Question about Sanyo PLC XU35 Multimedia Projector

1 Answer

Sanyo PLC-XU47 seems to power cycle

I have a Sanyo PLC-XU47 projector. When it's pluged in the power LED flashes red and the fan motors are running. After about 2 min. the LED is a steady green to indicate that everything is ready. However the projecor light doesn't turn on and the power LED starts flashing red again. The cycle continues that way. I don't believe that it's the LAMP but perhaps a thermister (temperature sensor) any giudence into the repair would be great.

Posted by on

  • Anonymous Aug 25, 2008

    same here

  • prince0fpers Sep 17, 2008

    I have the same problem, the project starts on power red, then green after I power on and the fans come on but no light and after a short while the power light goes red again. Any help would be fantastic.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Welcome to resolve the problem if you please say what are the solution to me the same problem

Posted on Aug 23, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Sanyo pro x projector lamp led is red

1,Check the fans ,whether the fan is running,when you turn on the projector

2,if the fans run, then ,check the lamp or lamp ballast

Have a good day!

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,

motherboard, powersupply ... with high quality and competitive price.

Jerry Lampdeng Limited

Apr 23, 2012 | Sanyo (6102932751) Projector Lamp for...

1 Answer

No focus

lamp isn't striking. either the lamp is blown (check for burn spots or cracks) or the ballast isn't firing the lamp. either way, one of them need replacing.

Aug 04, 2009 | Sanyo PLC-XU47 Multimedia Projector

1 Answer

Power light blinking red

if the lamp goes out after the red led goes on, there is a fan issue and the projector is overheating or the ballast/power supply can't hold the voltage.

Aug 04, 2009 | Sanyo PLC-XU47 LCD Projector

1 Answer

How do i change a bulb please

Hi - You can download the manual from the link underlined in blue below:


See page 48:


Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!


Aug 29, 2008 | Sanyo PLC-XU47 Multimedia Projector

1 Answer

I am getting the warning light come on as soon as u turn it on and about 10 seconds later the projector turns off

can be a sensor problem or powerboard failure.Check if the fans are spinning.
Is your lamp life over time?

Jun 15, 2008 | Sanyo PLC-XU47 Multimedia Projector

1 Answer

Sanyo PRO xtraX Multimedia Projector Mod.# PLC-XP1ONA

this is the normal condition> only when green led is off and warning temp led(yellow) is on something is wrong!!

Jun 08, 2008 | Sanyo PLC XU35 Multimedia Projector

1 Answer



If you accidentally lock the projector, you need to disconnect the AC power cord. Then HOLD the SELECT button at the same time as reconnecting the AC power cord again.

This should reset the lock out.

Dec 24, 2007 | Sanyo PLC-XU47 Multimedia Projector

2 Answers

Permanent Coloured tint

When the image turns pink, we find that replacing the cable between the projector and the lap top fixes the problem.

Sep 10, 2007 | Sanyo PLC-XU47 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC XU35 Multimedia Projector Logo

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Office Equipment & Supplies Experts


Level 3 Expert

2237 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75169 Answers

Are you a Sanyo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides