Question about Air Purifiers

2 Answers

How to reset hrv filter light - Air Purifiers

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1: Press the how to reset hrv filter light - clip_image001.jpg button to turn off the screen.


2: Press and hold the down arrow button until an 02 appears in the Roof Temp, when you see the 02 appear remove your finger.


3: Using the clip_image001.jpg button - short continuous pushes until you see 02 on the top (Roof Temp) and 5 underneath (House Temp) NB: The light should go off.


4: Press the and this will save your changes.

Posted on Jan 08, 2013

  • 1 more comment 
  • martensj
    martensj Jan 22, 2013



    1.
    Turn off control panel using the POWER button


    2.
    Hold down arrow pointing down for 8 seconds
    until a 02 comes up where the roof temperature should be (a 01 comes up first
    but keep holding until the 01 changes to a 02 - don't let go when you see 01).
    Below the 02 will be another number.


    3.
    Increase the 02 to 22 using the up arrow button
    (not holding it down, short continuous pushes).


    4.
    Below the 22 you will see a 0. Increase the 0 by
    pressing the power button until you go up to 5.


    5.
    Press the FUNC button to save your settings
    & take you back to the main screen.


    6.
    You will now see that the filter light has
    switched off


    1. Turn off control panel using the POWER button

    2. Hold down arrow pointing down for 8 seconds until a 02 comes up where the roof temperature should be (a 01 comes up first but keep holding until the 01 changes to a 02 - don't let go when you see 01). Below the 02 will be another number.

    3. Increase the 02 to 22 using the up arrow button (not holding it down, short continuous pushes).

    4. Below the 22 you will see a 0. Increase the 0 by pressing the power button until you go up to 5.

    5. Press the FUNC button to save your settings & take you back to the main screen.

    6. You will now see that the filter light has switched off

  • Lorraine Ellis Smith
    Lorraine Ellis Smith Jun 20, 2015

    Thank you works well

  • Scott Bosher
    Scott Bosher Jul 04, 2018

    Hi there, do you have set up instructions for the HRV control panel. thanks Scott

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Which button can safe the change? i could see the picture

Posted on Dec 31, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

jdvillanueva
  • 2098 Answers

SOURCE: fitted new filters in hrv

Hi cpttubwash,
We are glad that your problem has already been solved.
Listed information will help other people in the future with same problem as what you've encountered.
Have a nice day! Thanks for using Fixya.

Posted on May 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can somebody help fix the problem I'm having with my Honeywell air purifier....when I press power button it won't work all I see is red light any button I press red it wont do anything....pls!!!!.....


I have the same unit.
Have you cleaned out the removable filters?
also the red light at the bottom indicates the time to clean the filters.
to reset it, use a paper clip. The red light on the bottom right is the filter indicator light, what looks like it should be a light beside that filter light, is actually a reset button, just poke it with a paper clip for a few seconds to reset. The bottom red light goes out

Jun 07, 2016 | Honeywell Air Purifiers

Tip

How to Reset Your Air Purifier Filter Light


<span style="font-weight: bold;">Airgle Air Purifier:</span><br /> <ol> <li>Turn off and unplug the unit </li> <li>Press the light button to the "on" position </li> <li>Plug in the unit, and then release the button after the Filter-check starts</li> <li>The system will automatically reset the Filter-Check Gauge in about 25 seconds</li> <li>Once the procedure has completed resetting, please turn on the unit and press "Filter Check" button again.</li> <li>This time, the system should report an accurate result. </li></ol><span style="font-weight: bold;">Alive Air Purifier:</span><br /> <ol> <li>Insert a straightened out paper clip into the reset hole, with the unit off, and push the Timer button.</li> <li>You should hear a 2 beeps, signaling that the Reset was successful.</li></ol><span style="font-weight: bold;">Holmes Air Purifier:</span><br /> <ol> <li>Units which have an indicator light must be reset once the HEPA filter has been replaced. Reset indicator by inserting a small object (such as a pin or paperclip) into the hole marked reset.</li></ol><span style="font-weight: bold;">Honeywell Air Purifier:</span><br /> <ol> <li>Reset the filter indicator by pressing and holding the "Filter Monitor" button until the indicator light shuts off.</li></ol>or<br /> <ol> <li>With the unit powered on, press and hold the appropriate filter<br />indicator button down for approximately 10 seconds until the<br />light turns off.</li></ol><span style="font-weight: bold;">Hunter Air Purifier:</span><br /> <ol> <li>Change the filter and/or pre-filter.</li> <li>Now, you must choose which counter you want to reset. Press and hold the filter reset key (approximately three seconds) until the prefilter indicator flashes. Press and release the reset key again to alternate between the two indicators. The counter that will be reset is designated by the flashing indicator. For Models 36394 and 36395: Use the tip of a pen or pencil to press the key.</li> <li>Once you have the correct indicator flashing, press and hold the reset key for three seconds to reset that counter to zero hours. The indicator will stop flashing when it has been reset. If needed, repeat these steps to reset the other counter.</li></ol><span style="font-weight: bold;">IQAir Air Purifier:</span><br /> <ol> <li>To reach the Filter Life Reset function from the main display window, press the Menu key seven times.</li> <li>Press and hold the Enter key until the flashing cursor appears. Release the Enter key. The first filter selection to appear is the Pre-Filter.</li> <li>Press the Up Arrow key to select the filter that has been replaced. The Filter Life LED for the appropriate filter is now flashing red.</li> <li>Press the Enter key to confirm that the selected filter has been replaced. The filter life LED for the appropriate filter is now flashing red.</li> <li>Press the Enter key one more time to confirm the filter change or to exit without resetting the filter life, press the Menu key (M=Menu).</li> <li>Upon successful reset of the filter life, the new remaining filter life (taking the currently selected fan speed into account) will be displayed, and the filter LED light on the control panel will change from red to green.</li></ol><span style="font-weight: bold;">Kenmore Air Purifier:</span><br /> <ol> <li>Press the FUNCTION and OFF TIMER buttons at the same time for five seconds. The CHANGE FILTER INDICATOR will flash five times and turn off </li></ol>

