Question about Gb Electrical 100 Amp GE Load Center

1 Answer

Do you hhave a wireing picture or plan to wire the load center

Posted by on


1 Answer

Here are links that show basic wiring inside a breaker box.

Please look at the images.
If you need more help, answer back and we'll go to the next step

Breaker size:
15 amp breaker connects to 14 gauge wire
20 amp breaker connects to 12 gauge wire
30 amp breaker connects to 10 gauge wire
Home Depot and Lowes have a breaker and wire size size chart next to wire cutting machine
These stores have guys who know the basic breaker size for your big appliances
Each appliance has a name plate showing wattage and voltage.
The wattage tells you what size wire.
The voltage tells you what size breaker and whether you need a 120V breaker or 240V breaker.

To lay out your home wiring:
The kitchen microwave needs a 20Amp 120V 'dedicated' line that goes just to the microwave.
The rest of the kitchen plugs are served by another 20 amp 120V breaker
When laying out rest of house, figure how much wattage might be used in an area.
For example the den might have a big 500Watt TV, and 2 ceiling fans and 4 lights.
Add up the wattage and decide how many plugs and switches you want on each breaker.
Now let's say you have a 20Amp breaker which can carry 1920 Watts for the den.
Inside the breaker box you have a 12 gauge wire for the 20 Amp breaker.
The 12 gauge wire has a black, white and bare ground.
The black connects to breaker. The white and ground connect to Neutral busbar.
The 12 gauge wire leaves the breaker box and goes to the first box in the den.
This box is your junction box.
The junction box can be a switch box or a ceiling light box.
You cannot have any junction boxes that are covered by drywall.
Junction boxes must be accessible. All boxes must be accessible.
For example, you choose a ceiling box for your junction box.
The junction box is also the same box your ceiling light connect to.
From your junction box, you branch off a wire that goes to next box.
And then a wire branches off next box and goes to next box. And so on.

If you need more help, answer back and we can help.

Posted on Oct 24, 2010


1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What do I do with the 2 yellow wires ???

Sounds like the wires are for fan and are supposed to go to a capactor

I’m happy to help further over the phone at

May 30, 2015 | Dometic Rooftop RV Air Conditioner

2 Answers

2004 stratus windows won't go up. Tried replacing master switch, fuses but still won't make a sound to roll up the window. was told maybe bad ground but i hhave no clue where to start with that. Help...

Each window has its own motor and they are located inside the door so remove the inside door panel and then you should be able to check all wiring to the motors check with a test light to confirm power to motor if power is there continue to check the ground wire for proper connection! If all else fails you could always Google :)

Nov 09, 2014 | 2004 Dodge Stratus

1 Answer

Can anyone supply manual for clarion pu1562a

Go to radio shake look for cable they can help

Jun 02, 2014 | Audio Players & Recorders

1 Answer

How do you hook up a toggel switch?

are you planning on just trying to control 1 load, in a car? If so the switch simply will go in line with one of the wires. A single trow single pole means on & of for 1 wire In this case the Positive lead will get the switch. You will just have to cut the positive wires near where the switch is needed and connect each end to the switch. It may also be a 3 position single throw single pole (if it has 3 legs) then use one end leg and one connected to the center leg meaning it will be an on, off, on. This will cut the flow of voltage to the load on the positive wire the same as the 2 leg switch. If it's in you house with AC voltage it's advisable to use a switch that will cut voltage to both wires since AC will still shock you with only 1 wire. It remains live. That type of switch is referred to as a single throw double pole. Meaning on and off but has 4 legs coming off of it cutting voltage to both wires.

Apr 03, 2013 | Alpine MRD-M1000 Car Audio Amplifier

1 Answer

I fixed the control panel board and mixed up the wiring order please send a picture of what wire goes where?

It is best to check this out with an experienced person or service center as one worng connection can damage the panel board and be a costly repair.

Jun 27, 2012 | Kenmore HE2 Plus Front Load Washer

1 Answer

I hhave 2 plugs that is misfiring, have replace coil, plugs, and wires, still the same result check enginelight still on

Take the ignition controll module off(under the coil packs) and have it tested at autozone or oreillys if it is bad one or more coil packs will not work.

May 10, 2011 | Ford Taurus Cars & Trucks

1 Answer

What gauge wire do I need to lead into the BR816L125R load center? it is going to the feed through lugs off my 200 amp service breaker.

Hi .. If the load center is next to the main panel you can use #2 copper or #1aught aluminum. You need to use 4 wires .. two hot, neutral, and ground. And in your load center you will need a 125amp main breaker and you will need to keep the neutral bus separate from the box, do not use the bonding screw. You will then need to install a ground bar to the back of the box for the ground wires connection.
any thoughts, questions.?

Jun 19, 2010 | Cutler Hammer Cutler-Hammer...

2 Answers

Fitting circuit board

Take pictures of it before you move the wires. Then if you can only move one wire at a time.

Aug 17, 2009 | Washing Machines

2 Answers

Wiring diagrams schematic (boilers)

call me alan 0776 7494009 have books on c, s,y plans

Mar 04, 2009 | Cooper Wiring Devices 1301-7B GROUNDING...

1 Answer

No cable picture

If you have the round black cable (72ohm) There is a center wire, sometime when this connector is screwed on the center wire gets bent and does not go into the center connection of the receiver. This will give you a no signal situation. Check cable wire to see that the center wire is straight.

Jan 17, 2009 | Panasonic PT-56WX53 53" Rear Projection...

Not finding what you are looking for?
Gb Electrical 100 Amp GE Load Center Logo

629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gb Electrical Electrical Supplies Experts

Fahr Quad

Level 3 Expert

736 Answers


Level 3 Expert

85206 Answers


Level 2 Expert

107 Answers

Are you a Gb Electrical Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides