E2-prom error model # tx-sr805 - Onkyo HT510 Receiver

Display Panel Problem....

my Onkyo TX-SR805 AV receiver works properly except No Display on the front panel.

I follow the instruction troubleshooting on the manual by resetting the unit but to no avail. It's beyond warranty period.

please help, thank you

LOCATION R3910 SHOULD BE CHANGED TO 10 OHM 1 WATT ON POWER SUPPLY BOARD LOC. NUMBER IS U37

have you checked these out , also you can contact the seller for other parts.
check it out !
http://shop.ebay.com/items/_W0QQ_nkwZonkyoQ20partsQQ_armrsZ1QQ_fromZQQ_mdoZQQ_sopZ12

You might just have to upgrade the desktop software to work with the TX.  You can keep your names and addresses but you have to check with each program to see if there compatible or not since the TX uses Palm OS 5.  Most of the software available today is written for that operating system.
I don't believe Palm is even supporting the E2 anymore.

Resetting the unit MAY work, however you will reset everything to factory and have to set it all up again. If resetting does not work, sounds like you will be looking for your local, friendly rrepair shop. Onkyo carries a two year warranty on these units, hopefully yours is still under. If not I would contact ONKYO directly because it seems they have had A LOT of problems with the screen on the 805 and 875 models

I'd suggest to factory reset your XBox.

Yes that would be your receiver. sending it back was the right choice. Good job :] i wish u luck if they send another one.

The unit will not outside the us.We have a different scan freq.

Talked to tech support at Onkyo and there seems to be two (2) places you can hook your sub up to. I placed mine in the wrong slot. So please double check where you placed the sub connection.