on Jun 17, 2011 | Air Purifiers

1 Answer

How do I reset the "replace filter" light? I put a new filter in an don't know how to make the red light go out. Thank you


With the unit on - take off the front panel - right under where the "replace filter" light is, there is a button that says "Reset" hold that button in until it beeps - then the light should turn off. Hope this helps :)

Jul 31, 2010 | Winix PlasmaWave 5000 Air Purifier

1 Answer

V5 filter replace - how to reset red flashing light?


Hello,

So after you have replaced the V5 Cell Filter in the IQ Air, here are the steps you'll need to follow in order to reset the filter indicators:

  • At the main menu on the control panel, push the menu button 7 times until you get to the screen that says Replace Filter.
  • At the Replace Filter screen, press and hold the Enter Key until the cursor appears, and is flashing.
  • Press the UP arrow button on the keypad until you get to the V5 Cell Filter.
  • At the V5 Cell Filter screen press the Enter Key to confirm your filter reset selection. This will turn the corresponding filter LED to a flashing red light. IQAir requires that your reconfirm the filter selection to prevent inadvertently resetting the wrong filter. If you chose the wrong filter, press the menu key after pressing the enter the first time to disregard the filter change command.
  • To confirm the filter reset selection, press enter a second time, which will reset the filter life, and reset the filter hours.
You can repeat these instructions for the other two filters on your machine when it's time. Here's a link to the product manual for your IQ Air Health Pro Plus which will give you the same instructions, as well as other maintenance instructions.

http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/IQAir-healthpro-plus-owners-manual.pdf

I hope that this information was helpful to you. If you were able to reset your filter, please be kind and rate the repair as helpful by clicking the thumbs up icons in the top of my repair. This is what really keeps Fixya experts continue leaving free repair solutions. Thank you very much,

Chris J.
GoVacuum

Apr 08, 2010 | IQAir HealthPro Plus Air Purifier

1 Answer

Lights still flashing after i replaced filter


You have to press the reset button on some models. The unit does not have any way of knowing you reset the filter -- you have to tell it.

Mar 22, 2009 | Hunter (30067) Air Purifier

1 Answer

Turn off reset button


IF RESET DOES NOT WORK DON'T WORRY
AS LONG AS YOU REMEMBER TO CHANGE
THE FILTER. CHARCOAL WHEN DIRTY AND
HEPA ONCE A YEAR OR SO.

Mar 19, 2009 | Whirlpool Whispure (45030) Air Purifier

3 Answers

Red light won't go off


To RESET the Electronic Filter Check:
When the filter check light remains on,it is time to check/clean the HEPA-Type
filters and reset the filter check,if needed. With the unit powered on,insert the tip of a ball-point pen or
paperclip into the hole next to the LED filter check light and hold for approximately 5 seconds until the
light turns off (Fig 5). Depending upon your individual usage (environment and hours used),you may need
to check and clean the filters more or less frequently. If the HEPA-Type filters are cleaned before the filter
check light turns on,the filter check should be reset at the same time.
These cleaning intervals are intended as guidelines only. Performance of any filter media is dependent
upon the concentration of contaminates going through the system. High concentrations of contaminates
such as dust,pet dander and smoking will reduce the useful performance of the filter.
NOTE:The HEPA-Type filters are not washable.
Fig.5

May 24, 2008 | Honeywell HHT-090 Air Purifier

1 Answer

Kaz Honeywell Tower Air filter rest light


When the filter monitor light remains on, it is time to check/clean the IFD™ filters and reset the filter
monitor, if needed. With the unit powered on, insert the tip of a ball-point pen or paperclip next to the LED
filter check light and hold for approximately 5 seconds until the light turns off (Fig. 3). Depending upon
your individual usage (environment and hours used), you may need to check and clean the filters more or
less frequently. If the IFD™ filters are cleaned before the filter monitor light turns on, the filter monitor
should be reset at the same time.

May 18, 2008 | Kaz Honeywell Tower Air Purifier with IFD...

3 Answers

Reset filter


The solution is simple. Just press on the little red light that says to reset filter. Its a button that will reset the warning and the light should go out

May 14, 2007 | Kaz Honeywell Tower Air Purifier with IFD...

Not finding what you are looking for?
Air Purifiers Logo

Related Topics:

10,714 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Purifiers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Michael Youngman
Michael Youngman

Level 2 Expert

296 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you an Air Purifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...