Question about RCA P52937 52" Rear Projection Television

1 Answer

Rca tv where exactly is this fuse link? i have that exact tv and cannot locate any kind of fuse

Posted by on

  • ravemaster Jun 16, 2008

    ok i found it i was looking for a glass fuse or something of that nature not a capacitor looking link thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,030 Answers

I assume you speaking of the fusable link that causes the convergence problem... IF the convergence option is not visable in the setup menu. then possibley FL231 is the problem this is a small rectangular fuse brown or tan in color. this is located on the deflection board on left of the set from the back. there is a large black component with a large wire coming out of the top. this is the flyback.. to the right of it on the board is three small rectangular componts brown or tan in color. the fl231 is the middle one of these. the curcit board has index markings like a map these components are located in Q5 Quadrant. When replacing this rember to resolder connections on flyback(that large black thing with wire out the top) This is why the fuse blew to begin with

Posted on Jun 09, 2008

  • Willie Howell Jun 09, 2008

    this is only for rca itc222 chasis

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where are fuses located in RCA model SLD65A55RQ LED TV?


Fuse [Main] can be located at its power supply regulator [SMPS] board. There is a fuse at its T'Con board too.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

Aug 19, 2016 | RCA Projection Televisions

1 Answer

Location view of 2.5 chem fuses


Fuses in the ws65809 are identified by a location number printed top and bottom on the board---need a link for the full service manual for this TV?

What exactly is problem and such.

Apr 29, 2012 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

I'm lost/misplaced the user manual for my RCA Home Theatre Premiere TV and am trying to find the procedure to to locate a suitsable AV channel to play my Wireless60 Gaming System


Just downloaded my "RCA SUER GUIDE" FOR MY 1994 RCA COLOR TV. i WENT TO WWW.RCA.COM AND ENTERED MY INFO OF BRAND TYPE OF PRODUCT AND MODEL #, got exactly what I needed. Try it out.

Sep 03, 2011 | Projection Televisions

1 Answer

R56WH78 RCA TV FlyBack


Resolder all the pinns on the FBT chances are FBT is Bad they go out alot Call UED for Parts 1-800-648-6657

Oct 19, 2009 | RCA R56WH76 Projection Television

1 Answer

Screen looks like it is in 3D and no longer have access to the covergence setting.


Very easy repair you will need to replace FL231, DL231 and CL230 you can get them at the following link under RCA parts category and they send instructions. Cost about 11.00 shipping is free within the US
http://servicemanuals.vstore.ca/

Apr 28, 2009 | RCA D52W23 52" HDTV CRT TV

2 Answers

Convergence problem


If the convergence is out on that set you most likely do not need to make an adjustment the circuit will need to be repaired. There is a stk on the convergence amp board that needs to be replaced. A good tv shop will run you somewhere between $300-$500 to do the repair

Oct 28, 2008 | RCA P56923BL 56" Rear Projection...

1 Answer

How to align projectors


It could be a fault in the convergance power supply. Located on the right hand side looking from the back. What fuse was blown. ?

Oct 12, 2008 | RCA P46924 46" Rear Projection Television

2 Answers

Rca tv


It sounds as if you need convergence circuit repair and re-alignment

Aug 19, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Fusible link keeps blowing out , shutting tv off


Arynsunn,

Thanks to you, I was able to find the solution to my problem.
Have you tried using the correct Fusible Link? I noticed in another post that you said you replaced it with a 500ma instead of the 400ma. I had the same original problem as you and found the exact fuseible links at www.mouser.com. Part# 576-3960400000 Littelfuse Fuses - A 125V UL TL LL .400A . They are only 55 cents plus shipping. I bought 5 for under $10 shipped. Only took 2 days to get them. My TV works like a charm now! I too thought I may need to replace the IC's but thankfully my TV is working fine. If you did need to replace them, where were they located? I couldn't find any stk IC's inside either and the IC's on the heat sinks are all small. Just trying to be proactive, in case I ever need to replace them.

Jan 05, 2008 | RCA R52WM24 52" HDTV Projection Television

Not finding what you are looking for?
RCA P52937 52" Rear Projection Television Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...