Good pic, no sound..turned tv off...now it will ot come back on....red light on front of tv panel blinks and makes a clicking noise. I have unplugged, checked connections, etc. what could this be...we have never had any problems..thank you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ http://electro-medical.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience.
HOW TO PROGRAM Remote Control DOING CODE SEARCH
1. turn on device 2. press setup (underneath on/off) till red light stays on then take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinks off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code
How many times this standby/power light
blinks at one time switch ON? Count it
carefully. These blinks are fault
indication, and known as blinking codes.
From the number of blinks occur at one time switch ON; you can get an
idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the
Samsung told me this was a common problem and I would have to have it serviced by an authorized repair facility. My problem ended up being the internal power supply, but they also told me the main boards burn up.
Blinking of power LED are fault indications. Count the number of blinks occur at one time switch on. For this number, you can get an idea about the faulty section circuit inside it. It will make troubleshooting much narrower. If you wish to get more details about the blinking codes, check this link. Pull up older posts there.
OKAY TRY THIS..
DO STEPS 1-3 AGAIN AND ONCE IT TURNS OFF KEEP CLICKING THE CURSOR UP A COUPLE TIMES.
THEN START CLICKING THE CURSOR DOWN SLOWLY TELL THE TV TURNS BACK ON AND ONCE IT CLICKS BACK ON HIT THE TV BUTTON ON THE TOP OF THE REMOTE ..
IF THE LIGHT BLINKS TWO OR THREE TIMES MORE THEN LIKELY YOU'VE PROGRAMED IT =)
AND NOW KICK BACK RELAX AND ENJOY A COLD BEER FOR THE BOTH OF US =)
Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.
Press tv on your Sky remote control again.
Key in the code 0157. The light on the Sky
remote control blinks twice. If the light blinks once only, recheck the
code you entered and start again at Step 1.
Press the standby button on your Sky remote control. If your TV switches off, press select. The light on the Sky remote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code).
make sure the batteries are good and installed correctly.
turn on device(manually)
press and hold (setup) button until the red indicator stays on. then release the set up button.
press and release device button(tv,vcr ect) the red indicator light will blink, then stay lit.
press channel up until the device changes channel.The red indicator light blinks and stays lit.if you over shoot the code required press channel down to back track.
now press and release the mute button to lock in the code.