Question about RCA Universal Remote Control

4 Answers

RCA GuidePlus Gemstar Universal Remote Control 242524

I dont have the codes,nor the directions to program my remote control to operate my JVC FS-8000 STEREO or my Magnavox Hi-Fi VCR

Posted by on

  • flwood Jun 28, 2008

    gemstar rca universal remote guide plus

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I need to program my remote for my tv with this gemstar universal remote control "crk76te1 . how do i do this ? its for a zenth televison . thanks

Posted on Oct 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

1-800-Remotes website has the PDF of the manuals to some old remotes. Try there before throwing your old remote away.

Posted on Aug 21, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I need the codes for rca tv's

Posted on Aug 31, 2011

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I'M CONNECTED TO BELL SATILITE. mY TV REMOTE IS RCA UNIVERSAL GUIDE PLUS + GEMSTAR. MY VCR IS CONNECTED TO VIDEO II BUT I DON'T KNOW HOW TO ACCESS IT. cAN YOU HELP ME?

Posted on Apr 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have two RCA remotes. 1st RCU 310 5538P. 2nd RCU 400 2420BB.


Remote Control Support - RCA ' Made for Moments

www.rca.com/support-remotes

RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

RCA Universal Remote Control- Target Programming ...

www.thompsontv.com/rcarc.html
RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

Program an RCA Universal Remote Without a "Code Search ...

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

Jan 23, 2016 | RCA Remote Controls

1 Answer

I would like to program an older Samsung tv to my JVC LP21036-038 Remote I need the codes?


Unfortunately, the JVC LP21036-038 remote can only control JVC devices. It doesn't have any adjustable codes. You can choose between 3 codes (A, B, and C) so that using 3 JVC video devices doesn't result in conflicts. This remote came with the JVC HR-XVC14BU among other devices. The manual for the VCR/DVD player is available from JVC support. The direct link to the manual is http://resources.jvc.com/Resources/00/00/90/LPT1148-001A.pdf . See page 17 of the manual for the details.

I'd recommend you get a cheap universal remote to control the Samsung TV and the JVC vcr/dvd player.

I wish that I had better news for you.

Cindy Wells

Sep 13, 2014 | JVC Lp21036-038 Remote Control

1 Answer

How do I program my RCA TV with a RCA remote and DVD/VCR that is a JVC


HI,
CHECK THE FOLLOWING LINK . ON SEARCH TAB TYPE RCA . YOU WILL GET ALL THE LISTED RCA REMOTE CODES AND HOW TO PROGRAM IT.
Electronics Equipment Repair Center

Jul 13, 2014 | RCA RCU403N Universal 3 Device Remote...

1 Answer

Programing jvc remote control 076NOES010


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
    Code Search Method

    1. Manually turn on the device (TV, VCR, etc.) to be controlled.
    2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
    3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
    4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
    5. Press and release MUTE to install the code. The indicator light goes off.
    Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search

Apr 19, 2012 | JVC YQ20932 Remote Control

1 Answer

How do i program a philips magnavox remote to my dvd/vhs player


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
    Code Search Method
    1. Manually turn on the device (TV, VCR, etc.) to be controlled.
    2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
    3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
    4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
    5. Press and release MUTE to install the code. The indicator light goes off.
    Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Mar 30, 2012 | Philips Magnavox REM-350 Remote Control

1 Answer

Need a code to program a magnavox dvd/vcr for a universal remote control. the remove is a philips cl043. could you find the code for me please?


Hello
The setup codes to check with Magnavox DVD/VCR cobo to Philips CL series remote control are:

0247
[0093 0230] [0598 0230]
0456
[0914 0286] [0969 0286]
Where the code is listed as [### ###] the first is for the DVD and the second is for the VCR. Otherwise just the one code operates both the DVD and the VCR.
Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
Code Search Method
If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

Sep 18, 2011 | Philips Universal PH301S Remote Control

1 Answer

Remote control code for Magnavox 15MF605T/17


oif the codes in setup don't work for the direct tv remote, here is a code list at the end of the post

Great News!! We can program most Philips Universal Remotes with Automatic Code Searh. Here's how it works on most of our remotes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

The above assumes that you want to store the VCR you want under the VCR but, Cable codes under the CBL, etc

Note: if the device does not have a chat channel at a button, you should Play (VCR only) or Power instead.

Here is a Code List on PDF that shoud be universal for most remotes. It worked for me.
http://www.remotecodelist.com/remot...ps-Magnavox_PM525S.pdf

Hope this helps you out, good luck.

Nov 27, 2008 | Philips Magnavox Learning Universal Remote

1 Answer

Phillips magnavox tv/vcr combo need codes to program remote


most universal remote controls will not operate the combo type units. Contact www.remotes.com for a repoacement remote.

Nov 24, 2008 | RCA Universal Remote Control

1 Answer

Programming


Here is your product manual:
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000053128.pdf

It includes the codes2.gif for your remote. :}
If you dont see your product on the code2.gif list try a code search. If this fails your remote might not support your device.

Nov 19, 2007 | Philips PM3S Remote Control

6 Answers

Remote control code for magnavox dvd/vcr combo


I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Remote Controls Logo

9,587 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a RCA Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...