- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The lamp door should be in owner manual, usually on rear of set, a screw or two and square door should come off, two more hold the lamp in place and with them backed out grasp the handle and pull the cartridge with lamp out--it slides out.
Purchase a good lamp with the cartridge (not just a bulb you have to install in old cartridge) and slide new cartridge in and secure the two screws that hold it and PUT THE OUTER DOOR AND SCREWS BACK.
Thats it, this unit shows as using the most popular lamp of all the Panasonic sets.
This model uses the LIFI lamp ***'y. It's not a customer servicable part so you'll have to call authorized Panasonic service center to change. However, the lamp does carry a 5 year warranty so do not fear. To answer your question, the lamp is on the right side of the unit as you look from the rear.
Your lamp needs changed, after removing the lamp it might still, look good, but it is bad. After a while the bulb builds up a internal resistance, and it makes the TV hard to start, and then it gets to the point where it will not come on at all. You can go to www.partstore.com and get a new lamp, and that should take care of your problem.
We replaced the lamp on our pr61lcx65 rear projector panasonic tv. We still have colorful spots and now it is getting darker and have yellow on bright picture and red on dark picture running through it. Please help.
This unit does not have the usual lamp assembly that most do. On this unit the whole light engine has to be removed to replace the lamp assembly. Part number is LFS4000PA1 and cost is $1,351.95 @ www.partstore.com.