Cd stuck in player not ejecting or accepting other cds
The cd stuck in player wont come out and not sure which slot it is in as i cant see it and all 5 lights are flashing. dont have an codes as just brought car. doesnt accept cds unless i push them in but then they still wont play... any ideas or do i need a new one? thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have a look for a small hole in the front of the CD player - this is the emergency eject button. Find a paper clip, unwind it and then press the paper clip through the hole - the CD should then eject the first CD and you will then be able to eject the others.
sounds like the tray inside was misaligned when the cd went in. and it probally sent the disc into a occupied slot. you will have to remove radio and disassemble to repair. also try just unpluging radio and plug back in. sometimes it resets the radio and will start ejecting the cds
I've had this happen before with car stereo's uh i just normally unscrew the screws out of the top of the player to where you can get to the tray or slot for the cds and force the cd tray or the cd itself out but be careful and not break the cd this might work it usually does for me
The safest way to get the cartridge out is to pop the top on the unit. Once this is done, chances are good that you will find a cd that's jammed between the player and the cartridge. It tried to put the disc into the wrong slot.
Gently push the cd onto the player, then plug it back in, it should reset as normal then allow you to eject the cartridge. If you still have an issue post a comment and I can help you some more. Hope this helps
See if there is any reset button which is usually located easily once the face is off. You need something with a small poited end. try not to use metallic object. If you have to make sure it goes in straght so as not to slip an ground something. Good luck this solve the problem sometimes.