Question about Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

1 Answer

Spinner replacement - Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 43,501 Answers

Hi, I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works like new... However I have also found that if theheating element goes bad then that also can mess things up bad... So I wouldbuy new spray arms, and also check out the heating element to make sure it isworking... Here is a tip that will help you with the online buying...
Dishwasher Spray Arms not Spinning

How to Buy Appliance Parts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial "explanation very clear. will give it a go and see howsimple it was. thanks Ronnie " - ronnieshomes
./

Posted on Oct 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need replacement pan and spinner


You can try these guys. I have ordered a replacement pan from them for my Toastmaster.

http://www.abtecparts.com/toastmaster_breadmakers.htm

Jan 10, 2014 | Breadman TR888 Corner Bakery Bread Maker

1 Answer

Can someone tell me how to replace a broken prop for the super cub? Thanks David


Pull spinner off by placing finger tips under lower edge of spinner between where prop comes out and pulling straight off. The spinner on tight so it takes quite a bit of pressure. The plastic is quite strong so don't worry about breaking it.

Aug 18, 2011 | Hobby Zone Hobbyzone Super Cub Propeller...

1 Answer

Replace tub seal in top load neptune


I‘ll be watching your progress real close with the Tub Seal replacement. I’m going to run this machine into the ground and I’m sure I will develop a Tub Seal leak down the road. I have nothing to offer other then the mention in the SM on page 49 about making sure “”When installing a new seal, make sure the sleeve from the previous seal has been removed and discarded.””. Did you purchase or borrow this tool to remove the spinner nut Spinner Tool $25, or is there another way to remove the Spinner Nut? Good luck. Rich

Jun 05, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Need instructions for replacing spinner motor


figured it out by oursleves - part came of old motor by twisting opposite direction to spin and pulling.

Apr 12, 2009 | Washing Machines

3 Answers

The "spinner, 3rd level wash" kept falling off. Ordered new part, no instructions with it.


I had the same problem, the 3rd level spinner falling off. Without getting into my saga story, save yourself some $$$.
-You will need a screw & washer to replace the plastic thumbtack. The screw will have to be able to screw into the female part of the spinner; the washer will keep the screw from falling out of the hole in the flat hose on the ceiling of the dishwasher.
-If you look closely at the spinner(the part that keeps falling off), you will notice it comes apart. With a flat head screwdriver, separate the 2 parts. (there are 3 parts all together; Keep the round center piece sticking out of the top peice)
--Remove the top drawer of the dishwasher to give you some room to work
-Remove the screw on the "ceiling" of the dishwasher(it is located further back from where the spinner goes) to allow the flat pastic tube to come down low enough for you to get in behind it.(set that screw aside in a safe place; you will put it back later)
-Remove the pastic thumbtack from the hole in the flat plastic tube if it is there & replace with a washer and screw.
-Take the top 2 peices of the spinner, together as assembled & screw the screw into the female portion of the spinner.
-snap on the 3rd piece of the spinner
-replace the screw you took out earlier, securing the flat plastic tube.
-place top drawer
Voila, you are done!! You just saved yourself $20+

May 12, 2007 | Kenmore 24 in. 17032 Built-in Dishwasher

1 Answer

Upper Spinner Falls off


rachir...I believe the manufacturer redesigned this spinner. You can find the part at this link http://www.repairclinic.com/0080.asp Catriver...post back.

Jan 11, 2007 | Kenmore 24 in. 17032 Built-in Dishwasher

Not finding what you are looking for?
Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Fred Sops

Level 2 Expert

351 Answers

vince

Level 3 Expert

1234 Answers

D. E. Hev

Level 3 Expert

1187 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...