Question about KDS Radius RAD-7 17" Flat Panel LCD Monitor

2 Answers

Dont know how to turn on

Where is the power cord located on the monitor?

I have Microsoft Windows XP
Professional
Version 2002

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

The monitor has and adapter type power cord that plugs into the computer end of the VGA cable. Look for a small round hole at the PC end of the cable.

Posted on Jul 15, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

If it is a CRT there is a stationary cord which cannot usually be removed from the monitor (unless very old) that has an 15 pin female end. This will plug into either your on board video or your video card. Be sure to tighten the finger screws on each end of that plug. Then you will have to plug manually a power cord (looks just like the power cord to a PC) into the back of the monitor (usually a female 3 prong plug) and other end into the wall socket.

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair a timed out internet connection with xp


Without being in front of your PC, or without knowing any detailed information. My first troubbleshooting attempts would be to go to the command prompt (windowsKey + R) (then type CMD) a command prompt will appear type ipconfig /release (press enter) , then ipconfig /renew (press enter)

Mar 27, 2014 | Microsoft Windows XP Pro with SP3 OEM Full...

2 Answers

'input not supported'


yes it will but u need to adjust it to 1024x 768 60 hertz in settings menu ok

Jan 27, 2008 | Acer AL1916W 19" LCD Monitor

1 Answer

My ViewSonic VX900 won't turn on. I have had it since late 2003 and it has operated flawlessly. Went to turn it on; nothing. No light, no standby light. Checked the power cord against another monitor and...


Hello,

The VX900 has 2 different version of the unit. One version has an external power supply and the other has internal power supply. Since you said you changed the power cord I would guess you have the internal power supply version. The issue you have is caused by the capacitors on the power supply board have overheated and blown out. This is a common problem on many LCD monitors after a few years of use. If you open the back of your monitor and look at the supply board you should see the bulging capacitors. Check our web page at: www.ccl-la.com for Pictures and examples of what to look for and what you need to get to do the repair. If you have any questions let us know on our web site and we will be glad to help you get going again.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Jan 12, 2010 | ViewSonic VX900 19" LCD Monitor

1 Answer

I need the driver for windows xp professional


http://www.asusdriverscenter.com/asus.php?id=asd119

Oct 17, 2009 | ASUS VW195S 19" Widescreen LCD Monitor

1 Answer

When trying to get into many programs


I M USE 3200 SCANNER BUT POWER ADAPTOR IS NOT WORKING

Sep 14, 2009 | HP Compaq V570 (Silver) Monitor

1 Answer

Driver for Vison EZX15F monitor


I have the Vison Monitor and looked all over for the driver and found nothing specific to the monitor. However, I have a dual boot on my pc with XP and Vista and it works well with both. My current driver specs for this monitor are below. I hope this helps:

Driver Provider: Microsoft
Driver Date: 6/6/2001
Driver Version: 5.1.2001.0
Digiral Signer:Microsoft Windows Component Publisher

Jun 19, 2009 | Computer Monitors

2 Answers

L1932TQ LCD Monitor won't turn on.


I'm affraid you did about everything you can to find the issue. Trying to isolate the problem is the best way to come close to a solution eventually. But after all the tests you did, it seems that the monitor itself got a problem. I dont suggest you to try to fix it yourself, some electrical parts may need to be electrically discharged before being removed from the monitor. If your monitor is still in waranty, contact LG for support. Otherwise, you could bring it to a local tv/monitor store to see if they can repair it. LG support rep could also give you some advice, maybe they got a certified partner in your area that could take a look at it. P.S. If your computer is on windows XP it should shut down the usual way just by pressing the power button once. The shutdown will be the same as if you go Start->Shutdown->Shutdown the computer.

Jun 03, 2009 | LG L1932TQ LCD Monitor

2 Answers

The moniter light will blink on and off randomly and the screen also turns on and off with the light. What can I do to fix this?


This is most likely due to power management settings for the monitor.

To address these settings follow the procedure below for your version of Windows.

To establish which version of Windows you have:
Press and hold the Windows Logo Key on your Keyboard + Press Pause Break Key and release.

To adjust power management settings in XP:
Click Start > Control Panel > Power Options > Adjust the drop-down menu for your Monitor.

To adjust power management settings for Vista:
Click Start > Control Panel > Classic View > Power Options > Click "Change Plan Settings under your current plan (the plan with a filled bullet) > Click "Advanced Settings" > Click Display > Click "Turn off display after"
Select 0 for none or choose the duration of inactivity to wait before Windows blanks your screen.

Apr 30, 2009 | Samsung SyncMaster 205BW LCD Monitor

3 Answers

Samsung samtron 55v display problem


assuming that u r a professional..
i guess there is no problem with ur monitor, it sounds like itz due to graphic adapter..either the adapter on ur system main/mother board/agp/pci/pcie is damaged or itz simply 'driver corruption'..
don't panic..check for driver update/download n reinstall graphic/display driver..
however, 1st make sure that the Screen Resolution (1024x768 or as applicable) and Color Quality (32 bit or as applicable) is correct..from Display Settings->Settings tab..
always better to contact system admin/vendor....

Dec 30, 2008 | SAMTRON 55V 15" CRT Monitor

Not finding what you are looking for?
KDS Radius RAD-7 17" Flat Panel LCD Monitor Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top KDS Computer Monitors Experts

yadayada
yadayada

Level 3 Expert

61058 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a KDS Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...