Question about Kyocera Mita KM-1650 All-In-One Printer
Its code for fusing unit...you can reaset this one ,,go to service mode then 163
Posted on Sep 27, 2014
C -6 and 400
Posted on Jun 26, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Error C6400 appears in Kyocera FS118 when Zero crossing signal problem occurs i.e when the engine PWB doesnt detect the zero crossing signal. This can occur due to --
#1 Poor contact in the connector terminals.
#2 Defective power supply PWB.
#3 Defective engine PWB.
To reset it from Mainatince mode turn the power switch off and open the front cover. Now, turn the power switch on and press the system menu/counter key to enter the maintenance mode.
1. Press the enter key. A selection item appears.
2. Select Execute using the up/down cursor keys.
3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020,
C6050, and C6400 are reset.)
4. After this is complete press the back key. The indication for selecting a maintenance item No. appears.
Posted on Jun 21, 2010
SOURCE: Kyocera 3900DN Error Code
F030 General failure
Miscellaneous failure with the main
PWB, other than F000, F010, F020,
F040 and F226, above.
Turn the power switch off/on to restart the
printer.If the error is not resolved, replace
Posted on Sep 16, 2008
Tips for a great answer:
Dec 02, 2016 | Kyocera Office Equipment & Supplies
Jul 07, 2016 | Kyocera Mita KM-2550 All-In-One Laser...
Dec 19, 2015 | Kyocera Office Equipment & Supplies
Dec 17, 2014 | Kyocera Office Equipment & Supplies
Feb 25, 2011 | Kyocera TASKalfa 180 Copier
May 31, 2009 | Kyocera FS-1118MFP Laser Printer
1,926 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: