.

If you want to open it up, there's a screw behind the Lasko medallion, remove that and you can snap out the grille. You can see where the cord comes in from the back of the blower housing. Test the line voltage. If you're not getting about 120VAC, it's the plug.

If that's not it, IMHO, without some knowledge or a schematic, you're screwed. That'd be me. It wasn't the plug.

Good luck!
-Chuck

Posted on Sep 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HOW DO I CLEAN MY LASKO IONIZER TOWER FAN?

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Osilating stopped on lasko 2554 fan


Lasko's are good for stripping the gear in the base that makes it oscillate. If it's still under warranty, they will send you a new fan.

Jul 28, 2016 | Lasko 48" Xtra Air Tower Fan with Air...

1 Answer

My tower fan(not a lasko) but very similar cuts off when i put it to rotate.


Sounds like a short in the wire. Return it before it burns your house down.

Oct 10, 2012 | Lasko 2554 Tower Fan

1 Answer

Where can I find a motor for a lasko FAN model 2554. Motor number is Decomin 2033014 120V 0.45A Thanks.


No guarantee they would see one, but you could start looking here and see what they have to say.....
http://www.decomin.com/product_1.htm

Sep 17, 2010 | Lasko 2554 42" Wind Curve Fan with remote...

1 Answer

My lasko mod 2554 fan powers up but the fan will not work. The fan oscilates and the ionizer and timer lights all work.


It is possible that the main capacitor is faulty and so the coils is not enerrgised to start.
So check winding and check the capacitor for open.
Test capacitor by charging both the pins to mains voltage and shorting the pins to see if charge is retained.If retained the capacitor is good, if not replace.

Sep 08, 2010 | Lasko 2554 Wind Curve Tower Fan with Fresh...

2 Answers

How do you clean a tower fan?


How do we clean the Lasko 2554 tower fan filter please some one help email me at dutchlady_49@yahoo.com

May 05, 2010 | Lasko 2554 WIND CURVE Fan

2 Answers

Cleaning my 2554


there are 20 screws to take apart the fan.
but try this
something to wedge the blade and blow out the fan. it will work jus the same

Jun 28, 2009 | Lasko 2554 WIND CURVE Fan

1 Answer

Where can I find a motor for a lasko FAN model 2554C. Motore number is Decomin 2033014 120V 0.45A Thanks


call up the comp! or if you brought it less than a year they have to replace it the catch is the recipt!

May 09, 2009 | Lasko 2554 42" Wind Curve Fan with remote...

2 Answers

Lasko 2554 tower fan


I just replaced the thermal fuse in the motor case. You can find replacements at Radio Shack. http://www.radioshack.com/product/index.jsp?productId=12505747&utm_source=Google&utm_medium=PPC&utm_term=55048814&utm_content=Exact&utm_campaign=PLA&%7bifmobile:ds_dest_url=http%3A%2F%2Fm.radioshack.com%2Fradioshack%2Fproduct%2Fdetail.do%3FitemId%3d12505747%26utm_source%3dGoogle%26utm_medium%3dPPC%26utm_term%3d55048814%26utm_content%3dExact%26utm_campaign%3dPLA%7d&cagpspn=pla&gclid=CIjo_4_ylrkCFUcGKgodMG0AAA&gclsrc=ds.ds
You will need to open the motor case and carefully cut the heat shrink tube off where the red wire connects to the white wire. I do mean carefully, as you don't want to cut the tiny coil wire soldered to the white wire and the thermal fuse. Cut the old one out, leaving some of the old lead to solder the new one too. Be sure to add new heat shrink tube before soldering the new one in so you can get it all back properly. This certainly took some time and patiance but was better than throwing it out and spending another 60 to 70 bucks.

Aug 06, 2008 | Lasko 2554 Wind Curve Tower Fan with Fresh...

1 Answer

LASKO fan problem


Check for a loose wire in the wiring harness

Sep 01, 2007 | Lasko 2530 Elite WindTower Fan

Not finding what you are looking for?
Lasko 48" Xtra Air Tower Fan with Air Ionizer Logo

Related Topics:

2,566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lasko Fans Experts

Arcadian Duran
Arcadian Duran

Level 2 Expert

284 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Tommy Thomas
Tommy Thomas

Level 3 Expert

430 Answers

Are you a Lasko Fan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...